Project TATRA 815 CKD AD-28 is finally COMPLETE.
You can download it and have fun with this crane.
COMMAND for use:
F1 - F2 : rotation crane tower
F3 - F4 : lift arm
F5 - F6 : disengagement arm
F7 - F8 : spooling hook
ctrl + F1 - ctrl + F4 : disengagement/clutch shelf
ctrl + F5 - ctrl + F12 : dusebgagement/clutch shelf (up/down)
Before you start drive you must locked hook nose oof cabin, because it will cradle. For locked use button "L" and locked arm button "O".
Mesh of the uppercabin is made by Craneman
Other mesh parts are made by me
N/B axles are made by Craneman
what you get is:
Terex-Demag ac500 with ssl
Terex-Demag ac500 without ssl
Terex-Demag ac500 with 18m fixed jib
Terex-Demag ac500 with 30m fixed jib
Terex-Demag ac500 with 36m luffing jib
Terex-Demag ac500 with 60m luffing jib
Terex-Demag ac500 with 90m luffing jib
f1 or f2 = turn left or right
f3 or f4 = boom up/down
f5 or f6 = hook up/down
f7 or f8 = cab up/down
f9 or f10=counterweight systeem up/down press K too see it
f11 or f12=jib up/down
ctrl+f1 or ctrl+f2=boom1 in/out
ctrl+f3 or ctrl+f4=boom2 in/out
ctrl+f5 or ctrl+f6=boom3 in/out
ctrl+f7 or ctrl+f8=boom4 in/out
alt+f1 or alt+f2 = suspension up/down
alt+f5 or alt+f6 = outriggers turn
alt+f7 or alt+f8 = outriggers in/out
alt+f9 or alt+f10 = outriggers up/down
alt+f11 or alt+f12=cab turn
ctrl+alt+f1 or ctrl+alt+f2 = axle 5 lift
ctrl+alt+f3 or ctrl+alt+f4 = ssl up/down
ctrl+alt+f5 or ctrl+alt+f6 = ssl sidemoving
ctrl+alt+f7 or ctrl+alt+f8 = ssl ropes ssl till boomhead
ctrl+alt+f9 or ctrl+alt+f10 =couterweight boom up down only by versions needed with luffing jib
ctrl+alt+f11 or ctl+alt+f12=crab steer
i hope i have write all commands
look at the first post of ac500 topic for pictures how the counterweight systeem work (demag-ac500)
This is my version of the a tatra flatbed. It has a crane on the back of it. The crane is not that big and strong so be careful. Yes this is my first crane. And my first big leap to becoming a
truck bulider. So I hope you like it!
CAUTION! Make sure you take the tatra flatbed out of your pack folder otherwise it will NOT work.
new and improved. this isoloader has been modded to suit the much anticipated release of the train!! now not only could you load trucks with containers, logs and other large item's but with this isoloader and the release of the train mod (hopefully not that long away, fingers crossed), you could build a empire and make, make Believe a reality. i know I'm tired of fake heavy loads what a boring box..... now there is light at the end of the tunnel, can you feel the vibrations.
delete the old isoloader.zip file before running game to stop crash's.
-front legs cylinders are stronger
-front tires are stronger
-visuale bugs of hinge points fixed
-change what of color
-legs visual better
-added jib version
hook A pallet press ALT-f12 ,unhook the pallet press ALT-f11
For the first start the hook is on ,so you have nothing to do.
You can pickup the palletlifter with press h (this crane has an hook-node in the hook) or O just for other cranes.
Drive the truck under the box ,it will automatic hook the box .
Press CTR+ALT f1 for legs in .
For unhook the box press ALT+L
alt+ f1/f2 legs left in/out
alt+ f3/f4 legs right in/out (use right alt ,left the game will close)
alt+ f5/f6 legs left in/down
alt+ f7/f8 legs right up/down
alt+ f9/10 leg front up/down
ctr+alt f1/f2 legs loadingbox up/down
ctr+ f1/f2 boom1 in/out
ctr+ f3/f4 boom2 in/out
ctr+ f5/f6 boom3 in/out
ctr+ f7/f8 boom4 in/out
ctr+ f9/f10 boom5 in/out
ctr+ f11/f12 boom6/7/8 in/out
f9/f10 jib booms in/out
f11/f12 manual jib booms in/out (works only when the hook is not loaded)
L hook /unhook trailerhook or cranehook
alt+ F11/F12 unhook/hook palletlifter
- Detailed meshes
- Accurate kinematics
- Realistic lifting capacity (refer to the board on the crane!)
Start the engine and put the Crane in NEUTRAL!
- F1/F2: Rotate
- F3/F4: Trolley (use throttle to speed up if needed)
- F5/F6: Hook Up/Down (use throttle to speed up if needed)
- F7/F8: Extend/Retract Jib
- F9/F10: Raised-jib working angle
- Ctrl+F1/F2: Assemble/Disassemble
- Ctrl+F3/F4: Outriggers
- Ctrl+F5/F6: Legs
- Ctrl+F7/F8: Trailer wheel up/down
- Ctrl+F9/F10: Turn trailer wheel
- And as usual lock loads with "o"
You can also see the commands by pressing "T" ingame.
Basical procedure: Ctrl+F4 to fold outriggers; Ctrl+F6 once for legs, Ctrl+1 [NOT F1!] to display the baseplates, Ctrl+F6 again for legs. Then Ctrl+F2 to erect the crane automatically. Jib control is on F7/F8. Jib angle is on F9/F10. Retract automatically on Ctrl+F1.
- sputnik_1: meshes, node and beam, sounds, textures
- BigBoy, Craneman, Lifter, Inviteds, Donators: testing and help, thanks a lot!
This zip contains the truck files and Csxgp38-2's beacon (available on the repo).
1- Make a backup of your Gamer18's original zip file demagac500gamer18UID.zip
2- Take all the files from flares_for_demagac500gamer18.zip and put them into Gamer18's orginial zip file. This will overwrite the original truck files.
Your keybind for headlights and turn signals
Warning lights = CTRL + 1
Worklights on the cab and rotator = CTRL + 2
Gamer18 for the Demag AC500
Csxgp-38-2 for the beacon
well here is the next update. this version dosnt turn to well i modded it to be able to lift and move 130tonne i think it might be more. controls are displayed in the help section.
delete the old version isoloader.truck