This is a mod to the Expie by adiodat. I turned it into a 2004 Dodge Durango with a 5.9L 24V Cummins Turbo Diesel. Flares are the same, except that the controls were moved 2 numbers up. I added high beams and fog lights, which are controlled with Ctrl-1 and Ctrl-2, respectively. Sounds were recorded from my mom's 2004 Dodge Durango and from a 5.9L 24V Cummins
This is a mod to the Expie by adiodat. I turned it into a 2004 Dodge Durango with a 5.7L Hemi V8. High beam lights are controlled with Ctrl-1, and fog lights are controlled with Ctrl-2. Hidden strobes are activated with Ctrl-4. Sounds were recorded from my mom's 2004 Dodge Durango
Please ignore the police Durango pictures, as I unintentionally selected them [read more]
This is a mod to the Expie by adiodat. I turned it into a 2004 Dodge Durango with a 5.7L Hemi V8. Flares are the same, except that the controls were moved 2 numbers up. I added high beams and fog lights, which are controlled with Ctrl-1 and Ctrl-2, respectively. Sounds were recorded from my mom's 2004 Dodge Durango
UPDATE: Please visit the link below to download the gooseneck version, along with updated suspension, and brakes.
This was a spur of the moment build last night, and just got the skin done late and its a fun truck to do pretty much anything with. It can tow the big dolly trailer, go almost anywhere offroad, and u can put some things in the bed if they fit. It's a mini truck used on farms to do all sorts of little tasks. I made it as simple and fun as possible, with dual frame rails and a hitch. Enjoy
This pack includes three police cars, based on the CERRANO car (rebuilt/updated chally) by ROR Editor.
These cars drive completely differently - ROR Editor did an AWESOME job on the Chally/Cerrano.
Three police cars - a marked unit, a low-profile unit (no lightbar on top, but still a siren), and an unmarked unit (completely civilian, but with a siren). In all three cases, use CTRL-1 to turn on the front and back flares.
This is a sterling bullet flatbed there are 2 versions included a tilting flatbed and a 5th wheel version, all credit for the main truck goes to Box5Diesel, all I did was make the bed, The bed is modeled after a bed that my dad made for his truck, commands for the tilting flatbed are F12 to raise the bed and F11 to lower it The 5th wheel version does not have a tilting bed. I hope you enjoy it P.S. you must have Box5Diesel's Sterling bullet_1 pack for these trucks to work.
Your typical early 50's american sedan(or fasback?).it comes in 2 versions; the first one is a standard car.the second modell has very stiff suspension,upgraded brakes,engine&gearbox, lower roof etc
Unfortunately i'm not that good at texturing.so feel free to paint,just give me credit for the chassis.
hope you are having a great Saturday! here is a Skin/Truck combination. This is not my work!!!!!! It is diesel's mega cab but i made it so you can have this truck and the mega cab alongside each other so i copied the mega cab truck and renamed everything. i did not make this truck file! it is a white CrewMax tundra. here it is! all i did in the truck file was made the turn signals go faster and brought the tires in because they stuck out and made the wheels a tiny bit smaller! enjoy! All credits go to dieselfuelonly for the awesome truck and to me for just about everything else.
UPDATED: The unmarked was fine, but I had the wrong flares and props on the one with the lightbar... now the lightbar is actually there, and the CTRL-1 flares are all blue. Oops. Save this and overwrite the original please!
One with lightbar, one without - I called it "unmarked", but it is a painted car - so maybe "low profile" would be better... But... meh. Deal. ;-)
Requires the Chally that comes with RoR (so that shouldn't be a problem).
(Coldwater is the main town of the St. Helens map)
The reason for the name? In the U.S., at least, "po po" is a cliche (meaning "police") that came about somewhat recently. I think it's an absolutely stupid cliche, but it was shorter that "coldwater_police", and "dodge_challenger_coldwater_police_unmarked_black_ with_onions_on_the_side" felt a bit long... so... "po po" it is. But it's meant to be sarcastic. :P
Place the zip in your packs folder, no need to extract anything. If you downloaded the first sterling bullet normal version, delete that zip and just use this one if it doesn't overwrite the old one, because they will conflict with the same material file and probably crash (so u know what happened if it does crash, just delete the other sterlingbullet zip for the first version.
Here it is, the firetruck version of the sterling Bullet. I've also added a brush guard bumper for the rest of the normal Sterlings thats why u need to delete the first zip if u downloaded it.
This zip includes
All the original Sterling Bullets (now with added front bumper)
As u can see, its got lots of items on it, and lots of new mesh's. Light bar and lights all work, new exhaust mesh for the firetruck, and this thing is ready to go to work.
This is another mod to the BoxDodgeRam. This time, it's been modded into a white 1999 Dodge Ram 1500 with a 5.9L V8 Magnum and 46RE 4-speed automatic transmission. The tailgate, doors, and hood still move. All sounds are from my 1999 Dodge Ram 1500. Special thanks to cummingsflatbed for helping me with the locking differentials
This is a big package that includes the updated Dodge Ram 2500 4x4 Mega Cab, and the RV Trailer that I have been working on.
