A telecopic trailer based on OVB-55-03V(T) model from Nooteboom.
features and commands:
- can extend up to 40m (CTRL+F1/F2)
- manual steering (F7/F8)
- adjutable suspension (CTRL+F3...F8)
- drop sides, to prevent falling loads (CTRL+F9/F10)
- fully working ligths
- avaible in 3 colors: red/yellow/blue
All commands are written on the front left side of the trailer
second upload to the repository another skin for my company rormart this skin is for the Ekeri trailer for 6x2 Scania R560 that kuru made to install it you just put the DDS file in to your ekeri.zip and you done!
Pull the trailer next to the load so the rear part is at the right place.
Disconnect the rear part with F11 and pull the front part to the front attachment point.
Use a crane to put the load on, the wood load also has invisible legs so it can be loaded without crane, use F9/10.
The steering strength can be adjusted with F5/6 to fit to the length of the load.
The rear part has manual steering for special situations: F7/8, don't use when the steering is already at maximum angle!
The legs fold in automatically if you pull them up with F1, hold F2 until they fully fold out.
The load will attach on the trailer automatically once it is close enough to the right position.
To unload push F12, but attach it to a crane first and put enough tension until the trailer almost lifts off!
Thanks to Lifter for the hookgroups and triggers and for support with this project!
Thanks to fidoj for his roof part load!
Please do not modify this without my permission,
skins can be added using the skin file system: skins-working
If this system is used properly then no need for my permission for skins.
Here is the first US rolling stock, so you can finally tow some waggons with my ALP.
A loadable 40ft boxcar, comes in several liveries.
You can open the doors by grabbing the levers at the doors, the couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
Known bugs:
If you enter a boxcar through the vehicle selection menu game will crash if you try to exit the boxcar, simply change into another enterable vehicle via the menu and exit there.
Thanks to:
donoteat, maddrix for skins
sputnik_1 for helping me with adjusting the node/beam.
Here's a trailer I made awhile back with a detaching Neck. It can haul some big stuff, has a flexbody deck that bends flat with a heavy load and flexes over bumps. Its not all that finished, but its as finished as its gonna get, lol. I made a video to show how to use it
Ctrl F1 to raise the neck so you can back under and lock on
Ctrl F2 seats the neck on the hitch after you locked on
Ctrl F3 attaches neck to the trailer
Ctrl F4 detaches neck so you can drive it out of the way to load/unload
Trailer P-32 is designed for quick transport wheeled and tracked vehicles and other material to the weight of 40 tons. In an emergency, up to 46 tons, maximum speed may be 10 km / h Is designed for off-set with tractor on roads I to III. class, the roads are paved and after tolerable terrain without external imbalances and obstacles.
Technical and tactical data
Dimensions:
- Total length (including shaft): 9475 mm
- Overall height: 1420 mm
- Height of the loading area: 1000 mm
- Overall width: 3100 mm
- Wheelbase: 4410 mm + 1000 mm
Loading area:
- Length: 4900 mm
- Width: 3100 mm
weights:
- Standby: 10,600 kg
- Payload: 40,000 kg
All content is for use in Rigs of Rods only. Read the copyright file included in the zip!
This is a small map I built for my erectable wind engine.
Features:
- Contains all parts of my fully transportable and erectable wind engine. See included manual for button assignments
- A winding road to transport the windmill pieces
- A small train track with tunnels
- Nice looking textures and vegetation (Thanks for all your help DeGa!)
I will not make a FPS version of this! If your PC can't handle it, buy a new one.
Credits:
- sputnik_1: meshes, node and beam, textures, map
- DeGa: massive help on the terrain, thank you so much
- BigBoy, Craneman, Inviteds, Donators: testing and help, thanks a lot!
Submarine Deep Sea 9 - or DS9
For Science and Research..
speed: ~16kn
divedepth: all the way down to 30 meters and beyond..
features:
- crane arm to salvage crates, cars and other stuff.. - I lifted 1.7 tons with it.. probbably goes more..
- cockpit with 4 windows to see, what is around under the water..
- trailer-interface - is needed to load it on a trailer for land transport
- some nodes to lift it with a crane - you need something like Demag ZKKE
- tower-camera
- periscope-camera
the zip contains:
- submarine DS9
- 3 FPS versions with reduced quality or even removed some cameras - made a lot difference..
- trailer-interface
Maps release pending - WIP:
Submarine World 10 - The Ocean 2 (discussion here: The-Ocean-2), Submarine Cave 01 - The Maze
check the forum thread for updates
This submarine is open source - do with it as it pleases you..
credits:
textures: cgtextures
mesh: me
N/B: me
Thanks to my beta testers..
coen273, hotrod55, RangeRover184, Raydan, kheridr
Also thanks to the helpfull members in the forum thread..
I'd like to mention: Miura, DODGE charger, Aivar
nooteboom_teletrailer-T42.zip
view details
Gold
Silver
Bronze
