dry box trailer with good detail modeling and texturing, disponible to tow a trailer or two trailers according to your preference. ideal for easy reskin.
can cause errors with the brakes, the second trailer, for example be anchored or lack of brakes (this is most common).
The basic N/B is unchanged, as this was before I started really modding N/B shapes. The suspension is the same design, and it had a lot of potential, it was just limited by the shocks. It is now much more flexy and a bit better at offroading than the rock-solid suspension that the original had. It accelerates a bit too fast in the first few gears, but by the time you hit around 13th it starts smoothing out. It tops out at 86mph. Differentials were added to aid in this speed, and they have open, split, and locked options. Please enjoy this update, as a lot of tuning was done and much time was spent doing it.
September 18th 2014: v1.4, see changelog
Here is a 1st Generation Bluebird Vision, very heavily updated.
The 1st Generation Vision was a type C bus made by BlueBird from 2003 – 2007.
-Animated props (including openable e-door and roof hatches)
-Changeable seat and floor color textures*
-District name on the side of the bus
-Selectable 8-way types (dropdown in the spawn menu in <0.39, separate truck files in 0.4+)
-Videocamera mirrors (0.4 version)
-Includes both <0.39 and 0.4+ versions (that way if a server has both <0.39 and 0.4+ clients, hopefully you can see both versions)
-Stop arms and crossing guard operate without engine power (0.4+)
-Some new textures (including a number)
-Fixed roof texture (you can actually change it now)
-Press "G" for a surprise!
-Added full-length bus w/ wheelchair lift ("handy" version)
-All 0.4 versions have optional working mirrors
-Added shorty version
-New engine and air sounds
-Added optional new stop arms (Aug. 30th)
-G2s are now an option on the handy and shorty versions
-Added 0.38 shorty and handy versions (Aug 31st)
-Added Upgraded G2 Fusion as an 8-way type on all 0.38 buses
-Fixed door texture and flare issue on the 0.38 shorty Sept 20th:
-Performance boost (+6mph)
-Fixed a texture problem with the rubrails and roof exits
-Animated the driver's window (F8)
-Corner of the gauge cluster prop no longer clips through the dash
-Fixed material problem on normal body mesh
-Properly calculated suspension spring and damping
-Fixed downshift issue (you can come to a complete stop from 6th gear without stalling)
-Fixed jittering/shaking while steering
-More suspension tuning to remedy the jittering
-Videocamera mirrors available for all 0.38 versions
*You can download different seat/floor textures here: Brown Black Green Red Blue Here is the PSD for the district name, making editing it with the same font easy.
Brickman & Dereksh97: Original free-to-use-with-credit bus n/b
SBF- critiquing and suggestions
Khadner- CAT C7 sounds
ROR-EMS- CM300 Radio mesh
Carsonj493- BlueBird Vision 3D model
graysonk95- Making the bus!
No public mods, however, you may distribute customized textures, no permission needed.
Hello, this is a Reedy Creek Emergency Services (Aka Disney World Fire Department) skin for my Intl 4300 Ambulance (http://www.rigsofrods.com/repository/view/4032). The flares will not match up with the skin, but feel free to fix the flares and upload a fixed version to anywhere so long as I am credited and notified.
Trailer P-32 is designed for quick transport wheeled and tracked vehicles and other material to the weight of 40 tons. In an emergency, up to 46 tons, maximum speed may be 10 km / h Is designed for off-set with tractor on roads I to III. class, the roads are paved and after tolerable terrain without external imbalances and obstacles.
Technical and tactical data
- Total length (including shaft): 9475 mm
- Overall height: 1420 mm
- Height of the loading area: 1000 mm
- Overall width: 3100 mm
- Wheelbase: 4410 mm + 1000 mm
- Length: 4900 mm
- Width: 3100 mm
- Standby: 10,600 kg
- Payload: 40,000 kg
This is the SKINZIP for the International 4400 Rollback.It is in the Tims Truck Service&Towing company design.Just put the file into the packs folder.you need the original 4400 files in the vehicles section.
I felt like RoR needed a new 53' trailer, so I whipped one up.
DODGEcharger (me) - Everything pertaining to the trailer
Skype group - motivation and support
Dryvan and Reefer version
Accurate and detailed model
Flares2+materialflares for the best look at night
Opening doors (Ctrl+F3/F4)
Plenty of ties for securing your load
Skins are ok to release without my permission, you must use the skinzip system though. But beware, skinzips will break the materialflares, it's a known bug. As for other forms of modding, you are required to have my permission if you want to release the modification. Modding for personal use is fair-game as always.
Something that started as a simple UV mapping experiment, taking a paper-toy and turning it into a 3D model. It turned into this.
- All dah submeshez!
- Fully depressing interior (With gauges!)
- Upgraded rally wheels!
- Crisp and lifeless suspension, extra unrealistic!
- Crowded rear seat for your friends, roomy boot for your victims!
- Ultra-low-tech emissive file!
- Hot-Wheel-like deformation, for you destruction fans!
I know it might be hard to believe, but this marvel was all made by me. You may begin your accusations of theft immediately.
In all seriousness, you're wasting precious moments of your life by mearly reading this post. If you've made it this far, there's no hope left for you. Should you proceed to be daring enough to actually download the car, you'll regret this day so long you shall live. You've been warned.
The permission to upload skins of this was given in the thread:
Originally Posted by Stoat Muldoon
-You can redistribute custom skins without restriction and without having to ask permission
The skin is compatible with the original one and this one: Skin-Requests
If there's anything not ok with please PM me.
Edit: I think I can't add a comment, so here's my answer to Magnums question: You won't be able to use this skin then. But everybody can open a .truck file, you don't need a program for that as Windows says you. Tell Windows that you want to open it with your text editor and it will work.
Hopefully this will be my last and best version of my crawler. Using blender I reworked the body and resized it to appropriate sizes. Moved some nodes around, and skinned it (sorta, Im not much of a skinner)
So have fun, I honestly dont know what else I can do with this, but Im open to suggestions. And if youre wondering why its called "The Turtle" its because I thought it looked like one. plus the design also reminded me of the TrailTough competition buggy seen here: http://trailtough.com/images/UROC_small.jpg.
This file also include the BFG krawlers so you dont need to download any additional files and wont harm any existing trucks of mine if youve downloaded them.
There are two additional skins included:
1) a lame attempt at a turtle skin
2) template if youd like to make youre own skin.
This is the dodge police is by Pricorde (everything pretty much)
with mods by me, Xbox360legitgamer, including:
-tuned engine (you can finally go above 60 MPH)
By the way, this is my first upload
Hello, I was looking at the skins with the beverage trailer by dixiecowboy, i saw that the pepsi one had two different logos on it, the one used from 1998-2003 and the one used from 2003-2008. That drove me crazy, so i fixed it to all one logo. so, here's my updated version. Credits: dixiecowboy, silvermanblue and DarthCain for the trailer and skins, google for logos. This is a skinzip, so put in your packs folder. Enjoy!
This car was originally made by dhymers sometime ago. I basically redid the whole thing. The meshes are all redone, the nb is tuned and is substantially faster. Handles realistically and crashes pretty well.
dhymers, original creator
rorlover563, redoing it
And a thanks to Austin_ for a bunch of blender help.
READ THIS!: on some maps when you spawn it in the garage the mesh will turn sideways. Use the ingame spawner not the truck spawner. Thanks!