|
|
|
Browsing tag Crawlers, found 49 matching files. (2 pages)
|
|
|
I built this crawler for the build a crawler contest. I gave it high ground clearance, low center of gravity(lots of low nodes), four wheel steering, and good size tires. Put it all together, and you have a crawler that performs flawlessly. This is the best four tired crawler that i have driven. THIS THING WILL GO ALL THE WAY TO THE TOP OF THE ASPEN ROCK WALL, there is some skill required though.
F1-F2 = rear steering |
| |
| Tags: | Crawlers |
Downloads today: 0, all time: 5841 |
|
No Comments yet. Add some here.
|
|
|
An updated version of my old rock jock. This is the smaller version. Enjoy!
(BTW, been super busy/ thats my excuse for not being on in so long, finally got a little free time |
| |
| Tags: | Crawlers |
Downloads today: 0, all time: 4899 |
|
No Comments yet. Add some here.
|
|
|
Presenting the MICRAWLER
It was all created by me and its not 100percent done. I have just decided that i am going to move onto bigger and better things. I am starting to use AC3D and this was created with both AC3D and sketchup.
Anyways instead of collecting dust i decided i would release it.
-There are two version a Rotational version and a non-rotational version.
Without further adu enjoy. |
| |
| Tags: | Crawlers |
Downloads today: 0, all time: 4557 |
|
No Comments yet. Add some here.
|
|
|
this guy is a crawler loosely based off of Shannon Campbell's old competition rig.
this was the first mod i ever made- back when i first joined. i recently added a working light-bar, and meshtires from my G2 suv.
apart from that, everything on it is the same- its very simple and has a few quirks that i dont plan on fixing. it may not be pretty,
but it will go up almost any obstacle with ease. i guess youll enjoy this if you have a slow computer like me: power to the n/b!!!!
features:
automatic rear steering, lockers, and lights.
enjoy! |
| |
|
|
One Comment, add comments here.
|
 (updated on 5/8/11)
|
UPDATE: I've been working on a variation of my own and it's complete, or close enough. It is fully submeshed and will contact with other vehicles(that must to be contactable). It's sides and tail can fold down. The rear rollcage can be lifted using Ctrl+F4/Ctrl+F6. It has ties in the back so you can drive an vehicle into it. Unfortunately all the stuff I added makes it too "tippy" to carry a vehicle into water anymore but driving on land is fine. Also has a trailer hitch that can be completely folded away if you're not going to use it. All controls are listed in-game. Have fun.
This is an Tatra 813 pack I modified from Pricordes original versions and added "Wheels2" to all of the models so you can inflate/deflate the tires. Also updated to work properly in the latest RoRs release as it was having texture issues before. Use [ to deflate and ] to inflate the tires. This is not as easy on your system as the originals were. They were only about 1300 beams before, now each has over 2800 to properly simulate the wheels.
NOTE: You will need to enable advanced wheels in the configurator under the "CPU" tab to enable "Wheels2" in versions older than 0.38.33.
Please note the credits for the crane go josh (1239) who made the original.
**Cameras are fixed |
| |
|
|
3 Comments, add comments here.
|
|
|
This is a crawler version of adeodats jeep. its really good at crawling and has lots of grip. its my first ever mod and upload.
Skin:LOT 737-300
Actual Car:Adeodat
Modding:By me |
| |
| Tags: | Crawlers |
Downloads today: 0, all time: 3816 |
|
No Comments yet. Add some here.
|
|
|
this is just a slightly modded version of 1CHEVROLET1's F650 Crawler. all i did was made it have ner rims and made it a little faster. it is also my first mod and upload.
origanal truck: 1CHEVROLET1
modded truck: Speedy712
all credits go to 1CHEVROLET1!!!!!!!!!! |
| |
|
|
One Comment, add comments here.
|
|
|
hi, here is a ford f-650 RBP truck i mainly worked on the front and back of it, i added a RBP grille, RBP diesel performance logo on the hood, RBP logo mud flaps, and RBP rims. All the credit does to the orignal authors. It has good susupension great for crawling and even baja yet hard enough to keep it stable, also large tires and a large which are good for mudding. so this is basically an all terrain ford, have fun with it. P.S the screen shot doesn't do it justice |
| |
|
|
One Comment, add comments here.
|
|
|
Authors: sirendude 2011 and various members for support.
