This is a chevron skin for the international 4700 & tanker trailer by trevor. simply replace the original files with the files in the pack and there you go. enjoy!
Volvo FL12 Firetruck with mesh body. Made from the same papertoy as the 1st truck.
This is my first bigger model in a few years, I only made smaller parts in that time
Even though the truck is complete and working, it is considered a beta. The body is prop, but will be a flexbody in a future release. It has a node and beam skeleton for this, and invisible submeshes for collisions. The frame is made from regular nodes and beams.
It has a different unique ID, the other FL12 does not have to be deleted.
Feel free to modity, reskin, improve, convert, distribute, whatever.
There is a big png-texture included in the zip for reskinning. For the body, it is obvious what part goes where (This probably will *not* change). All the smaller squares in between have smaller parts mapped to them. (those probably *will* change)
F1/F2: Front winch
F3/F4: Rear winch
F5/F6: Rear firehose
G: turn firehose on/off
O: lock/unlock winch (they have ties at the end)
L: lock/unlock trailer (regular hooknode)
M: Top beacons
ctrl-1: front and rear flashing lights
ctrl-2: left and right flashing lights
ctrl-3: rear white lights (for working at night)
ctrl-4: left white lights
ctrl-5: right white lights
A pack of flatcars (standart 40ft, bulkhead 40ft and heavy weight 8-axle), all come with different skins.
The couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
Known bugs:
If you enter a flatcar through the vehicle selection menu game will crash if you try to exit the flatcar, simply change into another enterable vehicle via the menu and exit there.
Thanks to:
sputnik_1 for helping me with adjusting the node/beam.
I have worked very hard over the last few months on this backhoe and were still just getting started.
This is only a beta, So dont exspect the best, And its not done yet so dont rate 1 star saying its not done, i know....
You need to delet the old one for this one to work!
Update V1.1
Redid front bucket - Larger
Re textured the bucket, Less cat logos, and just better looking.
Fixed wight problem, Now can be operated with no wheelys
Fixed Camra, Now works fine
Karosa Renault Citybus 12M
Model of Karosa Renault Citybus 12M - czech version of Renault Agora S. It was produced between 1996-2001 by czech manufacturer Karosa as cooperation of Karosa and Renault. It was one of the first low floor buses in Prague
Authors:
-Pricorde (chassis, skin)
-Agora Citelis (engine sounds)
-masfilip (skin)
Works in RoR 0.37, not tested in older or newer.
Hello, this is Khadner back with a International 9800i wrecker and loader. This is a mod to the Scania Wrecker and Loader by Pricorde. If you would like to release a mod to this specific version you may just please credit me and notify me via the forums if you do. All the commands are the same as the Scania wrecker and this vehicle can be accessed by pressing 'R'. If you have this vehicle out and you press 'R' you will end up in this vehicle unless you spawn another Scania wrecker after this one.
Credits:
-------------------------------
- Pricorde
- Me
2008 KME Predator fire engine, based on the fire engine from Butler NJ.
Features:
- Openable doors and windows
- Tilting cab
- Animated props; driveshafts, light switches, pedals, dashboard needles...
- Can simulate engine torque twisting force (RoR first)
- Comes in 2 versions; caterpillar and detroit, both equiped with allison 5 speed auto transmission
- 22 commands (F1 to Ctrl+F12)
- 9 custom lights (Ctrl+1 to 9)
v1.2
Fixed:
-Default light bar flares showing on the roof when "M" was pressed
-Broken turn signal
-Mirrors are back again
-Meshwheel2
-Added Eminox's engine/gear ratio & driving aids
-Now accept .skinzip files
-Detroit and Caterpillar version are combined into the same .truck file, use the in-game menu to make your choice.
Starling 911, this is Starling Engine 1 responding. Yes ladies and gentlemen, I this is my first upload, and I have made a skin for the KME Preditor by Cydvx and Pascal. With Cydvx's permission I am releasing it. Now mind you this is a Standalone skin, Instructions are in the zipfile. they should help you.
Credit: Cydvx and Pascal for the original KME and Blank skin [read more]
Here it finally is! The Bombardier ALP-45DP dual powered locomotive.
It comes in two different liveries, AMT (Canada) and NJT (USA).
Both a version of the locomotive in diesel and in electric mode is available, only difference are the sounds and the removed exhausts on electric version.
Please carefully read the instructions BEFORE posting useless questions:
Spawning:
Use the train spawner placed on the map (small building where it says "Trains") or place it on a straight track piece via the .terrn file, DO NOT spawn in the truck spawner this will not work.
Controls:
The ALP uses default truck controls. Always stay in automatic-transmission, it will not shift in the second gear!
F5/F6: to rais or lower the pantograph.
CTRL + 1: change directional lighting
CTRL + 2: front ditch lights
CTRL + 3: front lights
CTRL + 4: rear ditch lights
CTRL + 5: rear lights
CTRL + 6: wipers
(Un)Coupling:
The knouckle couplers couples other trains (using the same coupler, of course...) like other ALP's automatically. When coupled, both carriages are connected to each other ingame. If you want to uncouple two carriages, you need to unlock couplers on BOTH carriages in between you want to uncouple. The ALP has a small lever next to the rear knuckle coupler (with a lock/unlock-sign next to it) that can be grabbed by mouse. Pull to "unlock" position on both carriages and done. Not that complicated.
