UPDATE: I've been working on a variation of my own and it's complete, or close enough. It is fully submeshed and will contact with other vehicles(that must to be contactable). It's sides and tail can fold down. The rear rollcage can be lifted using Ctrl+F4/Ctrl+F6. It has ties in the back so you can drive an vehicle into it. Unfortunately all the stuff I added makes it too "tippy" to carry a vehicle into water anymore but driving on land is fine. Also has a trailer hitch that can be completely folded away if you're not going to use it. All controls are listed in-game. Have fun.
This is an Tatra 813 pack I modified from Pricordes original versions and added "Wheels2" to all of the models so you can inflate/deflate the tires. Also updated to work properly in the latest RoRs release as it was having texture issues before. Use [ to deflate and ] to inflate the tires. This is not as easy on your system as the originals were. They were only about 1300 beams before, now each has over 2800 to properly simulate the wheels.
NOTE: You will need to enable advanced wheels in the configurator under the "CPU" tab to enable "Wheels2" in versions older than 0.38.33.
Please note the credits for the crane go josh (1239) who made the original.
UPDATE: I've been working on a variation of my own and it's complete, or close enough. It is fully submeshed and will contact with other vehicles(that must to be contactable). It's sides and tail can fold down. The rear rollcage can be lifted using Ctrl+F4/Ctrl+F6. It has ties in the back so you can drive an vehicle into it. Unfortunately all the stuff I added makes it too "tippy" to carry a vehicle into water anymore but driving on land is fine. Also has a trailer hitch that can be completely folded away if you're not going to use it. All controls are listed in-game. Have fun.
This is an Tatra 813 pack I modified from Pricordes original versions and added "Wheels2" to all of the models so you can inflate/deflate the tires. Also updated to work properly in the latest RoRs release as it was having texture issues before. Use [ to deflate and ] to inflate the tires. This is not as easy on your system as the originals were. They were only about 1300 beams before, now each has over 2800 to properly simulate the wheels.
NOTE: You will need to enable advanced wheels in the configurator under the "CPU" tab to enable "Wheels2" in versions older than 0.38.33.
Please note the credits for the crane go josh (1239) who made the original.
hi, here is a ford f-650 RBP truck i mainly worked on the front and back of it, i added a RBP grille, RBP diesel performance logo on the hood, RBP logo mud flaps, and RBP rims. All the credit does to the orignal authors. It has good susupension great for crawling and even baja yet hard enough to keep it stable, also large tires and a large which are good for mudding. so this is basically an all terrain ford, have fun with it. P.S the screen shot doesn't do it justice
Here is another version of my Ford F-650 I put ford logos on it new rims and a blue strip on the side and that pretty much it. and it won't overwrite the RBP version. It is the same as the RBP truck just skinned differntly. Have fun with it
This is my off-road concept vehicle. It looks somewhat like a hybrid between those "duck tour trucks" and a side by side Atv. Please note that this is as far as i will go on this project, and also the mesh is in the file but it shows up transparent black. I don't know how to fix this. Feel free to modify this in any way conceivable, but you must add my name for the node and beam structure. Also note this is an (off road vehicle) drive slowly---under 45 mph--, otherwise you will destroy the suspension.
feel free to message me with any questions --Ben5---
Credits go to Lifters for some great suspension and interior work!
Dodge 1500 - Baja Edition
3x suspension presets: Road/Offroad/Rough // 3x Ride Height Presets: Road/Offroad/Crawling
Constant 4x4, lots of torque, insane ground clearance and 4 wheel steering
All this along with a meter of suspension tr
avel makes this a pretty rough offroader.
F3-F6
CTRL+F1 / CTRL+F2 to adjust suspension stiffness
CTRL+F3 / CTRL+F4 to adjust suspension height
Features:
-Real weight, real power, real scale. (so don't expect to tow the ror trailers that way a kabillion lbs.)
-Lockers (press W)
-Operational dump bed, & tailgate
-Contactable bed to load vehicles or objects with ties (press O to tie down load)
-Animated winches on all except cargo version, some even have a rear winch.
-Flexbody everything pretty much
-Specular Shader
-Detailed Animated Interior with shifter.
-custom deuce sounds, with added turbo
Known issues:
-Shader shows up black sometimes, restart ROR until it appears normal, or download boring material below and drop in deuce zip.
-5th wheel version breaks when hooking to some trailers
-No flexbody tires (would be way to cpu heavy, it already is)
I decided to add full collision since Multiplayer now has collision. They should crash somewhat well into each other. You can crawl on them with the truggy or other big vehicles There also Blue in this version.
