UPDATE: I've been working on a variation of my own and it's complete, or close enough. It is fully submeshed and will contact with other vehicles(that must to be contactable). It's sides and tail can fold down. The rear rollcage can be lifted using Ctrl+F4/Ctrl+F6. It has ties in the back so you can drive an vehicle into it. Unfortunately all the stuff I added makes it too "tippy" to carry a vehicle into water anymore but driving on land is fine. Also has a trailer hitch that can be completely folded away if you're not going to use it. All controls are listed in-game. Have fun.
This is an Tatra 813 pack I modified from Pricordes original versions and added "Wheels2" to all of the models so you can inflate/deflate the tires. Also updated to work properly in the latest RoRs release as it was having texture issues before. Use [ to deflate and ] to inflate the tires. This is not as easy on your system as the originals were. They were only about 1300 beams before, now each has over 2800 to properly simulate the wheels.
NOTE: You will need to enable advanced wheels in the configurator under the "CPU" tab to enable "Wheels2" in versions older than 0.38.33.
Please note the credits for the crane go josh (1239) who made the original.
hi, here is a ford f-650 RBP truck i mainly worked on the front and back of it, i added a RBP grille, RBP diesel performance logo on the hood, RBP logo mud flaps, and RBP rims. All the credit does to the orignal authors. It has good susupension great for crawling and even baja yet hard enough to keep it stable, also large tires and a large which are good for mudding. so this is basically an all terrain ford, have fun with it. P.S the screen shot doesn't do it justice
Here is another version of my Ford F-650 I put ford logos on it new rims and a blue strip on the side and that pretty much it. and it won't overwrite the RBP version. It is the same as the RBP truck just skinned differntly. Have fun with it
UPDATE
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
UPDATE2
fixed the spelling mistake on the ropables so they all work now
UPDATE 3
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
The Track Network:
-Fully controllable Points (f3/f4)
-Bridges
-Straights
-Left & Right Curves
-Stations
-Goods Loading Ramp
-Collision Meshes
-Custom Non-overwriting N Helens Map
Installation:
-Simply place the .zip in your: My DocumentsRigs of Rodsterrains
-Does Not Overwrite
-Unique N helens map
Credits:
-Custom Sounds from the Free Sound Project
-Original N Helens Map by Pricorde etc.
-Everything else built from scratch by me, Al T.
-Thanks to the beta testers, coco for help with the engine and everyone on IRC for help or suggestions.
Usage:
-Take corners no faster than around 40mph.
-Doors controlled by f1/f2
-Points controlled by f3/f4 from the trains (must be very close)
-Directional Lighting controlled by (,) and (.) or the indicators.
-The trains are allready on the track.
*Do not release a mod of this without my permission*
This is my off-road concept vehicle. It looks somewhat like a hybrid between those "duck tour trucks" and a side by side Atv. Please note that this is as far as i will go on this project, and also the mesh is in the file but it shows up transparent black. I don't know how to fix this. Feel free to modify this in any way conceivable, but you must add my name for the node and beam structure. Also note this is an (off road vehicle) drive slowly---under 45 mph--, otherwise you will destroy the suspension.
feel free to message me with any questions --Ben5---
Melroe M-880 Prime Mover
This is a prime mover for real heavy loads build out of a former wheeled skid-steer dozer. Like the real thing it does not have any suspension but a lot of power ;-) .
My RoR model features some animated parts like the cooling fans and levers inside the cab as well as some custom sounds.
Mesh and N/B all by me, please do not upload any mods without my permission, thanks :-) .
This is my 1964 Jeep Wagoneer.It is currently a rock crawler/mud truck.The jeep has working hydro's in the rear to stiffen the suspension & it also has a hitch just in case you decide to pull something with it.
UNIMOG 406
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
Disclaimer:
-mods for personal use ok, but don't ask to release your super engine power lift kit mod, or to use the rims/tires on your vehicle to showoff, it ain't gonna happen, yo.
The Volkswagen T3 Van.
You will get some different versions, so you can explore the racetrack as well a deep mud and high mountains.
Versions are:
2WD
Stock Volkswagen T3 van with rear wheel drive. Has a locker in the back for difficult situations like towing a trailer.
2WD Race
A tuned and lowered T3 RWD. It is more light-wight, has a stiffer suspension and a rear locker (split - locked) for a good handling and easy drifts.