Thanks to:
sputnik_1 - Without him this would not have been possible. He made trains actually work in Rigs of Rods (as you will see after reading this and testing the locomotive), outgoing from donoteats basic layout design. Furthermore he helped a lot with tweaking the ALP, to make it drive as good as it does. Many many thanks mate!
donoteat - He once had the idea to bring trains to RoR and made the great layout we are now using.
And thanks to the inveted members who tested this!
Update:
Added ropables so it can now be lifted with a crane.
Errors:
Game might crash when you want to couple two ALP's, to avoid this disable high quality refelctive effeckts!
After a LONG time working on and off I bring you this:
DAF XF105 8x4 Hauling Truck Original truck by Questnl
You may have seen previous iterations of this truck on this site before, but none as extensive as this.
Here is what I have done: -------------------------------
() Completely redid cab texture, from scratch
() New HD Wheel Texture
() Added Traction Control
() Increased power, & braking
() Added Anti-Lock-Brakes
() Added slope brake
() Using Wheels2, with user controlled tire pressure ingame
() Decreased Weight (more realistic now)
() Sharpened up steering
() Updated suspension
() Updated Help.png
() Updated preview picture
() Fixed translucent metal mesh
() Added Beacons
() Updated ability to raise/lower extra wheels
() Added user controlled lights (see ingame help on your dash)
() Added rear flares:
-Reverse lights
-Blinkers
-Brake lights
ZIL-135 BM-27 Uragan 9P140 launch vehicle and ZIL-135 bare chassis version
UPDATE 2:
- if you downloaded before 2011. december 21. 19:00 GMT (or anytime before this note appearing) please REDOWNLOAD. Otherwise you either won't have the fifth wheel version at all, or the one with bugged wheels. Sorry for the inconvenience.
UPDATE:
- fifth wheel version included. Keep in mind though, that most semi trailers might not fit it because of it's different position compared to normal semi tractors.
- the tires and rims are separate objects now, hence the rims won't flex anymore.
- custom engine sound. Sampled from actual Zil-135 sounds.
- some more skins.
i guess i can say merry x-mas now...
highlights:
- normal mapping
- detailed exterior, flexbody, damage textures
- 8x8 drive with a unique wheel and steering layout
- good off-road capability, and no irrealistic performance
known problems:
- alternate skin selection does not show up the first time you select it, only second time. Must be a RoR caching issue.
- when alternate skin is selected, material flare bindings (lights) do not work. This is confirmed to be a problem with the *.skin system.
This is an American Pride skin I made for the Kenworth T600.
Credits for the truck go to: HemiBoy95
This replaces the first truck, just download skin, go into the T600 folder find and remove the T600body_1.dds and also T600body_1_s.dds and make a copy of them, then just simply place the new skin into the folder and play..Have Fun! (sorry for no picture, this is my first upload, and im trying to figure out how to get a screen shot)
-updated version, rope spreading works now and ballastbox sides don't lock up anymore-
-new update: wheel definition updated and new working mirrors added.
This is a pack with a semi version and a ballastbox version of this truck,
it also contains a jib which can be fitted to both versions.
After a very long time of making this truck it is finally finished,
it features a fully funcional crane,
animated parts like driveshafts and control levers
animated cockpit, lights all around the truck,
custom sounds and a contactable surface on the truck.
Special thanks to Betzi who made the original mesh for the crane
and to Miura who helped with the engine and weight settings,
also to Aperion for the slidenodes patch.
No mods of this without permission by me,
also no use of parts of this truck on other trucks without permission.
Skin mods don't need special permission, but don't upload the whole truck again
but only the edited texture files.
Use with 0.37.126 or higher
*doesn't include the terrain and the pallet,
pallet is in this pack: 30t-mobile-non-slewing-crane
terrain here: 2506
third upload to the repository another skin for my company rormart this skin is for the MAN TGX 26.530 with Palfinger PK 44002 that lenni made to install it you just put the DDS file in to your Lenni-MAN-TGX26530Crane-7a6eUID.zip and you done!
Melroe M-880 Prime Mover
This is a prime mover for real heavy loads build out of a former wheeled skid-steer dozer. Like the real thing it does not have any suspension but a lot of power ;-) .
My RoR model features some animated parts like the cooling fans and levers inside the cab as well as some custom sounds.
Mesh and N/B all by me, please do not upload any mods without my permission, thanks :-) .
