|
|
|
Browsing tag Trailers, found 76 matching files. (4 pages)
|
(updated on 16/12/12)
|
Trailer P-32 is designed for quick transport wheeled and tracked vehicles and other material to the weight of 40 tons. In an emergency, up to 46 tons, maximum speed may be 10 km / h Is designed for off-set with tractor on roads I to III. class, the roads are paved and after tolerable terrain without external imbalances and obstacles.
Technical and tactical data
Dimensions:
- Total length (including shaft): 9475 mm
- Overall height: 1420 mm
- Height of the loading area: 1000 mm
- Overall width: 3100 mm
- Wheelbase: 4410 mm + 1000 mm
Loading area:
- Length: 4900 mm
- Width: 3100 mm
weights:
- Standby: 10,600 kg
- Payload: 40,000 kg
speed:
- The permissible maximum: 40 km / h
f1/f2 raids
forum link: P-32-Trailer
update: flexwheels nodes fix, frame model fix,
|
| |
|
|
 15 Comments, add comments here.
|
|
|
here is an aluminum dump trailer i made on request.
you can skin the name ice-corp and all the other parts of the trailer by editing the .dds
have fun
controls: ctrlf9-f10 legs ctrl f11-f12 dump
problems? ice-corp-dump-trailer |
| |
|
|
|
4 Comments, add comments here.
|
|
|
This is a new skin for the Wabash Trailer, only this one makes a 2nd NASCAR skin. The skin is based off the 2nd legend in NASCAR , Dale Earnhardt. This replaces the original skin, so make backup if possible. Have Fun. Credits: Nadeox1 for the trailer, and me for the reskinning. I did get permission from him through skype.( [1:45:50 AM] Nadeox1: I made that trailer to be skinned. just don't release the whole pack, just the skin.) Link to the trailer for download:.53-Wabash-Duraplate |
| |
|
|
|
No Comments yet. Add some here.
|
|
|
This is a Krone Box Liner container chassis.
It can carry 20' or 40' containers, compatible containers are in this pack:
http://www.rigsofrods.com/repository/view/4251
It can load 1x 40', 45' or 48' are also possible, but that may result in too much front and rear overhang and then the container might hit the tractor unit.
The other possibilities are 2x 20', 1x 20' in the middle or at the end with retracted chassis back.
You can extend and retract the rear end to fit different containers on, and it is possible to adapt the suspension to different heights and loads,
the command keys show up in the ingame preview.
There is also a version with two containers fixed to the trailer for people who don't bother loading or unloading it.
If you want to reskin it please use the GUID system and skinzip files, then you can upload your skins to the repo.
Don't modify anything else or use parts of it on other models without my permission please.
The truck is not included, but you can get it here:
http://www.rigsofrods.com/repository/view/3902
The map is not publicly released yet.
Feedback and comments:
Container-chassis
Thanks to tdev for the container skin and thanks to the beta testers and sorry that this project took over 4 years to be completed... |
| |
|
|
|
12 Comments, add comments here.
|
(updated on 14/8/12)
|
Im going to make this simple. Its Called LowPro. Simply stands for low profile. 
Controls
Raise/Lower----CRTL + F1 / F2
Sliding Rear Axle----CRTL + F3 / F4
Fetures
Ajustable Ride Hight
Sliding Axles
Version
Single Axle
Dule Axle
Dule Axle Gooseneck
Tri Axle Gooseneck
Fixed 81Ton Load - Gooseneck
Credits.
Ravidnas1 - All
Support - Lots, Mainly ITOWU
Flares - DJ|Jasper - Thank you so much!!!
Disscuse - Here! |
| |
|
|
|
22 Comments, add comments here.
|
|
|
This is another mod for the Dryvan Trailer, only this time, it is a McDonald's trailer! So far there are no problems loading the trailer itself, so all you just do is just download and play! Btw, place it under packs/streams/vehicles for it to work properly. Have Fun! Credits: Trevor for the trailer, and me for the skin.
Also, delete the original dryvan trailer because this one overwrites it. |
| |
|
|
|
4 Comments, add comments here.
|
|
|
My (edited) version of the side dumpers.
these are not mine. trevor made the trailers and i made the weyerhaeuser skin. |
| |
| Tags: | Trailers |
Downloads today: 0, all time: 772 |
|
|
No Comments yet. Add some here.
|
|
|
I made another skin as promised. 
it is a billboard of Starling Island,
you can put it behind the minibus. I would do more if you like them
|
| |
|
|
|
One Comment, add comments here.
|
(updated on 12/4/12)
|
Hello, I released my second mod
it is a billboard in the colors of RoR, soon will come from other
skins. The credit goes to the author of the original billboard. |
| |
|
|
|
No Comments yet. Add some here.
|
(updated on 17/7/12)
|
Here is the first US rolling stock, so you can finally tow some waggons with my ALP.
A loadable 40ft boxcar, comes in several liveries.
You can open the doors by grabbing the levers at the doors, the couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
Known bugs:
If you enter a boxcar through the vehicle selection menu game will crash if you try to exit the boxcar, simply change into another enterable vehicle via the menu and exit there.