This is a standalone zip, so just place in packs or vehicles folder and play.
UNIMOG 406
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
Disclaimer:
-mods for personal use ok, but don't ask to release your super engine power lift kit mod, or to use the rims/tires on your vehicle to showoff, it ain't gonna happen, yo.
Remember this is a trail rig, it has soft suspension. High speed control is limited because of this.
Real Samurai gearing (exo version has two extra crawler gears)
Flexbody (damage and shiny texture)
Custom Sammi sounds (thanks to Aperion for recording them straight from his samurai)
Working leaf springs, and shocks.
Just a all around fun vehicle to mob around in. Place the Zip in your packs or vehicle folder.
The Volkswagen T3 Van.
You will get some different versions, so you can explore the racetrack as well a deep mud and high mountains.
Versions are:
2WD
Stock Volkswagen T3 van with rear wheel drive. Has a locker in the back for difficult situations like towing a trailer.
2WD Race
A tuned and lowered T3 RWD. It is more light-wight, has a stiffer suspension and a rear locker (split - locked) for a good handling and easy drifts.
4WD Syncro
Stock Volkswagen T3 Syncro with four wheel drive and two lockers (open - rear locked - both locked). It has a special gearbox with a extra low crawler gear and is optionally available with rear wheel steering.
4WD Syncro military
Lifted T3 Syncro with a bit bigger tires and modified bumpers for greater attack angles.
It comes with a camouflage skin to be nearly invisible on Belgium terrain.
Also available with rear wheel steering.
All versions except the race one have a deployable hitch for towing trailers, just attach a camping trailer and go camping
And please don't complain about its boxy look, the real car is as boxy, too.
Commands: press T to see the commands ingame
Rear wheel steering (some versions):
F3 and F4
Hitch:
Press F6 to deploy the hitch from under the car. Use the hitch only when it's deployed!
Press F5 to retract it again.
Update: The Airbrake sound is removed since it doesn't suits a car.
Update 2: - Improved handling and more realistic engine and gearbox settings, now it has realistic power and its real gear ratios.
- New mesh wheels and mesh parts for the race version (from Buttlamo's Vehicle Customization Parts thread).
- New mesh wheels for all syncro versions, big thanks to dmtactical for letting me use the wheels of his Nissan Hardbody.
NOTE:
- This is a project of Silvermanblue and me, so I haven't done all the work. If you like the car, please thank him, too!
- This project is based on a heavily modified highroof van from Trevor, he has full credits for the base chassis.
Credits:
- Mesh wheels (Race version): Cydex
- Air intake, intercooler and exhaust: Beolex
- Mesh wheels (Syncro version): dmtactical
This is an 8x8 Offroader based on a MAN-TGA chassis.
It is made for offroading so don't expect it to handle well at high speed.
However, I tried to keep it as highspeed-friendly as possible.
But the main aim is to perform well in rough terrain.
In the readme, there are instructions on how to enable the enclosed wheel meshes.
This vehicle features the "Driving right out of the package" concept.
So put it straight into your data/packs folder and you'll be fine.
Please note that it is my first vehicle and I''m still learning
This is just a small amphibious ATV made in the 1970's. It's by far my best creation yet!
Features:
Fully independent suspension, with moving suspension meshes. (Except on the versions without suspension)
FlexBody.
Working control sticks.
Realistic top speed and handling.
6 versions! (Namely. Stock, Springer, Race, Crawler, Touchobut Special, and The McKay Racer)
Fully amphibious.
My first fully meshed vehicle.
Credits:
Me (DODGE charger) - Base vehicle and the majority of the work on this
Creak - Engine and help with floatation
Touchobut - Improvements on crawling performance (Crawler version)
Off-Roader - Request for this to be made, specs, and engine sounds
Nightmare80 - Dashboard texture
Here's my jeep, it's been in development for nearly a year, it's my first vehicle that I finished.
It features:
-Seperate hood/grille, for (atleast decent) deformation (My first try):
"Deformation is awesome." -Gabester -Dana 44 axles
-Atlas II transfercase
-Powerglide transmission
I've used real life gear ratios from both the gearbox and transfercase.
-Hemi engine
With custom sounds.
-Custom liftkit
Credits to Fat-Alfie for his shock texture.
-Beadlocks
-38" Pitbull Rockers
-Custom made rollcage
-Bucket seats
-Rotating driveshafts
-Openable boot and bonnet
-A wide variety of moving parts
-Super soft tyres
Thanks to Fat-Alfie's wheelbeams
-and lots more.