This is a pack of all of the vehicles I have made in the past 4 months. All of the cars are N/B only, don't have submesh, and some have no engine tuning.
none of these vehicles float, and one car (siren's auto 12x12 special) has all wheel drive, all wheel steer, working reverse lights, headlights, brakelights, and turn signals (flares). Some vehicles have opening hoods and doors.
Vehicles in this pack:
a 6x6 pickup truck called "mud slinger" (includes a Monster Truck version)
a 4x4 pickup truck simply called "pickup truck"
a few muscle cars/ sportscars (they are "highway terror", "lancia delta N/B Car", "tire burner", and "muscle car")
a school bus
a few offroaders ( they are "rock locker", "redneckrickem's dune buggy" (a YouTuber's buggy), "traxxurator"+"traxxurator dump" and "4x4 offroader")
a motorcycle (it has training wheels for stability :P)
and an engine that uses negative shocks to run, just give it a spin with the mouse and it runs. (be careful it explodes after a certain RPM)
You have the freedom to do whatever you want to these vehicles, but give me credits for the vehicle's N/B.
To open a hood or door, press F1 - F4. These commands do different things like open and close a door or hood. |
| |
| Average Rating: |      | Tags: | Light Vehicles, Fun Mod, Other Loads, Allwheeldrive, 8x8, 6x4, 4x4, 4x2, Fantasy, School, Buses, Offroad, Semi, Transportation, Heavy Machinery, Crawlers, Offroad, Land Vehicles |
Downloads today: 0, all time: 3576 |
|
4 Comments, add comments here.
|
|
|
My new crawler.
i called it Beams Glory beacose i think it turned out very nice using only beams, and this car glorefies the "old school" beams.
to get the colors correct you will need to extract the material file i included in the truck's zip into the materials zip in resources folder that can be found in the main RoR folder (not the one with all your addons).
the reason i modefied this mat file and didnt created a mat file for the truck is so i can paint my truck's beams fast and easy with so standart colors i created. take a look in the file to see what other colors i made and add you own.
i hope it will work for any one.
have fun |
| |
|
|
One Comment, add comments here.
|
|
|
The Turtle V4.0
newest Evolution of the Turtle, updated suspension, new meshes, flares, new skin, recovery mechanisms, etc.
one thing, I strove for realism on this truck, so no more crawling up the side of a building...
light commands (ctrl+):
1: rear lights
2: left hand side
3: right hand side
4: under carriage
this truck version is meant for 0.33 and greater, there is wheels2 in the file but because I'm not happy with the settings, and can't get settings that I'm happy with.
the name of the .truck file is theturtle4.truck in case you want to load it from command line
enjoy!
Discuss Here |
| |
| Average Rating: |      | Tags: | Crawlers |
Downloads today: 0, all time: 2982 |
|
One Comment, add comments here.
|
|
|
This is my Killer Pack it includes a crawler, bouncer, sandrail, and two differently tuned prerunners.
All completely done by Me except for rims on the sandrail. (Made by Lifter.)
They are about 85% done but I don't have time to finish them but, if you wanna finish them just give credits where they are needed.
Link to further discussion: Killer-Crawler
This was mostly a good way for me to practice making meshes and submeshes so they aren't very good. |
| |
| Average Rating: |      | Tags: | Fun Mod, Jeep, Ford, Dodge, Chevrolet, Categories, Land Vehicles, Axle Configuration, Vehicle Keywords, Allwheeldrive, 4x4, Racing, Street, Light Vehicles, Crawlers, Offroad |
Downloads today: 0, all time: 2928 |
|
2 Comments, add comments here.
|
|
|
I modded Deezle's version of the Baja Renault, well here it is. All I did was redid the suspension, and it performs good, but it tips like Deezle's version. You will need to download Deezles version for this to work as its only a truck file. I renamed the truck file so it will not conflict with Deezles version.
