This is an 8x8 Offroader based on a MAN-TGA chassis.
It is made for offroading so don't expect it to handle well at high speed.
However, I tried to keep it as highspeed-friendly as possible.
But the main aim is to perform well in rough terrain.
In the readme, there are instructions on how to enable the enclosed wheel meshes.
This vehicle features the "Driving right out of the package" concept.
So put it straight into your data/packs folder and you'll be fine.
Please note that it is my first vehicle and I''m still learning
A Dutch skin for the Mercedes Atego Metz aerial firetruck.
It's a skin based on the Mercedes Atego from the fire department of Middelburg, Zeeland in the Netherlands.
I have tried to make it as real as possible, but because this firetruck is an older Mercedes Atego version than the one in use by the firedept. I could not exactly reskin all parts correctly.
I hope you like it!!
Pedro (Atego Chassis)
firepics (Firetruck body etc.)
Lenni (Nodes/Beams)
Ruben (Dutch skin)
Install: Just overwrite the files in this .zip with the .zip of the Mercedes Atego aerial firetruck
Starling 911, this is Starling Engine 1 responding. Yes ladies and gentlemen, I this is my first upload, and I have made a skin for the KME Preditor by Cydvx and Pascal. With Cydvx's permission I am releasing it. Now mind you this is a Standalone skin, Instructions are in the zipfile. they should help you.
Credit: Cydvx and Pascal for the original KME and Blank skin
Milan42 (me) for the Starling Engine 1 skin. Hope you like it.
UPDATE: I've been working on a variation of my own and it's complete, or close enough. It is fully submeshed and will contact with other vehicles(that must to be contactable). It's sides and tail can fold down. The rear rollcage can be lifted using Ctrl+F4/Ctrl+F6. It has ties in the back so you can drive an vehicle into it. Unfortunately all the stuff I added makes it too "tippy" to carry a vehicle into water anymore but driving on land is fine. Also has a trailer hitch that can be completely folded away if you're not going to use it. All controls are listed in-game. Have fun.
This is an Tatra 813 pack I modified from Pricordes original versions and added "Wheels2" to all of the models so you can inflate/deflate the tires. Also updated to work properly in the latest RoRs release as it was having texture issues before. Use [ to deflate and ] to inflate the tires. This is not as easy on your system as the originals were. They were only about 1300 beams before, now each has over 2800 to properly simulate the wheels.
NOTE: You will need to enable advanced wheels in the configurator under the "CPU" tab to enable "Wheels2" in versions older than 0.38.33.
Please note the credits for the crane go josh (1239) who made the original.
Here is a skin for the Kenworth T600 and a 2 axle tanker trailer. The skin is based off of fuel delivery trucks for HESS gas stations. I made the skin as close to the actual paint job as possible.
Credits:
Kenworth T600 - HemiBoy95 & Box5Diesel
Tanker Trailer - Trevor
Inspiration - My father
Skins - Venem (me)
Included in the pack are 13 versions, 3 Stock Carts, 3 Offroad Carts, 3 Racing Carts,1 Driving Range Cart, 1 Supra Cart, 1 Hummer HX Cart, and 1 Apocalyptic themed golf cart.
All carts are fully meshed, collidable, have fully functioning interiors with gauges and steering wheels, adjustable hitches, and 4 interior cameras plus some other things I may have forgotten to mention.
All components of these carts are done completely by me.
Different carts can be selected upon spawning via the selection system (drop down on bottom of spawn menu).
Compatibility:
0.35 unconfirmed
0.36 does not work(confirmed by mywolfman)
0.37 works (confirmed by me)
0.38 works (confirmed by me)
0.39 works (confirmed by PsychoDog)
0.40 does not work (confirmed by Mythbuster)
Features:
-Real weight, real power, real scale. (so don't expect to tow the ror trailers that way a kabillion lbs.)
