New
Added some copyright file to the zip, since someone found it necessary to use my mesh without permission for another game.....
This is the Liebherr LTC 1045-3.1. It's a small compact crane which can lift 45t at close range.
The crane is fully skinable and you can download the PDN files here You are allowed to release new skins onto the repo but please make it a .skinzip!
Be sure you got an up to date RoR version
Credits:
- Lenni for mapping the whole crane and his tons of work on finishing this project!(Mirrors, flares and N/B fixes!)
- AIN_002 for editing meshes and bug fixes on the N/B
Controlls:
You can also find the controls by the T-screen. (just press T in-game)
DON'T MODE WITHOUT PERMISSION !
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Small update:
suspension tune
Added flextyres ( Thx to Lifter for approve use mesh file)
added 3 more colors with own mirrors material ( get work mirrors in mp if each takes a different color)
v1.2, see changelog
Here is a 1st Generation Bluebird Vision for under your tree! (or in your mods directory...)
Info:
The 1st Generation Vision was a type C bus made by BlueBird from 2003 – 2007.
Features:
-Animated props (including openable e-door and roof hatches)
-Changeable seat and floor color textures*
-ABS, slopebrake
-District name on the side of the bus
-Selectable 8-way types (dropdown in the spawn menu)
Gripes:
-The body appears shaky on the inside at high speeds (since it's not a flexbody it shakes rather than flexes)
Changelog:
-Fixed the left veer
-Added reflection in driver mirror
This should be the final final version!
*You can download different seat/floor textures here: Brown Black Green Red Blue Here is the PSD for the district name, making editing it with the same font easy.
Credits:
Brickman & Dereksh97: Original free-to-use-with-credit bus n/b
SBF- critiquing and suggestions
Khadner- CAT C7 sounds
ROR-EMS- CM300 Radio mesh
Carsonj493- BlueBird Vision 3D model
graysonk95- Making the bus!
PM me with any questions or comments. No mods, however, you may distribute customized textures, no permission needed.
Enjoy!
This pack is my attempt to capture the Streamline Moderne style popular in the 1930s and 1940s. The vehicles are all fictional, but their performance is realistic. I hope you'll enjoy driving them as much as I have enjoyed making them.
1948 Martin T64S "Custom" Tractor
A very low-slung 6x4 tractor. It has independent front suspension with double wishbones and load sharing rear suspension. The engine is a naturally aspirated 12-cylinder diesel driving through a 7-speed gearbox and locking differentials. Overall length is 29 ft, wheelbase 22 ft from front axle to centre of rear axle group, width 102 in, height 14 ft 9 in to tip of smokestacks. Kerb weight is 20,000 lbs, gross combination weight 80,000 lbs.
Fully loaded, the T64S will reach a top speed of 60 MPH with one of the included trailers. It will accelerate from 0-50 MPH in 1 minute, 0-60 MPH taking approximately 2 minutes.
1948 Martin O40 Tanker
A streamlined tank trailer in fictional "Hexaco" livery. Steel unibody, load sharing suspension. Overall length is 40 ft, wheelbase 28 ft from kingpin to axle group centre, width 102 in, height 10 ft 6 in. Loaded weight is 60,000 lbs.
1948 Martin F45 Flatbed
A simple flatbed trailer with stainless steel load deck and load sharing suspension. The deck is submeshed with the rollon flag and has ties to secure loads. Overall length is 45 ft, wheelbase 36 ft from kingpin to axle group centre, width 102 in, deck height 59 in, overall height 79 in to top of bulkhead. Kerb weight is 12,500 lbs, rated load 47,500 lbs.
1948 Martin V59 "Streamliner" Dry Van
A very large and somewhat impractical dry van. It has a streamlined stainless steel unibody and load sharing suspension. Overall length is 59 ft, wheelbase 47 ft from kingpin to axle group centre, width 102 in, height 14 ft 9 in. Loaded weight is 60,000 lbs.
Notes
These have only been tested in Rigs of Rods version 0.38.67.