This is my mod of my previous mod called (MTVR2). This is a purely off-roader truck, it has 10 wheels and go's just about anywhere. The original version of this truck came with older versions of ROR so anyone who has used ROR for a while should remember it.
whats new:
More fps friendly then last version
locking diff's
reworked all the suspension with "shocks2"
removed "wheels" section and added "wheels2"
added a steerable rear axle
added grip nodes to the tires
truck now floats
can now change the PSI in the tires
This truck is not a looker and isnt meant to be, its meant to be a usable vehicle, it go's anywhere in ROR you want and will in fact climb up vertical walls. This truck is almost indestructible even after being drivin off a cliff usually a collapsed wheel is all that happens. It has so much torque and traction that if you give it full throttle from a dead stop in 6th or 7th gear it will wheelie up and over backwards. You can still tow trailers with it just hook them up to the receiver and lock it down with L.
i edited this truck i spreaded the axles lowered the roof and extended the axle This is an International 9670 I made out of DFO's Peterbilt 362 cabover, 100% standalone. Just drop the files into your trucks folder or put the zip in packs.
Credits are DFO for the original truck, thatsnice for making it all standalone
This brings angyringdahl's International 9670 COE to a 10-speed. Have his permission. requires original truck. to install, dl and change file name to "9670.truck" no quotation marks, and drop in original International 9670 truck zip. Ten speed roadranger. Have fun!
Scania R 420 and R 480 Topline trucks, two different skins included.
Updated, doesn't use sections anymore.
Installation as usual, put the file in mydocuments/RigsofRods/packs.
If you have the older version then please remove it (this doesn't automatically overwrite!)
Works only in 0.36 and above.
All mesh and node and beam parts of the model are made by me, credits to pedro for the steering wheel texture.
If you want to reskin it make sure it doesn't conflict with my original pack in any way and contact me on the forums before you release any derivates of that model.
Only use one version of the truck at a time, more might crash the game.
I am not responsible if you mess up your RoR by installing or using this truck in a wrong way.
Here is the first US rolling stock, so you can finally tow some waggons with my ALP.
A loadable 40ft boxcar, comes in several liveries.
You can open the doors by grabbing the levers at the doors, the couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
Known bugs:
If you enter a boxcar through the vehicle selection menu game will crash if you try to exit the boxcar, simply change into another enterable vehicle via the menu and exit there.
Thanks to:
donoteat, maddrix for skins
sputnik_1 for helping me with adjusting the node/beam.
It can load 1x 40', 45' or 48' are also possible, but that may result in too much front and rear overhang and then the container might hit the tractor unit.
The other possibilities are 2x 20', 1x 20' in the middle or at the end with retracted chassis back.
You can extend and retract the rear end to fit different containers on, and it is possible to adapt the suspension to different heights and loads,
the command keys show up in the ingame preview.
There is also a version with two containers fixed to the trailer for people who don't bother loading or unloading it.
If you want to reskin it please use the GUID system and skinzip files, then you can upload your skins to the repo.
Don't modify anything else or use parts of it on other models without my permission please.
Well heres something I made ages ago. I got bored and wanted to have some fun in ror. So I made a basic baggage train and 2 styles of trailers for it. You can hook up as many as you want and they are designed to be low fps although with like 6 you will get some lag.
Credits:
All made form scratch by me (Al T.)
Do not modify without my permission.
Install: Open Zip and place the 3 zips inside in your ror packs folder.
Please have some fun!
p.s -this was a side project and only took a week, not my usual quality and a bit crappy
i was going threw one of my old drawing books the other day when i came across this truck that i had made up and drew awile ago so i decided to make it for ror!
it has an extendable ramp that comes out the back up to a flat bed
independent rear suspension
emissive
ties so you can lock stuff on to the back
a trailer hitch
cool diamond plate fenders
solid steal undercasing and rear end
also the ramp will be part extended when you start because that was the only way to make the submesh not dissapear when using the ramp just use f2 to bring back up till it becomes part of the back and only extend till it touches the ground if you go to far it will brake the command rods
and the submesh has been fixed on the ramp since these pics and also a trailer hitch was added as shown in last pic and the windows were fixed and ARE seethrough ror was just being kinda glitchy in the last pic thats why they dont look seethrough but they are
later there will be an offroad racing version and a jettruck version aswell
This is The F-150 Raptor SVT from Ford.
Has leaf springs at the rear with some really nice travel. on the front double A arms for each wheel with fair amount of travel.
real fun to cruise. has tow hitch for towing thingies.
Not much of exciting look since it is only N/B chassis but i find those kind of trucks most pleasing.
HAVE FUN.
this is the Mercedes converted into a canadian chevy forces vehicle
if you have the truck looking bad then you in stalled it right(supposed to look a-little bit crushed)
and a big thanks to the original creator for this awesome truck
This is a new version of the Atego-DLK uploaded by Firepics. I made it look like Belgian ladder trucks. I also made a new suit for the fireman. Hope you enjoy! Don't hesitate to comment
Hier is een Belgische versie van Firepics z'n Atego-DLK. Ik heb ook het pak van de brandweerman veranderd. Ik hoop dat je het leuk vindt! Aarzel niet om commentaar daarop te leveren
A Scania ampliroll, based on the default Scania loader by Pricorde. I made this a while back (now added UID and a miniature file).
Works nicely in the latest version(0.38.43). NOT tested with older versions.
Credits:
Pricorde - the default 6x6 Scania Loader
Scania & Pricorde - the skin
Me(Aivar) - ampliroll mod
MANTGX26.540SemiFlameEdition.skinzip
view details
Gold
Silver
Bronze