-Lockers (press W)
-Operational dump bed, & tailgate
-Contactable bed to load vehicles or objects with ties (press O to tie down load)
-Animated winches on all except cargo version, some even have a rear winch.
-Flexbody everything pretty much
-Specular Shader
-Detailed Animated Interior with shifter.
-custom deuce sounds, with added turbo
Known issues:
-Shader shows up black sometimes, restart ROR until it appears normal, or download boring material below and drop in deuce zip.
-5th wheel version breaks when hooking to some trailers
-No flexbody tires (would be way to cpu heavy, it already is)
The Track Network:
-Fully controllable Points (f3/f4)
-Bridges
-Straights
-Left & Right Curves
-Stations
-Goods Loading Ramp
-Collision Meshes
-Custom Non-overwriting N Helens Map
Installation:
-Simply place the .zip in your: My DocumentsRigs of Rodsterrains
-Does Not Overwrite
-Unique N helens map
Credits:
-Custom Sounds from the Free Sound Project
-Original N Helens Map by Pricorde etc.
-Everything else built from scratch by me, Al T.
-Thanks to the beta testers, coco for help with the engine and everyone on IRC for help or suggestions.
Usage:
-Take corners no faster than around 40mph.
-Doors controlled by f1/f2
-Points controlled by f3/f4 from the trains (must be very close)
-Directional Lighting controlled by (,) and (.) or the indicators.
-The trains are allready on the track.
*Do not release a mod of this without my permission*
Welcome to my Dieselpunk road train pack. This first version contains a selection of passenger trailer consists and matching locomotives. I hope to eventually add some freight equipment as well.
The rear view camera can be zoomed in and out by pressing ctrl+1. Adjust the height of the trailer drawbars with F1 and F2. Always set your transmission to full auto. The trailers can be entered and have a Ringfeder coupling at the rear for daisy chaining (careful, the brakes on subsequent trailers will not work).
Locomotives
A-unit
12x12x12 highway locomotive for passenger duty. 16-cylinder turbosupercharged diesel engine, diesel-electric transmission. Traction motors and steering on all axles.
Length 48 ft, weight 120,000 lbs. Maximum service speed 100 MPH.
AB Double
12x12x12x2 highway locomotive for passenger duty, with 1 booster. 16-cylinder turbosupercharged diesel engines, diesel-electric transmissions. Traction motors and steering on all axles.
Length 95 ft, weight 240,000 lbs. Maximum service speed 100 MPH.
ABB Triple
12x12x12x3 highway locomotive for passenger duty, with 2 boosters. 16-cylinder turbosupercharged diesel engines, diesel-electric transmissions. Traction motors and steering on all axles.
Length 142 ft, weight 360,000 lbs. Maximum service speed 100 MPH.
Trailers
Junior Zephyr
Relax in airplane-style seats with generous legroom in coaches 1 and 2, enjoy the view from the rear observation lounge, or get some refreshments or a light meal in the bar.
3 cars. Length 212 ft, weight 160,000 lbs. Maximum service speed 125 MPH.
Modesty Zephyr
Choose between airplane-style seating in coaches 1 and 2 or table groups in coaches 3 and 4, enjoy the view from the rear observation lounge, or have a drink or light meal in the bar.
5 cars. Length 336 ft, weight 240,000 lbs. Maximum service speed 125 MPH.
Ambition Zephyr
Choose between airplane-style seating in coaches 1 and 2 or table groups in coaches 3 and 4, marvel at the view from the rear observation lounge, visit the bar for drinks and snacks, or enjoy a delicious 3-course meal in the dining car.
7 cars. Length 461 ft, weight 320,000 lbs. Maximum service speed 125 MPH.
