|
|
Browsing tag Tractors, found 40 matching files. (2 pages)
Download all 40 files: Tractors.zip (about 129.50 MB)
|
|
|
You need Simp's Caterpillar D9 for this to work.
A concept for attachement I thought of a while ago, and Simp's Dozer was a good vehicle to test it on.
This modified dozer has a "claw" (with contacter polys) that can grab a square rack on the attachment.
(The picture shows a test crate, but in this zip I included the original blade with the same pickup system)
F3/F4 for the trailer hook
F5/F6 to raise/lower the arms
F7/F8 to open/close the "claw"
When the blade is attached: F11/F12 to tilt it a bit.
It may take some practise to attach the load The heavier the load is, the sooner it will fall off on a bump.
Feel free to make other attachement, or use/improve the concept for other vehicles.
Discuss the swapping concept here
Click here the the Bulldozer thread |
| |
| Tags: | Tractors |
Downloads today: 0, all time: 11234 |
|
 No Comments yet. Add some here.
|
|
|
This is a project i had made a logn time ago but i made it poorly. Some of you might remember the first version of my dozer.
If no well here is the second version that is tons better. This is a John Deere 450G bulldozer. I made it based off a
friend of mines actual machine. (the texture is from google) It has a 4-Way Blade and a ROPS canopy.
I used wheels cause the tracks are laggy and the break once in a while. I would not have been able to do this without
the help of Box5diesel. Without him I wouldn't have the meshes placed or the texture right. He helped me tremendously.
I just made the meshes and the dozer and threw the skin on it. This dozer is all mesh but can be converted to flexbody
when 0.36 comes out (AC3D flexbody meshes dont work yet)
Have Fun!
**P.S. More construction equipment is on the way!**
|
| |
| Tags: | Tractors |
Downloads today: 0, all time: 13474 |
|
|
No Comments yet. Add some here.
|
|
|
This is a aircraft tow tractor that doesn't need towbar and works.
I know that there are things that needs improvement. Textures, flares, brakes etc. It's my first try and the first version.
It is easy to use. You just have to hook the front wheel of the aircraft and lift it a bit. Be sure to hook to a node and not in the tire.
It is able to tow aircraft, up to the Antonov 12 or the B-29. (For the An-12, it is easier if you modify the node 180 in An-12.plane and replace the n by a l.)
See thread |
| |
| Tags: | Tractors |
Downloads today: 0, all time: 10725 |
|
|
No Comments yet. Add some here.
|
|
|
Here is 2 updated versions of Nitro's excavator.One with A thumb and one without one,Simp made the rotator more stable.I made the excvator have a thumb,more commands,help file,i canged the skin,the thumb & bucket has contactors so you can pick stuff up with it,and if you can't do that,the bucket has ties so you can pick up a load that way,it also has ropables on the wheels (along with rollon) so you hook it up on a trailer.i also added many hydros to the excavator so the boom sways less.there might be another verison of this machine soon to come with diffrent attachments (only a rumor not true yet)
You cna find this on the other land vehicals section when you start up ror all the way on the bottom.
Relased with promission.
Nitro-orginal excavator
Simp-rotator mods so your excavator dosent wooble
kenworth-for making the thumb and the other edits to the excavator. |
| |
| Tags: | Tractors |
Downloads today: 0, all time: 26889 |
|
|
No Comments yet. Add some here.
|
|
|
Here is a WIP Scania snow plow. It is a mod to pricorde's Scania Loader. It is fun to drive around with when you are bored.
Controls:
F1/F2: Dump body up/down
F3/F4: Front main plow up/down
F5/F6: Wing plow up/down
F7/F8: Dump body tailgate-TEST
This style of plows are my own design, and act almost exactly like the real thing.
To do:
Front plow mesh
Wing plow mesh
Dump body mesh
Tailgate mesh
Dump body N/B tweaking
Tailgate Commands
Submesh plows/ dumpbody/ tailgate
Done:
Front plow N/B
Wing plow N/B
Dump body N/B structure
Tailgate N/B structure
Leave any bugs here, and remember that it is still WIP. |
| |
|
|
|
5 Comments, add comments here.
|
|
|
Class lexion 570 Montana FINAL Version by Rockport 19
for Rigs of Rods
Features:
-very big combine harvester
-Its the first Combine Harvester for RoR ( Correct me if Iam wrong! )
-many real functions ( F1-F10; press T ingame)
-nice tire textures
-real handling ( dont drive it like a racecar)
-my first truck for RoR
Known Bugs:
-not complete submesh with bugs
-very fragile ( rearaxle can broke sometimes)
-wrong position when spawning
Feel free in modding but notice my name ( Rockport19 ) in the Readme
This combine is not finished but I release it now because other projects are waiting 
Future Projects:
-Improve the Submesh
-Making a TerraTrac version of this thing
Enjoy it !
