In a game where approximately 99.9% of the players like to see things get destroyed, mauled, smashed, torn to shreds, incinerated, devastated, set on fire, and blown up, a load like this is more than necessary. Oxsergy and I (Beolex) bring you the Destructible Barricade. This is a meshed load which makes a good backdrop as scenery to your terrain, or just eye-candy for you masochistic freaks that like seeing things get destroyed. It is a tri-section load, meaning it has two legs and a board that can all rip apart for your disastrous pleasures. It is recommended that you pre-place it on a terrain so it is permanently there whenever you run the game, but it is also lift-able (via crane/boom) and can be placed in the bed of a vehicle and secured, too. However, to keep this barricade realistic, it needed to be semi-weak so it can be destroyed by most moving forces. As a result, hauling/lifting this with machinery can result in the barricade breaking, as it is fragile.
CREDITS
Beolex - Mesh creation and texture work
0xsergy - N/B structure and refinement/finalization
This is a basic traffic cone I had knocking about for quite some time. You can either use a crane to move it around or place them on a terrain.
It has a low polygon count and has a very simple node and beam structure, so you should be able to spawn many before getting a large FPS drop.
It is also contactable + ropable, and is ~1m high, weighing 7kg.
Credits:
Metalmuncher: Meshes, Node and Beam, Texture
Requires a recent version of Rigs of Rods: 0.38.42 +
Throw it into your packs folder in My Documents.
No need for permission to modify or use, just credit me.
This is a modular house often used on constructions site or as a modular office. It is a simpel mod of the 20ft container by LostSoul3471. I added 4 more hock nodes, this will not efect how the container forklifts handles it, but make it easier to lift it with cranes. I also made it lighter than the original container. you can stack them on each other. It is fully independent and will not overwrite the original containers. It is still a beta.
This pack includes the 'Atlas' class tugboat for Rigs of Rods (version 0.38.67) and 3 different unpropelled barges designed to work with the tug.
The Atlas tug features:
- Nav Lights (Ctrl+1)
- A pair of rear hooks (F9/F10) designed to link to the barges (L).
- A main hook (F11/F12) that can link to most other loads or boats (also L).
- 4 skins
- Works with the .skinzip system
The barges feature:
- An empty generic barge (100 tons)
- A loaded bulk barge (425 tons)
- A liquid goods barge (300 tons)
- Pairs of hooks on each end (F1/F2 and F3/F4) that can link to the tug or other barges
- If two barges are lined up and close enough to one another, they will link automatically (Alt+L to unlink)
FIX
Liquid goods barges wouldn't link to one another. If you downloaded before this fix, please replace your old Atlas-n-barges folder with this one. Sorry for the inconvenience.
Here's a quick tutorial of how to best dock the tug with a barge:
- Spawn a barge and an Atlas tug and line up with a barge. That should get you used to the tug's controls. Keep an easy hand on the steering wheel, she's slightly nervous.
- Extend your rear hooks a bit (F10), that'll make things easier. Not too much though.
- Add some reverse throttle and back up towards the barge slowly and carefully. Keep an easy hand on the throttle.
- If you're really close to the barge (and still lined up), bring the tug to a halt. Once stopped, hit "L" and wait for the ropes to link up.
- Now extend your rear hooks further for some safety margin between the Atlas and the barge. Congratulations, you're ready to go.
If you want to release a mod of the Atlas or barges, follow 2 simple rules:
- Credit the original author (or authors, if you're modding a mod)
- NO conflicts with the original version! Change all material names, mesh names, texture names, give it an all-new UID and GUID.
If you just want to make a skin for the Atlas or barges, make a *.skinzip. After all, that's precisely what the system was designed for. The good news is you won't have to worry about conflicts with the original.
This is my first upload. I made ?pallet of gold for you. They are four variants ( 1095 kg,1976 kg, 2912 kg, 3432 kg). Sorry for my bad english. Enjoy it
Autor: Pedro
Vojta1991
37.00-R57 tire from a Komatsu 730E-7, load weight 4000kg, usable as a chock for other loads or to load onto a trailer for transport or to roll down a hill for a laugh.
if you wanna use it for something else add my name with it or at least send me a message.
this is my modification to Box5diesel's sledpull
I added an engine an other skin and a beacon
credits: Box5diesel for the original sledpull
and me ( jerom ) for the modification's
This is a pack of wooden crates. I have attempted to make them sort of high-detail and I think I have succeeded for the most part. There are many variations inside, so look at the list below. In the future I am willing to make more requests for different versions. These crates have a 'hooking point' for cranes and also have 'ropables' so you can fasten them to other vehicles. They also include a submesh so they can be contactive with other submeshes/contactive structures. They emit really good framerate because of the simply-low node/beam count. They can be used in groups without affecting your framerate heavily. There are many versions, too.
Normal (OSB)
IKEA
THW
UN (UNHCR)
U.S. Army
TNT Crate
Radioactive biohazard
DHL Express
Soviet Crate
CREDITS
Beolex - 3D Modeling/nodes & beams/texturing
Venem - Assisting with beam color
Here is a Flat screen TV that you can load into the back of a pickup truck. It is contactable to vehicles that have a contactable submesh.
Included is a template to add your own image to the TV screen.
This is my new lifting equipment for lifting a concrete floor.
The lifting frame will automatically attach to the floor when they are close togheter!The floor can be detached with CTRL+ALT+F9/10. Be sure that your crane has forwardcommands otherwise this won't work!
Today, me and Brickman bring you a generator load, the RORGEN GX70000. It is simply a mesh placed on a n/b chassis.
Features:
-Engine, for realism.
-Ropables, so you can pick it up with a crane.
-Contactable, so you can place it in a truck bed or on a trailer.
-Exhaust, for realism.
-Full-Mesh
-It also features a large wheel on the inside (viewable by pressing the "K" key), which spins faster as the engine RPM increases .
We are hoping to release updates and/or new models under the RORGEN name, so stay tuned!
Credits:
Me (ROR-EMS): Mesh, idea
Brickman: All N/B work, Engine, Mesh help.
Feedback is always welcome!
Note: If you want to use the n/b, mesh, or any components of this project in a mod of your own, please request permission from me first, and I will either grant/decline you permission for the parts of this project I am responsible for, or I will forward you to Brickman, for the parts he is responsible for.
the bridge is a base of the confederation bridge in canada.
It is 1km long (in real 14km ) and between 40 60 m heigh .
You can drive (in real only walk ) in the bridge, it is hollow.
The bridge is not complete ,you have only lift the brigdesections on the pillar,they are 200m long and weight 25t (in real 8000t )
I have made the bridge sections so light, it's now easy to lift with a high crane ( min 100m heigh ).
The ties on brigdesections are so long for stability.
IT DON,T WORK IN 0.37
MANUAL
1 first lift the brigdesection near a ramp so you can see the right position
2 Lift the triangle belowe the brigdesection over the top of the pillar.
3 Each side of the brigdesection must be higher than the near the brigdesection (when lower, the invisable surfaces don,t work)
4Llower the brigdesection about in the right position.
5 When it lean on the pillar ,you can pull (slowly) it, with the left mouse bottum on the right position .
In the right position it lock automatically.
IMPORTANT
to spawn the bridge in your flatmap, place these text in your flatmap.zip , in file f4afUID-flat_map_full32xa.terrn under name loads.
Repository Home
Manage your files
Statistics
CDN overview
oil_filter.zip
view details
(gold)
(silver)
(bronze)