Frontier Zephyr
The choice is yours between single or 2-abreast airplane-style seats in coaches 1 and 2, 1+1 and 2+2 table groups in coaches 3 and 4, or 3+3 compartments in coaches 5 and 6 - legroom is generous throughout. Watch the latest newsreels in the theatre, visit the library for a vast selection of national and international newspapers, magazines, and books, and arrange meetings or send telegrams on the move in the conference room. The rear lounge offers a spectacular view of the landscape through panoramic windows, and the adjacent bar offers all manner of drinks, snacks, and even light meals. For a truly gourmet experience, the world-class kitchen on wheels offers exquisite 3-course meals in the dining car.
10 cars. Length 648 ft, weight 440,000 lbs. Maximum service speed 125 MPH.
Notes
Made for version 0.38.67. Other versions are generally untested and may or may not work.
The wheels may oscillate when stationary because they are optimised for low rolling resistance. Exercise caution when stopping or parking as they may creep.
The long consists are extremely fps-hostile. Do not expect playable framerates with the longest combination unless your CPU is very powerful and has a very large cache.
These vehicles are not designed to deform realistically in a crash.
Except for the front and rear, collision meshes are disabled for performance reasons.
Licence
With the exception of the sound provided by BigBoy, all assets used are available for modding with no further permission needed. See the readme for specific file information and licensing details. Edit: the readme included in the .zip file misattributes some files. A corrected readme is attached separately in the showroom thread.
thanks to grayson k 95 for the help and thanks to him for letting me skin it this is the ce300 mod orig by grayson it has baldwin havens and original files only i will update it tomorrow or whenever with more skins all credit goes to graysonk95 and 1 % goes to me skinning
UPDATE
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
UPDATE2
fixed the spelling mistake on the ropables so they all work now
UPDATE 3
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
This is an essentially imaginary truck made from scratch. I've tried to base it loosely on trucks from the 1930's and 40's but its unique. It has meshwheels, a contactable bed and i've tried to give it as close to real handling as i could. Yes its huge but my sketchup ogre exporter stopped working so i cant resize it.
Credits go to: Fordfan for the chassis and me for the mesh and chassis tweaks.
To Modders:
If you ask permission, I'm fine with it. What I don't need is numerous, random mods made of my content without me being aware of their existence.
Important:
The steering looks like it breaks. It doesn't. That is how it was designed.
It is 10MB because of massive jpg files for textures.
Hello! This is my second vehicle release. It is another GTA Ammunation vehicle.
Did you not like the slowness and large amount of weight of the GTA Ammunation Truck?
Then you need the GTA Ammunation Astro!
This vehicle is not in GTA, it's just a custom.
It goes over 140 mph so I don't know the speed, but its fast.
Hydraulics:
F1 Front Down
F2 Front Up
F3 Rear Down
F4 Rear Up
Thanks to Jakebewar for the Hydraulics!
Thanks to Bonehead for the Astro!
The wheels and texture made by me.
HAVE FUN!
Melroe M-880 Prime Mover
This is a prime mover for real heavy loads build out of a former wheeled skid-steer dozer. Like the real thing it does not have any suspension but a lot of power ;-) .
My RoR model features some animated parts like the cooling fans and levers inside the cab as well as some custom sounds.
Mesh and N/B all by me, please do not upload any mods without my permission, thanks :-) .
This is an skin for Lenni's Man TGS 32.350 LTF 1060 Crane Truck.
I've skinned it to an "Feuerwehr Kran" With the marking 'KW-065'
This is an fictional skin loosely based off real german fire apparatus.
Beacons flash Blue now!
Uploaded with permission from Lenni and FF Neustadt (For the beacons and horn)
Credits:
Blue beacons and horn: FF Neustadt
Truck and Crane: Lenni and Craneman
Skin, adding blue beacons and horn: Maurice825
Have fun with it!
And please DO share your opinions! I'll try to make the skin better then.
NOTE:
Skin was also updated, forgot to include the AO.
Installing it:
Open the ZIP with WIN-ZIP or WINRAR.
Copy the 'put in original zip' files into your original TLF zip.
man_tga.zip
view details
Gold
Silver
Bronze