!!!PLEASE UNPACK THE ZIP FILE INTO YOUR TRUCK FOLDER!!! |
| |
| Average Rating: |   | Tags: | Tractors |
Downloads today: 0, all time: 18327 |
|
|
One Comment, add comments here.
|
|
|
Case-IH Magnum 8950 5th-Wheel Edition - Skeleton (synonymous with model 8920 - Skeleton)
>>'Skeleton' signifies this is just the frame, no submeshes, skin, and props
###SPECIAL COMMANDS###
F4/F5 -> Raise/Lower 5th wheel hook
F6/F7 -> Extend/Retract 3 point hitch
F8/F9 -> Raise/Lower 3 point hitch
###
Description: The 5th-Wheel Edition includes a 5th Wheel Wagon that is hard attached to the 3 pt. hitch. This wagon makes it far more practical to haul 5th wheel loads than the 8950/8920 standard edition. In addition to the trailers not being inside the tractor now, the back of the tractor doesn't take all the weight causing the front to weight less thus making the front wheels much less grippy. Now the wheels of the wagon take the weight, and the tractor remains balanced in weight. Nevertheless, 12000 Kilograms of weight is added to the front of the frame via "load" nodes.
Installation: Unpack this .zip folder and move all files (SideRearSS optional) to your RoR->data->trucks directory.
I recommend installing my custom rims (so called 'Spectre'), available in the "Other" category from the Repository.
Credits: Thanks to Polo for doing the steering hydros and help with frame work of the tractor itself |
| |
| Tags: | Tractors |
Downloads today: 0, all time: 1092 |
|
|
No Comments yet. Add some here.
|
|
|
OLD VERSION!
This is a john deere 490D hydraulic excavator. It is mostly mesh and will be capable of flexbody eventually. This machine preforms pretty well I think.It has taken a long time to create but it is finally finished. the mesh has no backmesh so you can kindof see through the cab. i have made controls on the inside and mesh tracks for looks. the bucket is a submesh and can be contactable for lifting stuff. on the end of the bucket there is a bar with commands to be used to lift things up. It has ties on the end so you can lift the rear ends of cars.box5diesel helped me out with the meshes and normal support questions. The other versions of this will be released soon but i need a break from modding.
CREDITS:
chassis: Cumminsdiesel
Meshes: Cumminsdiesel
texture:Cumminsdiesel
Help: Box5diesel
Now to control this beast:
swing right/left- f1-f2
main boom up/down- f3-f4
dipper boom in/out- f6-f5
bucket curl/uncurl- f7-f8
lifting bar up/down- f9-f10
***LIFT UP THE LIFTiNG HOOK ALL THE WAY BEFORE DRIVING!***
Some minor known bugs:
tends to not want to climb up the ramps for a trailer.
the boom meshes shake once in a while
the mesh for the cab has no backmesh therefore you can see through it
The machine will wobble immencly if you do not LIFT UP THE LIFTiNG HOOK ALL THE WAY BEFORE DRIVING!
the future versions to come are:
hydro hammer
quick attach
grapple
tilt bucket?
enjoy~ |
| |
| Tags: | Tractors |
Downloads today: 0, all time: 13566 |
|
|
No Comments yet. Add some here.
|
|
|
Added a winch to Simps and Trevors D-9 Dozer.
Use f9 and f10 to use the winch f3 and f4 to lower the leg so you dont slide
DOES NOT OVERWRITE just save to packs folder |
| |
| Tags: | Tractors |
Downloads today: 0, all time: 2549 |
|
|
No Comments yet. Add some here.
|
|
|
Ok
Here it is from the Garage of CD Fabrications. THE JD490E EXCAVATOR V-2!
It is an excavator, it seems to work well. Has a thumb for grappling things, All mesh, The cab Bug has been fixed. You can now see the inside of the cab. A quick change Variation has been included. There are 3 different attachments. Claw,Hydro hammer, and a bucket.
The QA Variation can pick up my Jersey Barrier quite good. The machine will load on a trailer but, it doesn't like it very much. This machine is kinda fun to mess around with. It can lift a good amount of weight. Has easy to adjust counter weights ( just change the cargo mass ).
The reskins will be released later on the forum. in the thread for the excavator. Other attachments and a wheeled variation of the Quick change machine will also be in that pack.
Enjoy this machine from CD Fabrications.
|
| |
| Average Rating: |  | Tags: | Tractors |
Downloads today: 0, all time: 42003 |
|
|
|
3 Comments, add comments here.
|
(updated on 16/2/12)
|
I have worked very hard over the last few months on this backhoe and were still just getting started.
