DS9 Off Shore Crane - Science Research & Salvage
Belongs to the DS9 Submarine!
- a 2-bridged overhead crane on the water
- sidewarts extendable main booms to unload onto the land
- a car/cargo deck that can lock down loads and cars.
- a car ramp to drive on/off with vehicles..
- hooks that go under water to pick up sunken ships or loads
- side-thrusters for better manuverability
- underwater flares to see what you lift at night..
it can lift/transport/unload at least 70 tons!
I haven't tried heavier stuff..
This Crane is opensource - do with it as you like..
It can load 1x 40', 45' or 48' are also possible, but that may result in too much front and rear overhang and then the container might hit the tractor unit.
The other possibilities are 2x 20', 1x 20' in the middle or at the end with retracted chassis back.
You can extend and retract the rear end to fit different containers on, and it is possible to adapt the suspension to different heights and loads,
the command keys show up in the ingame preview.
There is also a version with two containers fixed to the trailer for people who don't bother loading or unloading it.
If you want to reskin it please use the GUID system and skinzip files, then you can upload your skins to the repo.
Don't modify anything else or use parts of it on other models without my permission please.
2008 KME Predator fire engine, based on the fire engine from Butler NJ.
- Openable doors and windows
- Tilting cab
- Animated props; driveshafts, light switches, pedals, dashboard needles...
- Can simulate engine torque twisting force (RoR first)
- Comes in 2 versions; caterpillar and detroit, both equiped with allison 5 speed auto transmission
- 22 commands (F1 to Ctrl+F12)
- 9 custom lights (Ctrl+1 to 9)
-Default light bar flares showing on the roof when "M" was pressed
-Broken turn signal
-Mirrors are back again
-Added Eminox's engine/gear ratio & driving aids
-Now accept .skinzip files
-Detroit and Caterpillar version are combined into the same .truck file, use the in-game menu to make your choice.
Starling 911, this is Starling Engine 1 responding. Yes ladies and gentlemen, I this is my first upload, and I have made a skin for the KME Preditor by Cydvx and Pascal. With Cydvx's permission I am releasing it. Now mind you this is a Standalone skin, Instructions are in the zipfile. they should help you.
Credit: Cydvx and Pascal for the original KME and Blank skin [read more]
-front legs cylinders are stronger
-front tires are stronger
-visuale bugs of hinge points fixed
-change what of color
-legs visual better
-added jib version
hook A pallet press ALT-f12 ,unhook the pallet press ALT-f11
For the first start the hook is on ,so you have nothing to do.
You can pickup the palletlifter with press h (this crane has an hook-node in the hook) or O just for other cranes.
Drive the truck under the box ,it will automatic hook the box .
Press CTR+ALT f1 for legs in .
For unhook the box press ALT+L
alt+ f1/f2 legs left in/out
alt+ f3/f4 legs right in/out (use right alt ,left the game will close)
alt+ f5/f6 legs left in/down
alt+ f7/f8 legs right up/down
alt+ f9/10 leg front up/down
ctr+alt f1/f2 legs loadingbox up/down
ctr+ f1/f2 boom1 in/out
ctr+ f3/f4 boom2 in/out
ctr+ f5/f6 boom3 in/out
ctr+ f7/f8 boom4 in/out
ctr+ f9/f10 boom5 in/out
ctr+ f11/f12 boom6/7/8 in/out
f9/f10 jib booms in/out
f11/f12 manual jib booms in/out (works only when the hook is not loaded)
L hook /unhook trailerhook or cranehook
alt+ F11/F12 unhook/hook palletlifter
Here is my Hyster top spreader i made for the vast amount of growing containers RoR has acquired.
Thanks to my beta testers for feedback.
once spawned the hyster will bounce a little just press backspace and it will be fine.
to hook onto a container slowly drive to the center of the container and extend the spreader(the spreaders extends more than the container so you do not have to be dead center to hook onto the container properly)
Make sure all 4 ties are secured and lift with the engine reved.
There is a readme with the controls.
Hello users of the rigs of rods forum, today I proudly update the FLC. Most of you know what it is, a school bus. many of you might be saying "aw crap, another CE mod." but, this is not the case. This has custom sounds, custom preformance, the ACX mirrors, newly positioned crossing gate, new flares, and new warning lights. credits for original CE go to the following:
So, I'll give you a little background knowledge on this bus.
I always wanted to drive a bus that I, and only I have dreamed of. I figured that I could find something on the site that was cool and wasn't just another CE. so I decided to read up on how to mod Rigs, it was certantly easier than other simulators I've seen in regaurds to modding it. That is how I ended up in this position with this bus. Please note that it is not fully completed so with that said, It still has no interior and only sub-mesh.
Updated sounds. Hooray! Feaetures the ASP flAilus, Enginefan vervion, and W/O engine fan sounds for the norm.
The newer authors to this bus would include:
Me (tomytom99): sounds, preformance, skins, and moving the crossing gate down.
ROR-EMS: mirrors and mirror placement
Here is the thread for the FLC: [link]http://www.rigsofrods.com/threads/91010-ASP-FLcolumbus-Once-Again-Updated-6-26-12-going-onto-repo[link]
More updates are coming, so be alert! once it is done, the will be a naedox quality video. Note: I will sometimes find a problem that you guys have. Most of the time you will need to find the problem, and I will fix it.
The bus now has about 15 skins, including dealership skins, a blank skin, and a NJDOC skin.
will crash game in MP and also flatsville, in both sp and mp.
Pack now includes 2 P-boom versions.
This is the FLK-1500, a strong crawler crane and designed by AIN_002. The crane is not mapped but you can still skin some parts and change colors of meshes. I recommend downloading the skin pack from Rotexx. Uploading your own skin is allowed but please upload it as a skinzip.
F1/2 - Rotating the crane
F9/10/11/12 - Moving the tracks
You can view the rest of the commands in the T-screen
This pack includes 6 cranes
- FLK-1500 with 108m boom
- FLK-1500 with 108m P-boom
- FLK-1500 with 58m boom
- FLK-1500-NT with 108m boom
- FLK-1500-NT with 108m P-boom
- FLK-1500-NT with 58m boom
There might be coming more version of this crane like something with a jib but that will be a matter of time.
This zip also includes counterweight for the crane, which can simply be locked to the back of counterweight-arm with L!
Oh and before more people start crying about this: The counterweight can't be lifted off the ground when there is no heavy load in the hook! (which is logical and real!).
Here is the first US rolling stock, so you can finally tow some waggons with my ALP.
A loadable 40ft boxcar, comes in several liveries.
You can open the doors by grabbing the levers at the doors, the couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
If you enter a boxcar through the vehicle selection menu game will crash if you try to exit the boxcar, simply change into another enterable vehicle via the menu and exit there.
donoteat, maddrix for skins
sputnik_1 for helping me with adjusting the node/beam.
This is an skin for Lenni's Man TGS 32.350 LTF 1060 Crane Truck.
I've skinned it to an "Feuerwehr Kran" With the marking 'KW-065'
This is an fictional skin loosely based off real german fire apparatus. [read more]
Hello, I'm here to show a skin that created the MB Atego COMAX, with permission of the coco, the company's Brazilian postal service called Correios or Sedex.
Show some pictures and hope you like it.
Credits to Coco and Pedro, creators of the vehicle.