4WD Syncro
Stock Volkswagen T3 Syncro with four wheel drive and two lockers (open - rear locked - both locked). It has a special gearbox with a extra low crawler gear and is optionally available with rear wheel steering.
4WD Syncro military
Lifted T3 Syncro with a bit bigger tires and modified bumpers for greater attack angles.
It comes with a camouflage skin to be nearly invisible on Belgium terrain.
Also available with rear wheel steering.
All versions except the race one have a deployable hitch for towing trailers, just attach a camping trailer and go camping
And please don't complain about its boxy look, the real car is as boxy, too.
Commands: press T to see the commands ingame
Rear wheel steering (some versions):
F3 and F4
Hitch:
Press F6 to deploy the hitch from under the car. Use the hitch only when it's deployed!
Press F5 to retract it again.
Update: The Airbrake sound is removed since it doesn't suits a car.
Update 2: - Improved handling and more realistic engine and gearbox settings, now it has realistic power and its real gear ratios.
- New mesh wheels and mesh parts for the race version (from Buttlamo's Vehicle Customization Parts thread).
- New mesh wheels for all syncro versions, big thanks to dmtactical for letting me use the wheels of his Nissan Hardbody.
NOTE:
- This is a project of Silvermanblue and me, so I haven't done all the work. If you like the car, please thank him, too!
- This project is based on a heavily modified highroof van from Trevor, he has full credits for the base chassis.
Credits:
- Mesh wheels (Race version): Cydex
- Air intake, intercooler and exhaust: Beolex
- Mesh wheels (Syncro version): dmtactical
This is an 8x8 Offroader based on a MAN-TGA chassis.
It is made for offroading so don't expect it to handle well at high speed.
However, I tried to keep it as highspeed-friendly as possible.
But the main aim is to perform well in rough terrain.
In the readme, there are instructions on how to enable the enclosed wheel meshes.
This vehicle features the "Driving right out of the package" concept.
So put it straight into your data/packs folder and you'll be fine.
Please note that it is my first vehicle and I''m still learning
This is the finished version of the ERF EC14 Wrecker & Loader that i started many months ago.
It has new UID's so they are standalone to any other version's of these vehicle's.
I have added a winch to the boom now so it is easier to rescue cars. If you find any problems or have any suggestions please post them in the discussion (Link below).
As with the numberplates bieng English i have done them to be realistic & are from the Prefix era. With the 1st letter meaning the trucks age in this case. These ERF's are M reg' so are from 1 AUG 1994 to 31 JUL 1995. http://www.number-plates-car-registr...ion_years.html
I have created the engine to be realistic of a derestricted ERF with a top speed of around 90mph. The engine is more powerful just below its max RPM so when it starts to struggle accelerating just change up a gear & it will keep going.
This is my "Löschgruppenfahrzeug 16/12" in english a Fire Engine.
You can open the doors of the cabin and the equipment structure with the F1 to F10 key.
In the back of the truck is a hose reel that you should load up.
So you can move the holder up and down with Ctrl+F1 and Ctrl+F2 and you can change the angle of the hose reel (Ctrl+F3 and Ctrl+F4) so its a little bit easier to hook it up (with "O")
Credits: The truck is copletely made by me (the Fire Extinguisher in the cabin is from the Sketchup Gallery and the wheel texture from RoR)
///Deutsch////
Hier ist mein Löschgruppenfahrzeig 16/12 (LF 16/12)
Man kann die Türen der Kabine sowie des Aufbaus mit den Tasten F1-F10 öffnen.
Die Schlauchhaspel hinter dem Auto kann man anhängen (mit der Taste "O")
dazu kann man die Halterung mit Strg+F1 oder Strg+F2 Hoch und Runter Bewegen.
Den Winkel der Schlauchhaspel kann man mit Strg+F3 und Strg+F4 ändern.
Credits: Das Fahrzeug habe ich bis auf den Feuerlöscher und die Textur der Reifen komplett selbst erstellt
MB LAF 1113 B TWH GKW 1
A truck of the german THW, federal agency of technical relief.
It features a light pole in the back, openable sides, a searchlight and a winch in the front.
Feel free to modify it, but make it not conflicting with the original one if you want to release it.
I have decided to go ahead and release the Bobcat S130 Skidsteer Loader with the bucket attachment, along with a hay bale that can be used with it. [read more]
Repository Home
Manage your files
Statistics
CDN overview
Tatra813Pack.zip
view details
(gold)
(silver)
(bronze)