The wheels have 40 nodes each, and the meshes were made in Sketchup. Don't expect these to be FPS-friendly.
The trailers are roll coupled via the system used by Lenni and Badboy for trailer steering. The centre of gravity and suspension are tuned accordingly; the trailers may topple easily on trucks that lack these nodes.
To minimise rolling resistance, the wheels are pushing the limits of the beam engine. They tend to oscillate when stationary. Caution is advised when stopping or parking on slopes as they may creep.
The trailers have very low drag. The T64S will not pull most other trailers at high speed.
Licence
CGTextures does not allow redistribution of its textures under open source licences. You must remove/replace their texture before releasing modifications of this truck. All other assets used are available for modding. See the readme for specific file information and licensing details.
Do not edit the MESH in any way shape or form without my permission. If you want to use
the n/b all I ask is that you PLEASE consult with me first. Public or private. You are free
to make custom colors, change the motor, wheels, etc. But do not edit the verts on anything
here in this zip.
Credits:
darn_it: Main 440 engine and U-joints
eclipse/faustknight: Rear Dana 60
Tenderpaws: Transmission
ADR's Carmageddon 2 cars: Some textures
Mythbuster: Support, a lot of testing, and being there for rebounding ideas.
Jaw-4: Testing, support, and being someone to talk to.
PRT-Audiman: Sound and tuning help
Skyhawk: Mini's
Jaimswallace: Awesome teaser video
Dkutch: Everything else.
Also, you can do whatever you want with it, take parts, repaint, change rims, I don't care, just give credits if you are going to release something using these parts.
These are two of my favorite trucks, 1975 Chevrolet Titan 90 and GMC Astro 95.
The Astro 95 and the Titan 90 both have a Detroit 8v-71 318.
updated again with Sounds, The Titan is now longer in the GN Empire Builder Scheme
She's painted like my Titan model. Big Sky Blue and White with Black and gold stripes.
Now Without Visor, And Detroit 318 Straight pipe Sound Added.
Credits
Model - dneufeld
Wheels - Hemiboy
Adding the wheels - DougFunnie
Skins and tuning - MADDRIX
Sounds - MADDRIX - NRS91
I present to you, the 1915 Ford Model T. This holds the name of the oldest real car ever to be put into RoR. This is the Original "Go everywhere, anywhere" car.
There are 6 versions. There is a Pickup truck (2WD and 4WD), a Sedan, a Coupe, a Touring, and a Junker version.
The gear ratios/axle ratios/wheel size/engine power/top speed are all real specifications. The top speed is a physically limited 40 MPH on the dot for all versions except the power-degraded Junker. The Junker's top speed is closer to 30. All versions except the Junker have 21 Horsepower. Junker has around 18.
You cannot drive this car in Automatic Transmission mode, as the gap between 2nd and 3rd, then 3rd and 4th are too large for the game to gearshift between them correctly. Thus, you must drive in Manual or Fully Sequential gearbox mode to get up to cruising speed.
These vehicles are not flexbody, and each on average have between 10K and 20K polys total including all 4 wheels. Honk the horn for a sound only '10s - '30s Fords can produce. Aoooga! Sometimes when you turn, it heavily understeers because the front axle is not very strong, so be careful.
Custom sounds are thanks to DODGE charger (thank you!)
All meshes and N/Bs are thanks to myself, Sirendude2011.
Do not mod this vehicle. Treat this like you would a real Model T 100 years of age. Would you (attempt) to hellaflush a Model T? No, so don't do it. Same goes for hydraulics and lifts with mud tires. It is impossible to skin it with anything except solid colors (no designs), so don't try.
Enjoy this historic vehicle! The driving experience is like no other vehicle in RoR history, believe me.
This is a 1976 Ford W-9000 cab-over-engine semi tractor. A fairly basic node-beam vehicle that will get the job done. All of the pieces for this were created by me (M-138) except the mirrors. Feel free to modify, just remember to give credit.
