Update: download here
- Ramp opens further (so you can drive a small car up the ramp)
- Ties to hold the load in place
- in now imports commands like a trailer. Park near rear bumper and use F9-F12 to control the ramp.
Seen it in the request forum: a container with retractable legs and a modified Ampliroll to transport it.
The truck is a bit longer, removed the hook, added ties and a trailer hitch.
The container imports-commands from the truck: F1/F2 to retract/extend the legs, F3/F4 to lower/raise the container (makes legs shorter/longer)
There is also a 2nd load in the zip-file: a tank in a frame (sort of) Same commands as the trailer, but it can also be picked up by the Ampliroll. F5/F6 to retract/extend the hook
Notes:
- The legs will collapse if you make the containers too heavy.
- Using existing textures from semi, ampliroll, acontainer and aflatbed. Thats why only the help is in the material file.
Volvo Cement Truck.
The truck is build from pictures and some imagination, but I measured a real truck to get the size a bit realistic.
The drum is hanging on only 2 nodes, and it rotates by itself.
It has some custom props: mirrors, exhaust, antenna, truckhorn and those side-guard-thing between the wheels.
Original texture is included, which has sharper edges and is easier to make another color.
Feel free to modify etc., also feel free to use the props but do not forget their textures and material.
Although the cab is based on the cab from Tyranitor, the trucks have only 14 nodes incommen.
The textures I used were listed as Peterbilt 379 on 1 site, and 359 on another. Having looked at lots of pictures during the building, I think it is a 359. (It looks like a 379 has the turn-signals mounted on the front lights)
Exhaust, air-drum, truck-horns and hand-rails are recycled from Tyranitar, but with different (more shiny) material and smoothed to make them look more round.
Hood ornament, fuel tanks and 5th wheel are custom build for this truck.
Feel free to modify, and if you need help with the custom props do not hesitate to ask.
Edit:
Someone asked for a version with longer wheelbase and no sleeper cab. Truck file and preview picture are attached to the first post in the discussion thread.
Box5Diesel's Duece and a half (more like a 5 ton, but who's counting, lol)
This thing is a jack of all trades, crawling, climbing, towing, offroad, transport, u name it. I've made it to the top of the rock course with it, which took some tries, but its doable for sure. It also likes to climb walls, lol. The video attached shows that pretty well. I hope yall get addicted to it like I have, and multiplayer starts to swarm with it, lol. Anyway, if u have any comments feel free to dicuss them in the heavy trucks showroom thread for this release.
The hitch is setup for gooseneck now, but its also got a bumper pull attached, all u need to do is change node 87 and 88 from "h" to "n" or vice versa in the truck file (I made a small section for each node to help make it easier to find in the file), you can choose either one to be "h" for which hitch u want to use at a given time.
The exhaust stack is not a mesh, so it does break if u roll on it heavy, but im hoping to learn mesh soon to have a nice axle, stack, and suspension mesh mod for this.
Daf truck with attached ampliroll trailer.
They are 1 model (like Nitro's Truck&Trailer combo) and it spawns like this from the truckshop. You can't detach the trailer from the truck.
This was just made for the fun of it, but I uploaded it here anyway. Closest thing I could think of to get an ampliroll trailer.
F1/F2 for the arm, and F3/F4 to tighten the ties even more. (they pull the load tight, but not enough to keep the container on the truck. Load container, secrure it, press F4 to keep it from moving around)
Volvo FL12 8wd truck with ampliroll hook, version 2.
Some nodes and beams were added to the arms to make them more stable. There were some reports of it falling over the right, which I hope is fixed now.
Thanks to those who tested it.
Modified from the cement truck (it was the right size for a standard ampliroll container): it has a new unique ID, new textures, 2 new props (exhaust and hook) and it is lifted a bit for better offroading.
This is my upgraded daf 4x6 semi. Changes from the previous version are
- it's shorter
- it has all the new features for 0.33 (flares and stuff)
- I tweaked the engine and gearbox a bit
- I added a new exhaust
My goal for these trucks was to have some more convoy type vehicles that could do pretty much anything. All have working hitches, lights, mirrors, etc. The dumpbed has a contactable surface but it doesnt seem to hold crates really at all for some reason.
All the trucks have ties in the back so if u back up close to a vehicle and press "O", u can tow it around. I commented out the ropables in the back so the ties wont grab them. Ropables in the front are behind the wheels so u can strap it to trailers or tow any of these trucks from there.