Thanks to:
donoteat, maddrix for skins
sputnik_1 for helping me with adjusting the node/beam. |
| |
|
|
|
12 Comments, add comments here.
|
(updated on 29/3/12)
|
This is a Philadelphia Eagles skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder. |
| |
|
|
|
No Comments yet. Add some here.
|
(updated on 29/3/12)
|
This is a USAF skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder. |
| |
|
|
|
No Comments yet. Add some here.
|
(updated on 29/3/12)
|
This is a Walmart skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder. |
| |
|
|
|
One Comment, add comments here.
|
(updated on 29/3/12)
|
This is a Detroit Lions skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder |
| |
|
|
|
No Comments yet. Add some here.
|
(updated on 29/3/12)
|
This is a Cincinnati Bengals skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder. |
| |
|
|
|
One Comment, add comments here.
|
|
|
Rbns 641 freight car
All content is for use in Rigs of Rods only!
Use RoR 0.38.67 for this!
Features
- Detailed meshes
- Realistic buffers, coupling
- Custom sounds
- Animated stakes
- Hook system to fix your loads
Instructions
- Coupling is done by pulling up/down the orange cylinders (nr. 1 and 2) at the edges with your mouse. Click here for a tutorial
- You can fix your loads by pulling down the orange cylinder nr. 3
- When you are in a locomotive, use Ctrl+F1/2 to retract the collision box and Ctrl+F3 to flip the stakes
Credits:
- Sputnik_1: meshes, node and beam, sounds, textures
- BigBoy: much help and testing, thanks a lot!
- The Inviteds: testing
This is not compatible with BigBoys Bombardier ALP!
Support Thread
|
| |
|
|
|
5 Comments, add comments here.
|
|
|
This is my Car dolly. It is straight submesh and very easy on FPS. This is more of a proof of concept as apposed to a full on new modification. You can use almost any vehicle to tow any other vehicle. Since it is submeshed you can scale it to be used on any vehicle rather easily. As of right now this is considered to be in beta. On a side note it is currently impossible to tow any vehicle with contacters. You will have to comment them out or watch them be destroyed by the wheel clamp.
Also feel free to modify and redistribute. Credit is not necessary but it is appreciated.
http://www.rigsofrods.com/threads/85...969#post943969
Commands
F1-F2= Landing gear
F3-F4= Main ramp
F5-F6= Locking mechanism |
| |
|
|
|
3 Comments, add comments here.
|
|
|
This is a skin for Lenni's Selfsteering trailer.
I skinned it to represent a wagenborg nedlift trailer.
As I used the .skinzip system, I may upload this. |
| |
|
|
|
3 Comments, add comments here.
|
|
|
Here is an inclosed bumper pull car trailer I made. The dimensions are: 7.62m or 25ft long, 3m or 9.8ft wide, and 2.4m or 8ft tall. Also it includes a .psd and .pdn texture map to make you own
texture. controls: CTRL + f1 & f2 = landing gear, CTRL + f3 & f4 = ramp
Credits
DODGE charger (me) = everything
Joebus = help with submesh
Please get permission before you release a mod.
Here it is hope you enjoy!
Discuss Here: Inclosed Car Trailer [RELEASE] |
| |
|
|
|
9 Comments, add comments here.
|
|
|
This is a blue reskin for the Selfsteering Trailer and Dolly by lenni
i have used the skin system so just drop it in packs and it will work.
also because i used the skin system i am automatically allowed to upload this, as lenni said.
Credits
Trailer & Loads: Lenni & Fidoj
Reskin: Dereksh97 |
| |
| Average Rating: |  | Tags: | Skins, Trailers |
Downloads today: 0, all time: 2413 |
|
|
One Comment, add comments here.
|
|
|
Selfsteering Trailer with Dolly
How to use:
Pull the trailer next to the load so the rear part is at the right place.
Disconnect the rear part with F11 and pull the front part to the front attachment point.
Use a crane to put the load on, the wood load also has invisible legs so it can be loaded without crane, use F9/10.
The steering strength can be adjusted with F5/6 to fit to the length of the load.
The rear part has manual steering for special situations: F7/8, don't use when the steering is already at maximum angle!
The legs fold in automatically if you pull them up with F1, hold F2 until they fully fold out.
The load will attach on the trailer automatically once it is close enough to the right position.
To unload push F12, but attach it to a crane first and put enough tension until the trailer almost lifts off!
Thanks to Lifter for the hookgroups and triggers and for support with this project!
Thanks to fidoj for his roof part load!
Please do not modify this without my permission,
skins can be added using the skin file system:
skins-working
If this system is used properly then no need for my permission for skins.
Talk about it here:
Selfsteering-Trailer-and-Dolly
You need a RoR version with working hookgroups and triggers to use this, 0.38.40 and up! |
| |
|
|
|
|
22 Comments, add comments here.
|
(updated on 27/2/11)
|
A telecopic trailer based on OVB-55-03V(T) model from Nooteboom.
features and commands:
- can extend up to 40m (CTRL+F1/F2)
- manual steering (F7/F8)
- adjutable suspension (CTRL+F3...F8)
- drop sides, to prevent falling loads (CTRL+F9/F10)
- fully working ligths
- avaible in 3 colors: red/yellow/blue
All commands are written on the front left side of the trailer
Discuss here:
Nooteboom-Teletrailer
links for other loads or truck from the pictures:
the truck: 2501
the boat: 2685
the wind turbine blade(beta): http://www.rigsofrods.com/attachment...2&d=1298568127 |
| |
|
|
|
21 Comments, add comments here.
|
|
p-32.zip
view details
Gold
Silver
Bronze