=====**Quick Disclamer**=====
1. This is not a racer or offroader, its a crawler!!!
=====**Credits**=====
Pricorde- Renault Terrain Editor
Aperion- Original Baja Renault
Deezle- Modded Baja Renault
Me(Qer)- 2nd Modded Baja Renault
==================
**You may mod and redistribute, but you must contact me and Deezle** I don't know why but I put the truck into Street Car menu on the the truck list ingame.
|
| |
| Tags: | Crawlers |
Downloads today: 0, all time: 2637 |
|
No Comments yet. Add some here.
|
|
|
This is the second version of my 4x4x4 rock crawler. Ive made a few improvements that increase this trucks performance drastically. These include
Fully triangulated 4 link suspension
Lighter axles
Appropriate shock specs
More responsive engine
All this means the suspension is a lot more flexy and has an easier time articulating.
And as per request I no longer have street tires on it, they have been upgraded to BFGoodrich Krawler T/A KX. COMPLETE WITH DIRT! 
4x4x4 HomeBrew Rock Crawler V2 Discussion |
| |
| Tags: | Crawlers |
Downloads today: 0, all time: 2422 |
|
No Comments yet. Add some here.
|
|
|
This Is a Crawler Chassis.... it can plow through tough terrains like Green Acres...
Author- rahulroy9202
Link to further discussion: Didn't create a dedicated thread for this..
but you can post your views here- JEEP-WILLYS-1942
your feedback is very much appreciated...
Features-
1.> 4x4.
2.> Lockable Differentials.
3.> Traction Control.
4.> Very good articulation.
you are free to use this as the base for your creations as long as you credit me... |
| |
|
|
One Comment, add comments here.
|
|
|
Here is another version of my Ford F-650 I put ford logos on it new rims and a blue strip on the side and that pretty much it. and it won't overwrite the RBP version. It is the same as the RBP truck just skinned differntly. Have fun with it |
| |
|
|
No Comments yet. Add some here.
|
|
|
This is a node-beam structure for a JEEP WILLYS 1942...
It is a good off-road vehicle (rather call it a Node-Beam Structure)...
If anyone is interested in finishing this, please let me know.
credits- rahulroy9202
and
I would also like to thank my buddies KaptainKrunch97 and Blazinator and Creak for their support.
latest version of this vehicle fitted with a mesh can be found in the following forum...
For further discussions visit-
JEEP-WILLYS-1942
Features-
1.> 4x4
2.> Lockable Differentials
3.> Traction Control
4.> Very good articulation.
etc...
It was sitting on my HDD without any progress and it wasn't laying eggs... So it was time to release it.. |
| |
|
|
4 Comments, add comments here.
|
 (updated on 19/3/12)
|
UPDATE- 3/20/2012- CRASH PROBLEMS SLOVED
my first truck. Check it out.
a chassis with independent suspension, AWD, Traction Control, Locking Differentials.
Link to further discussion: MARCH-TRUCK(my-first-truck)
final version 0.04 (as of now)
Modifications-
1.> All four suspensions works like a charm... Flexing Good.
2.> 4x4 drive with traction control and lockable differentials.
3.> Weight of vehicle is revised.. CG lowered.
4.> Stable Wheels.
you are free to use it for mods or develop on this.
Just remember to give me credit.
|
| |
|
|
6 Comments, add comments here.
|
|
|
4x4x4 A Rock crawler buggy, 4 tires, 4 wheel drive, 4 wheel steering, front and rear 4 link suspension.
I think this performs much much better than the stock rock crawler that comes with RoR. This is also my first truck, let me know what you think
discuss here |
| |
| Tags: | Crawlers |
Downloads today: 0, all time: 1377 |
|
No Comments yet. Add some here.
|
|
|
Just some off roaders that I made they have no bodies so you can add whatever you want and you do not have to ask for permission to modify and post |
| |
|
|
One Comment, add comments here.
|
|
|
This is my crawler. It crawls stuff. Also my first ever working N/B. I know, it has no mesh, the N/B isn't perfect, it rolls over if you turn over 20mph blablablabla. If you don't like bare N/B chassis', then don't download and post a 1 star rating because it doesn't have a billion poly mesh and complicated crash physics.
Try to enjoy it. |
| |
|
|
5 Comments, add comments here.
|
|