[18-03-2012]-Fixed the idle sound, added ropables, made steering stronger. [08-05-2012]-Wheels tuning: added meshwheels2 and did some more tuning to Fat-Alfie's wheelbeams. Less bouncy wheels, better handling on and off the trails. -Minor fixes.
Here's my jeep, it's been in development for nearly a year, it's my first vehicle that I finished.
It features:
-Seperate hood/grille, for (atleast decent) deformation (My first try):
"Deformation is awesome." -Gabester -Dana 44 axles
-Atlas II transfercase
-Powerglide transmission
I've used real life gear ratios from both the gearbox and transfercase.
-Hemi engine
With custom sounds.
-Custom liftkit
Credits to Fat-Alfie for his shock texture.
-Beadlocks
-38" Pitbull Rockers
-Custom made rollcage
-Bucket seats
-Rotating driveshafts
-Openable boot and bonnet
-A wide variety of moving parts
-Super soft tyres
Thanks to Fat-Alfie's wheelbeams
-and lots more.
[18-03-2012]-Fixed the idle sound, added ropables, made steering stronger. [08-05-2012]-Wheels tuning: added meshwheels2 and did some more tuning to Fat-Alfie's wheelbeams. Less bouncy wheels, better handling on and off the trails. -Minor fixes.
Land Rover SIII Lightweight trail rig
======================
I tried to make this rig have good weight, realistic flex and good grip. The mesh is one of my old ones from 1nsane (so it's pretty low-poly), with new higher-poly details.
There are 7 versions included. 6 high-poly with reflective materials, and 1 low-poly with non-reflective materials.
If your PC struggles with the 3D treads, edit the .truck file to use s3wheels2.mesh (textured tyre tread).
Hit Ctrl-1 for spotlights.
I hope you enjoy my first vehicle for RoR.
Thanks to Box5Diesel, Miura, Thomas, Lenni, Betzi, Joebus, Squishy and KevinMCE for testing, help and advice (sorry if I forgot anyone).
Some slight bugs still exist like the front axle bending when turning.
Pretty good offroad capabilities.
Press "O" when you enter to lock the back door & press it again when the bed is at about 10 degrees
Their is no submesh on the bed yet
Credits:
Kuru for the N/B, Engine, Tool boxes & Fuel tanks
Lenni for the wheels
HRVI for making them
Any questions or what ever PM me or ask on here: Scania-142-Heavy-Hauler-Tipper-(Beta-First-Final-public-release)
Do not release mods without asking me via PM first!
Hey, This is a Undercover Police mod for the Box5 Dodge Ram.
If you have my 1st Version, Please Delete! Thank You
What Does it have?
-Flares CTRL+1/CTRL+2
-Sirens
-ABS/TCS/Slope Brake
-As Some Props
-Differentials Locked/Open
BIG UPDATE!!!
-Now are Gray
-Renamed Vehicle to "Dodge Ram 12v Undercover"/"Dodge Ram EXT. 12 Undercover"
-Fixed Description
-You Dont need to delete Original Ram
Credits/Permission
DODGE charger (Props)
HEMI (Props)
Box5 (Release)
tman 434 (Fixing the original skin as flares)
0429matthew (flares)
LGxDevil (Placing Props,Siren, TCS/ABS/Slope Brake, As other stuff)
The zip contains a copyright. Read it if you would like or dont but if you steal any part of this vehicle without the written permission of me you will be reported.
This is my newest projects and probably my best designed and nicest looking vehicle yet. I really tryed to push my abilities for this one and Im glad I did because it turned out great.
Thanks to my beta testers for all the feedback: DeGa,LJFHutch,ICEMAN[U.S.A], Fat-Alfie, Maku, and VeyronEB
Enjoy and feel free to post modified skins and pictures here Showtime-Buggy
Do not steal my meshes, N/B, or any part of this vehicle
This is my newest projects and probably my best designed and nicest looking vehicle yet. I really tryed to push my abilities for this one and Im glad I did because it turned out great.
Thanks to my beta testers for all the feedback: DeGa,LJFHutch,ICEMAN[U.S.A], Fat-Alfie, Maku, and VeyronEB
Enjoy and feel free to post modified skins and pictures here Showtime-Buggy
Do not steal my meshes, N/B, or any part of this vehicle
Tatra813Pack.zip
view details
Gold
Silver
Bronze