This is only a beta, So dont exspect the best, And its not done yet so dont rate 1 star saying its not done, i know....
You need to delet the old one for this one to work!
Update V1.1
Redid front bucket - Larger
Re textured the bucket, Less cat logos, and just better looking.
Fixed wight problem, Now can be operated with no wheelys
Fixed Camra, Now works fine
Discusse Here:
Backhoe-Loader-2nd-Creation
F1/2 - Front Bucket Arms
F3/4 - Tilt Bucket
F5/6 - Rear Boom Turn
F7/8 - Main Read Boom
F9/10 - Secondary Rear Book
F11/12 - Rear Bucket Tilt
CTRL + F
1/2 - Right Outrigger
3/4 - Left Outrigger
Anyways please enjoy
Credits:
Ravidnas1 (me) |
| |
|
|
|
10 Comments, add comments here.
|
|
|
Case-IH Magnum 8950 Standard Edition - Prototype, Skeleton, *Deluxe Package - Version 0.82
!! Highly recommended you update to latest version if you have an earlier one! !!
Changes -- 0.75 -> 0.82:
-Fixed the cabin camera not being orientated properly
-Changed front wheel nodes' rays from 20 to 16 to prevent possible problems
-Added forwardcommands; ability to use a trailer's special controls are now available
-Made front wheels harder to bend out of shape during hard cornering
-Removed 2nd set of shocks from front wheels
-Made the wheels slightly bigger
-Minor revisions...
**DELUXE PACKAGE CONTENTS**
-Case-IH .truck file and -mini avatar for ingame preview
-my 'Spectre' rims if you so choose to install, as directed by the readme
-real Case-IH Magnum 8920 pic
**TO INSTALL**
Unzip this package and view the "CaseIH8950 Readme" for installations instructions
Also, for special controls, see the readme (hitch controls, trailer controls)
**CREDITS**
-Conception, Frame, Wheels, Engine-Tranny, and more by DSwan aka TruckMax
-Front wheel steering hydros, wheel & frame strengthening by Polo
Lastly, please remember to rate this after downloading and experiencing! |
| |
| Tags: | Tractors |
Downloads today: 0, all time: 895 |
|
|
No Comments yet. Add some here.
|
|
|
I'd like to present my brand new mcdRoadRoller. The truck name tell you what it is. It is full of meshes so looks quite good (i think :-) )
There's some nice thing. When you're using inside truck camera - your ingame eyes turn while steering right or left! I don't know if you understand me due to my pour english, but just look on the screen (when you steer left, your eyes go to the left also).
What you should know:
It has four gears:
1 TH - LOW WORKING SPEED (<7 KM/H)
2 ND - WORKING SPEED (<15 KM/H)
3 RD - ROAD SPEED (<25 KM/H)
4 TH - CAUTION!!! (<70 KM/H) (FOR FUN :-) )
UNPACK TO TRUCKS FOLDER! I don't know why, but when the truck is placed in packs folder - some meshes behavie weird!
You can use 1-3 gears to start up (no need to start from 1st). I suggest using manual gearshift. To drive more comfortable use gamepad or joystick (due to used this kind of steering hydro system)
Discuss here: http://forum.rigsofrods.com/index.ph...17.0;topicseen
IMPORTANT!: PLEASE DOWNLOAD new truck file from first post of my forum thread (link above) or download mcd rollerdrum trailer (there is new truck file also)
|
| |
| Average Rating: | | Tags: | Tractors |
Downloads today: 0, all time: 30503 |
|
|
One Comment, add comments here.
|
|
|
Tractor, can attach a crane which will be uploaded later.
installation: unpack into your data/ directory.
- zip repacked by thomas, reordered files, added preview picture, renamed material and texture filenames to be lowercase only |
| |
| Tags: | Tractors |
Downloads today: 0, all time: 7080 |
|
|
No Comments yet. Add some here.
|
|
|
RoR first large scale tractor, featuring a full cab, 3 point hitch, amongst other things. This is still an early release and further versions will be made available in the near future. I would like to give lots of thanks and credit to Trever from the forum who created the submeshs and the semi trailer attachment thing (included in the pack). Other thanks to bonehead and Thomas; amongst giving credits to whoever created the original model in Google sketchup.