It is meshed, and much higher quality. Credits:
Pricorde - Original bus
Derbymutt - Revival, meshes, re-texturing, n/b fixes and changes, shader stuff
Fradias - Wheels & Tires
Modding Policy:
Modding and releasing any content for this bus on a mod of it or on another vehicle is permitted and encouraged as long as due credit is given.
Basically, Mod away and give credit.
Info:
It is fully skinnable, if you do not like the plastic paneling on the bus, just comment out agora_fb.mesh and agora_rear_lights.mesh from the flexbody section as well as the forset line below them.
It is also deform-able and flexbody.
I have also used flexbodies for the tires, so that they work in multiplayer and still are deform-able and separate from the rim mesh.
THIS HAS BEEN UPDATED:
FIXES:
THE 01 ON THE SIDE
THE RANDOM BLACK LINES.
This is the old General Lee from the Dukes of Hazard. The original Dodge Charger was by bonehead and I gave it a new paint job (skin) and then modded the engine and gearbox to make it more like the original General from the program. Hope you like it.
Credits:
Dodge Charger (.truck file): bonehead (kudos to him)
Skin and Engine: Me (FlyingGuru)
This is the famed AMC Gremlin produced and sold from 1970 to 1978 during the oil crisis. This car was intended to be an economic city car, but it's unreliability and fitting name of having specific requirements to work made it a complete flop and almost tied with the "Fishbowl of the Streets" cousin, the AMC Pacer. This car was modified from the Dodge Police and started as a simple reskin and reshape, but I ended up adding flares and adding and fixing the interior props.
To leave comments, go to this page: AMC-Gremlin
Credits:
Pricorde- chassis and blender submesh
Francis Franco- Reskin and changes.
Hello! This is my second vehicle release. It is another GTA Ammunation vehicle.
Did you not like the slowness and large amount of weight of the GTA Ammunation Truck?
Then you need the GTA Ammunation Astro!
This vehicle is not in GTA, it's just a custom.
It goes over 140 mph so I don't know the speed, but its fast.
Hydraulics:
F1 Front Down
F2 Front Up
F3 Rear Down
F4 Rear Up
Thanks to Jakebewar for the Hydraulics!
Thanks to Bonehead for the Astro!
The wheels and texture made by me.
HAVE FUN!
This is the dumper-version of my Mercedes Kurzhauber. Everything is made by me. Its ropable, so you could also carry it.
Its a bad frameeater, but you can deactivate the mirrors and the mesh-wheels if you ve poor framerates.
Its not already done, but for the moment its some nice stuff i think.
you can connect trailers to the front- and the back-hook
You can lower and lift the supports with F1/F2
You can lower and lift the Dumper with F3/F4
As long as you give me credits, you re allowed do verything you like to and that makes the trucks better.
Using parts of my trucks for your own project surely also allowed, only let the people know who has done the originals.
It was nice to get an PM if you plan to publish it on other sites than these.
Here it is, the newest addition to the school bus selection in RoR. This baby is fully submeshed, flexbody'd, has amazing suspension, super realistic 5 spoke wheels, and a driver with a cap. Made by Jaw-4 and Dkutch. Enjoy!
All American Soap Box Derby Masters division car Authors:
Derbymutt - Everything Changelog:
Beta 1:
+Initial Release
+Meshed
+Arcade version only
Beta 2:
+Updated Body mesh
+Helmet
+Correct size
+Meshwheels
+Improved Handling
+Visible pulley system
+Airfoils
+Body is lower poly
Release 1:
+Reflective body
+Fully animated simulated interior and mechanics
+Realistic axle damage
+Simulation version added
+Ropables
+Colliders
+Submeshed
+Skinnier wheels
+Handling fixes
+Wheels now in correct positions on axles Background:
I am building the car that I finished 6th in the world finials with in 2007. It is not an R/C car, it is a car that you get into and roll down a hill with. The real car does not have an engine, nor does it have brakes on the wheels. I plan on simulating the real car completely in this project. Discuss:http://www.rigsofrods.com/threads/102435
Craneman-Lenni-LTC-1045-3.1.zip
view details
, please rate and comment
Gold
Silver
Bronze
