here is a set of 2006 Lamar tandem axle trailers me and Crazyjoe made the first one has a ramp for loading cars and tractors and such the secound one has no ramp and is for huling loads like hay bails logs craits or whatever you have that requires a trailer with ought a ramp please place in packs and enjoy. WARNING This trailer is not to be modded withought permission from myself and Crazyjoe.
commands:
ctrl+F1/F2 to lift the landing gear up and down
ctrl+F3/f4 to let the rear gate down
O to activate ties once load is on trailer
Credits:
Jerald9000: node and beam chassis
Crazyjoe: all meshes and mesh wheels
Bjytech: flairs
Donoteat: wheelbands
Big thanks to all beta testors
Dieselmaster
EdTheNerd
MadMike
Sushi
Bjytech
Clown
This my Goldhofer STNL3-Platform trailer "Speedy".
"Speedy" is a very flexible and light platform trailer.
Commands:
CTRL+ALT+F1/+F2: lower/raise trailer legs
CTRL+ALT+F3/+F4: lock/unlock steering (lock for reverse driving or extending trailer/steering is locked when trailer spawnes)
CTRL+ALT+F5/+F6: extend trailer
CTRL+ALT+F7/+F8: raise/lower liftaxle
CTRL+ALT+F9/+F10: raise/lower trailer ramps
Note: All commads exept ramps are one-press-commands.
Hope you like it :-)
Here's a trailer I made awhile back with a detaching Neck. It can haul some big stuff, has a flexbody deck that bends flat with a heavy load and flexes over bumps. Its not all that finished, but its as finished as its gonna get, lol. I made a video to show how to use it
Ctrl F1 to raise the neck so you can back under and lock on
Ctrl F2 seats the neck on the hitch after you locked on
Ctrl F3 attaches neck to the trailer
Ctrl F4 detaches neck so you can drive it out of the way to load/unload
Hi,
here is my second upload on the repo:
A 300 ton Heavy Haul LowBoy trailer.
I made the 3d-model some time ago, now I put it into RoR with some overwork.
You can change the color by editing the "300tlb_color.jpg" and the color of the wheels by editing the "300tlb_wheelcolor.jpg".
It has only five invisible wheels, this means it works very smooth even on lower systems (and that is actually the reason why I "cheated" ;-) ).
Use F3/F4 for the (invisible) trailer legs under the first part.
With F1/F2 you can rotate the steering dolly to the left and right. As far as I know this is done via hydraulic in real life. In fact it is just like a semi, but not propulsed.
It is loaded with a big tube.
Have fun driving it (and don't forget to look after the steering dolly ;-) ).
Well after a long wait I decided to release instead of waiting to release.
It has six ties between the stops. becareful with the front hook it can break.
F1-F2 raise lower hook (Hook is also a contact so raise it before backing)
F3-F4 open control panel on the side.
F5-F6 raise lower axles
F7-F8 raise lower axles
F9-F10 raise lower axles
F11-F12 raise lower back ramp.
This has no dolly trailer this time. It is hard on the framerate too.
Next version will probably use hookgroups to make more solid.
Max capacity is 25 tons. I will also try to reduce axles next time.
Here is a 2003 53 foot Great Dane dryvan that I made with Crazyjoe it has opening doors and a contactable inside so you can load crates cars or whatever you pleas into it. The sides of the trailer and the doors are sinkable if you have any questions see the forum link below. Trailer body is fully mesh and has moving mudflaps too.
This is a Cincinnati Bengals skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder.
This is a Detroit Lions skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder
this height adjustable car trailer, is designed and built for easy loading of low ground clearance vehicles and loads.
the bed is 2m (6'56) wide and 5m (16'40) long.
load capacities unknown.
it has 4 ties 2 at the front and 2 near the wheels, press o to lock the load.
it has an invisible foot near the front to make attaching to a vehicle easier ctrl+f3/f4.
the bed lift hydrolics are run via ctrl+f1/f2.
the mesh's and textures that are produced by me are distributed open for use to all with credit to author.
This is a twamco 40 ft tilt deck trailer me and Crazyjoe made it includes custom mesh wheels and mesh body, as far as i have tested it will hold from small vehicles like the bobcat cars and trucks, and all the way up to heavy machinery like the zetor tractors the 450 dozer and the v2 excavator also the MC roler. Goes best behind dump trucks and medium duty trucks like the 1st gen or dodge rams by box5. Please enjoy our trailer to full exstent. WARNING mods to this trailer amy not be released with-ought permission, see me on the forum for details. Their also may be breaking beams on startup just ignore this problem.
Trailer with an ampliroll hook, modified from the Volvo.
Removed the cab and the 2 front axles, and made a regular tow bar. Color is matching the Zetor Traktor.
You have to enter the trailer like a truck to connect the hook to the load, the wheels are still driven so you can move it forward and backward.
It has importcommand so it "listens" to the towing vehicle as well (if that has forwardcommands)
ctrl-F1/F2 for the legs
ctrl-F3/F4 for the tow bar height
ctrl-F5/F6 for the arm with hook
ctrl-F7/F8 for the dumping arm
ctrl-F9/F10 to tighten the ties (they sometimes only grab, but don't tighten)
This is my Huge Enclosed trailer. It can fit the liebber, that should tell how big it is. It's also only 34 nodes, so Fps are great with it. You have to really try to roll it over, so it has a great center of gravity. Has working flares, ties, feet, and ramp, so u can drive pretty much any vehicle in and strap it down.
Included in this pack are:
1)Gooseneck Enclosed Trailer
2)Bumper Pull Enclosed Trailer
Ackermann Moving Trailers
Here are my moving trailers for both the Buessing and the Mercedes Moving Vans.
They have managed materials and material-flares, and are useing sections.
They're not loadable... just some nice trailers to pull around.
this is a tandem axle fully enclosed trailer,
its optimized to carry about 3.5t.
commands are
ctrl+f1/f2 trailer jack up/down.
ctrl+f3/f4 fold trailer jack back/forth.
ctrl+f5/f6 open rear tail gate.
This is the Mercedes Benz Actros 8x8 pack.
This package includes 8 versions:
- version with no upper part
- ampliroll
- cartransporter (+trailer)
- dumper
- log truck (+trailer NEW!)
- box-truck(+trailer NEW!)
- flatbed (+trailer NEW!)
- trail-truck
New versions of the dump trailers because of problems with the original one.
Long dumper (3 axle), long dumper with dolly (4 axle), short dumper (2 axle), and short dumper with dolly (4 axle).
They all have lights now.
F1/F2 for the legs on the long and short dumpers.
F3/F4 to raise/lower the bed on the long and short dumpers.
F5/F6 to raise/lower the bed on the trailers with dolly.
F7/F8 to increase or decrease the distance between the trailer. (so you can move them further apart, back up at an angle, pretend to empty the first dumper without disconnecting them)
They are set up as normal trucks, so their engines must run for the commands to work. I tried it with the turboprop thingy from the original version but RoR kept crashing untill I removed them. :-(
The trailers with dolly also have a hook in the back, so you can chain them together if you want.
Also included is a new frameless dumper. It is based on the old one, but it has a new a-arm, new legs, new dump bed, lights and mapped to the same texture as the others.
This is a complete overhaul of the older arrow board trailer I made all those years ago. It's been completely rebuilt from scratch. It consists of a basic frame, and a basic mesh, so it should be pretty easy on your computer.
Note: While the board and legs may be raised and lowered from the tow vehicle (if it has the forwardcommands tag), you'll have to manually enter the trailer to activate and deactivate the lights.
2006_Lamar_Trailers.zip
view details
Gold
Silver
Bronze