Discuss or comment here |
| |
| Tags: | Tractors |
Downloads today: 0, all time: 16765 |
|
|
|
No Comments yet. Add some here.
|
|
|
Massey-Ferguson 8400 'Special Edition' (version 1, revision 1):
*Please update to Rev 1!*
Credits: MF original (called "Adam-Tractor") published by "adamoninternet", submeshes by "Trever", thanks to everyone else that help shape it. I modified it heavily such to call it S.E., changes as noted:
-New gearing, more torque, more base and cargo mass
-Longer rear hook
-Bigger front and back tires
-Custom rims (if you use my ttwinturbowheelface rims)
-Fixed smoke so it comes out of correct location (used to come out of corner of cab instead of exhaust pipe)
-Strengthening in certain areas
**Changes for revision 1:
-Decreased torque by 1000 to help decrease stupid-high top speed
-Removed last ~7 gears to decrease top speed greatly, increased diff ratio slightly for better turning
-added "fileinfo" line to MasseyFerg_SE.Truck file -> includes uniqueid, categoryid, and fileversioninfo (now 2)
-download is now a .zip file instead of .7z |
| |
| Tags: | Tractors |
Downloads today: 0, all time: 5936 |
|
|
No Comments yet. Add some here.
|
|
|
This is 3 versions of a 1066 International. I know there not perfect I built thess tractors a while ago and got tired of messing with them and stopped. Its my frist vehicle COMPLETELY built by me. So dont edit and take credit for whole thing. Anyone is welcome to edit just ask before releasing. One known problem is that the camera shakes while driving. Built with Sketchup |
| |
| Tags: | Tractors |
Downloads today: 0, all time: 10792 |
|
|
No Comments yet. Add some here.
|
|
|
This is the Zetor from ZTS
I have only change The gearbox to 40km/h
and now the tractor have 2WD
you must put the .zip file into your trucksfolder
(the orginal Zetor from ZTS is include)
sry for my bad english |
| |
| Tags: | Tractors |
Downloads today: 0, all time: 10619 |
|
|
No Comments yet. Add some here.
|
|
|
credit to zts and bene for use of these
a new pack of zetors includes earlier zetor crystals and 2 modfied tractors the zetor crystal ontop is acctully one that i have seen the front axel was cut off and hydrolics added to the backend it was then attached to a slurrytank authough this one still has a Invisabal frontaxel so you can drive to a load spawner span what u wanton the back then drive (not very realistic but it works)
then theres the roadless its got eqal front and rear tyers
enjoy them ill make a crystal skin sometime |
| |
| Tags: | Tractors |
Downloads today: 0, all time: 9095 |
|
|
No Comments yet. Add some here.
|
|
|
This is a modify Zetor 16 245.
It contains a "frontloader" and a "hydraulic power lift"
orginal model by ZTS
modifications by Gega |
| |
| Average Rating: | | Tags: | Tractors |
Downloads today: 0, all time: 25699 |
|
|
One Comment, add comments here.
|
|
|
Case-IH Magnum 8950 Standard Edition - Skeleton, *Deluxe Contents Package* - Version 0.90
!*! Highly recommended you update to latest version if you have an earlier one! !*!
Changes -- 0.82 -> 0.90:
-Whole tractor made slightly longer
-Wheelbase lengthened
-Slight adjustment to engine and tranny
-Frame strengthened
-Front wheels are now harder to bend of of shape
-Refixed cab camera
-Other minor revisions
-See readme for full changelog from previous versions
**WISHLIST (Contributions Needed!!!)**
-BADLY NEEDS SUBMESHES AND A SKIN!
-Axle and Transfer Case "Differential Locks"
-See readme for full wishlist
**DELUXE PACKAGE CONTENTS**
-Case-IH .truck file and -mini avatar for ingame preview
-my 'Spectre' rims if you so choose to install, as directed by the readme
-real Case-IH Magnum 8920 pic
-Massey-Ferguson 8400 package, including some small farm implements
**TO INSTALL**
-Move 'CaseIH8950.truck and all the contents of the 'Massey-Ferg 8400' folder to your RoR data trucks folder.
-This has not been testing by moving the whole .zip package to the RoR packs folder, so this method may not work properly
**CONTROLS**
-F6/F7: extend/retract 3 point hitch hook
-F8/F9: raise/lower 3 point hitch hook
**CREDITS**
-Project Director: DSwan
-Conception, Frame, Wheels, Engine-Tranny, and more by DSwan aka TruckMax
-Front wheel steering hydros, wheel & frame strengthening by Polo
Discuss this project here: http://forum.rigsofrods.com/index.ph....msg107683#new
Lastly, please remember to rate this after downloading and experiencing! Thank you for your interest! |
| |
| Tags: | Tractors |
Downloads today: 0, all time: 1781 |
|
|
No Comments yet. Add some here.
|
|
tractor.truck
view details
Gold
Silver
Bronze