This pack includes a lot:
First of all is the new Ram: There are 3 Rams included. The Red and Blue Rams are the same truck, with Ranch Hand front and rear replacement bumpers, a headache rack, a 7" single stack, towing mirrors, a trailer hitch, and running boards. The headache rack has functioning lights. The hitch is no longer adjustable, as adjustable hitches are too weak. These Rams are slightly heavier and have a little more power, and lower gear ratios. The tow hooks (ropables) in the front have been replaced with ropes, so the truck can grab from all directions. The chassis has some slight improvements, including more beams for strength, and the rear axle no longer pulls weird on the left side under hard acceleration.
The 3rd Ram is a special Rigs of Rods Public Works truck painted in none other than "RoR Orange". It includes white strobe lights on the front and rear, and also orange rotating strobes on the headache rack. it is geared even lower than the Red and Blue Rams above. With a top speed of 61MPH it is not extremely fast, but has a lot of pulling power. It includes all the meshes and updated features as the Red and Blue Rams too.
In the "Extras" folder included in the .zip there is a blank PSD (can be opened in Photoshop or GIMP) for skinning the truck. All of the sections are labeled.
Also included is the RV Trailer. It is based on a Fleetwood bumper-pull double axle RV.
It has four adjustable jacks on each corner, and an awning that can be extended and retracted. It is very heavy. Bear in mind that it was designed to be pulled with the above Dodge trucks.
*PLEASE DOWNLOAD THE STERLING BULLET FIRETRUCK PACK* instead of this one. The firetruck pack has these normal versions, but with the added nice front bumper.
Sterling Bullet 4x4 1 ton Truck
*Drop the whole zip file in ur packs folder, no need to extract anything.*
There are 4 versions in here
1.The main White Gooseneck hitch version
2.White bumper pull version
3.Red Gooseneck version
4.Blue Gooseneck version
This truck performs alot like a real longbed extended cab would, it does big looping doughnuts instead of small fast ones. It has good traction to get up most offroad areas. It tows nicely, and can take a good jump or two. Overall it's one of my favorite vehicles (not being biased, lol) so I hope you all enjoy it to.
The mesh items include a exhaust stack, tow mirrors, rear bumper, hitches, cab lights, and 5spd cummins shift lever in the cab :-)
This is a all purpose truck with bumper pull hitch. The suspension is setup soft for jumps, but is easily adjustable stiffer for heavy towing. The truck seems to handle better with a heavy trailer behind.
This is the final release with working everything, including front wheelband. Just drop this zip into ur packs folder and if you downloaded a previous version that did NOT fully work, go ahead and delete it and use this one.
It's a good looking 2nd gen dodge, and I hope you all enjoy.
This is a modification to dieselonly's wonderful dodge2500 police truck, I adjusted the lights to have more "accurate" police type set up (atleast this is how most vechicles seem to have it here in america) I based this off one of Louisville Metro Police trucks which have the colored lights in the gril (no white flashers are up front) and two red in back (tail lights) and the two rear white lighs (back up lights)
I tryed to get them so they would flash more of a alternating pattern but not much luck if someone knows how to do this please pm me...
Light Rework: James
Originial Dodge2500: Dieselfuleonly
Police variant: Dieselfuelonly In joy
Differences between this truck and the regular version:
Police version is only available on the Mega Cab / Short Bed truck. It has a little more power and a little more top end speed than the regular truck. It has a tighter turning radius too.
And of course it has lights!
There are red and blue lights on the roof, the grille, and the rear of the truck. They are timed a little different so that they alternate a little bit. One set is controlled with CTRL+1, and the other set is controlled with CTRL+2.
Of course the roof lights are controlled with the "m" key, and the siren with the "h" key.
To install... Download the .zip file and place it in the packs folder of your main Rigs of Rods folder.
This is another mod to dneufeld's Dodge Ram 2500 police truck. It is nearly identical, with the exception of red turn signals in back and Cummins sounds. I also tried to add a police license plate, but it shows up on the bed
Four versions of the Renault Express in 1 file.
Regular version (red): Roofrack, towhook, opening doors
Pimped version (orange/white): Lambo style doors, spinners, hydrolic suspension
Monster Truck: Gullwing Doors, all wheel steering, and weight shifting do to wheelies and stoppies. ;-)
Hearse: Stretched version that I wanted to turn into an ambulance. But we now have the Jeep, Sprinter and a 3rd one under construction, I decided to turn it into a Hearse.
Because the car is too small for all the regular loads, I also included 2 small loads:
Toolbox: can't work without it.
Crate of beer: Also a must-have on any building site.
This is a skin for the VW Buss that i made somewhat replicating The Mystery Machine From Scooby Doo
I Think it is cool. please leave feedback on vehicle. I may start taking requests for custom paint jobs.
Little update : nothing new but I changed the texture coordinates so you can make the two sides of the car different, they dont share the same texture anymore! (Useful if you want to write something on the sides for example, it wont be mirrored)
Rename to no_id_Jeep_Cherokee.zip and copy to your X:/.../Rigs of Rods 0.32/packs folder
Dodge police overhaul
Made to look like Plymouth superbird
back up the original files
i hold no responsibility for damage to anything (game ect)
download my skin i made for it to or else it looks warped and dum
skeleton of what it looks like download the skin for better looks (not warped looking police skin)
feel free to edit just PM before you do edit it and give me credit for the edits
(skin the wing ect) make it work better
Modern ford pack. read the screenshot. please email me if there is anything missing. (email in earlier files).
oh and i forgot to say, only the jeep texture is included in the file so u need to download the jeep prior to downloading this pack