There really stable on higher speed offroad like nhelens, and if u crawl slower u can get in most places in tough offroad spots.
The cargo mesh(big canvas cover version) when rolled over, the cargo part will go in the ground, I didnt want to build a box out of beams and nodes to make it contact the ground because i wanted to keep fps as low as possible, so thats something to just live with. Other than that, enjoy.
******************
ANYONE WITH THE INTERNATIONAL 4700 PACK PLEASE READ
******************
I had a few problems that people picked up with the International trucks that I have now fixed.
A smaller problem is a naming issue with the 6x6 Long Flatbed, but the larger problem was a missing beam in the front suspension/steering "diamond" that degraded the strength of the right front wheel and allowed it to "bend" easier.
DELETE THE ORIGINAL International4700Pack.zip. YOU MUST DELETE IT! Otherwise you will get errors upon startup. Download and install this zip to the packs folder, and enjoy. It contains all the same trucks, just with the updates described above.
******************
ANYONE WITH THE INTERNATIONAL 4700 PACK PLEASE READ
******************
This is a mod of the International4700_pack. The trucks are all 1998 International 4700s and are as follows:
5th Wheel (DT466E)
Gooseneck (T444E) [read more]
This is a working concept of a walking beam suspension for RoR, It's a simple truck, the suspension isn't, but it works, and rather interesting to drive.
Feel free to use this truck as a basic for others, just give credit where it's due.
A new skin for the Scania wrecker. Also new emissive. Skin made by letitroutier [skin creators]. New material and truck files mage Gabriel[skin creators]. The zip have the off rods versoin too.
This is the same Peterbilt 362 Cabover semi truck, with the standard RoR diesel sounds. Since 90% of the people are incapable of reading directions, I have uploaded this version.
READ THIS (PLEASE!!)
IF YOUR PETERBILT HAS GAS CAR SOUNDS, DOWNLOAD THIS VERSION! Make sure that you delete your OTHER Peterbilt 362 pack FIRST. Otherwise it will NOT WORK.
These are two of my favorite trucks, 1975 Chevrolet Titan 90 and GMC Astro 95.
The Astro 95 and the Titan 90 both have a Detroit 8v-71 318.
updated again with Sounds, The Titan is now longer in the GN Empire Builder Scheme [read more]
Here's the Kenworth Needle nose Semi truck i've been working on. It's now complete and ready for release. It has Dual exhaust, so when u get 0.34, the Dual exhaust will automatically appear.
I tried to make the truck as realistic as possible, in both looks and driving, so I hope everyone enjoys. Big thanks to DFO for the really nice wheelface's.
I added a small crane to the back of Duece. Now you can use it as terrain editor truck and add objects and roads to most insane places (where duece can go).
Repaint of the daf paris Dakar truck.. i measured the top speed... it gets around 40-45 mph if you have a long enough straight (aspen runway is a good place to try it)
This is a quick mod to the 8X8 volvo appiroll it has 2 rear partical cannons this is a pack of two trucks the slurry partical and (if you want a skin) BE SURE TO READ THE READMEORELSE or you will install wrongly
This is an peterbilt TransAmerican version. I give credits to Trevor,people who made the kenworths,and if i forgot to credit anyone u are credited. I put in new gril lights,paintjob,wideload sign in back,new flaps,and a chain rack in back. hope u like it
This is my first Truck in ROR, a Rosenbauer Simba 8x8!
The watercannon is stearable, it has got flashlights and a sirene. Currently there are not any other special features.
I will post the HRET version later.
Notice How It says antamplirollandcontainerpack, that is not true. the words got cut off but it means GIANTamplirollandconatainerpack. The name basically speaks for itself so... enjoy
A small update for my Simba.
It should fix the very instable watercannon and includes the "ROR International Airport" skin.
It requires the old Simba just look below
A mod of billy lunds boxmack. Its a heavy hauler semi. If anyone can add beacons on the roof and a wide load sticker to the bumper that would be great.
MODS:
Removed the Box in the back
Moved the trailer hitch From Bumper Pull To Gooseneck
Increased overall length of frame
Increased torque to 20000
Increased space between wheels
Widened up the tires
Moved lots of nodes around
mackbox.zip
view details
Gold
Silver
Bronze
