|
|
|
|
I was bored, so I made a simple, just a nodes-and-beams-submesh toilet, that can be picked up with a crane and loaded onto a flatbed.
It has a contactable submesh, contacters and 4 ropables in the bottom and weighs about 1 ton.
No fancy stuff or anything...What you see, is what you get.
I uploaded this to the forums quite some time ago and now decided to upload it here.
Discuss here |
| |
|
|
|
 No Comments yet. Add some here.
|
|
|
This is a skibox which can be attached to both tourliner versions.
The README.pdf is included in the zip.
Please post any problems and discuss here: NEOPLAN-tourliner
Unfortunately I made a silly mistake, so RoR displays ;V 1.0 in the select menu instead of the name of the box... You can cin a fix for that in the fist post of the thread you find above.
Thanks for your appreciation!
Enjoy! |
| |
|
|
|
No Comments yet. Add some here.
|
|
|
Huge LEGO 2x4 bricks made by Brickman
made contactable by Dennis-W
and fixed selectable colors by 1crash007
There is 7 colors to choose from and they are stackable.
The more bricks next to each other will decrease the FPS due to the contactable submesh.
Place a hook in the middle of the brick to lift it up evenly.
Have fun : ) |
| |
|
|
|
One Comment, add comments here.
|
|
|
Here is a large I-beam load. It weighs at 12 tons. It can be loaded on a flatbed trailer and hauled to a construction site. It is also contactable so cars with a contactable submesh will be crushed by the beam.
'Feel free to retexture it, resize, make it smaller longer bigger or shorter. You don't need my permission for this creation.
Have fun  |
| |
|
|
|
2 Comments, add comments here.
|
|
|
Here is a Flat screen TV that you can load into the back of a pickup truck. It is contactable to vehicles that have a contactable submesh.
Included is a template to add your own image to the TV screen. |
| |
|
|
|
5 Comments, add comments here.
|
(updated on 31/8/11)
|
WOODEN CRATE PACK
This is a pack of wooden crates. I have attempted to make them sort of high-detail and I think I have succeeded for the most part. There are many variations inside, so look at the list below. In the future I am willing to make more requests for different versions. These crates have a 'hooking point' for cranes and also have 'ropables' so you can fasten them to other vehicles. They also include a submesh so they can be contactive with other submeshes/contactive structures. They emit really good framerate because of the simply-low node/beam count. They can be used in groups without affecting your framerate heavily. There are many versions, too.
Normal (OSB)
IKEA
THW
UN (UNHCR)
U.S. Army
TNT Crate
Radioactive biohazard
DHL Express
Soviet Crate
CREDITS
Beolex - 3D Modeling/nodes & beams/texturing
Venem - Assisting with beam color
DISCUSS |
| |
|
|
|
|
5 Comments, add comments here.
|
(updated on 22/11/11)
|
DESTRUCTIBLE BARRICADE
In a game where approximately 99.9% of the players like to see things get destroyed, mauled, smashed, torn to shreds, incinerated, devastated, set on fire, and blown up, a load like this is more than necessary. Oxsergy and I (Beolex) bring you the Destructible Barricade. This is a meshed load which makes a good backdrop as scenery to your terrain, or just eye-candy for you masochistic freaks that like seeing things get destroyed. It is a tri-section load, meaning it has two legs and a board that can all rip apart for your disastrous pleasures. It is recommended that you pre-place it on a terrain so it is permanently there whenever you run the game, but it is also lift-able (via crane/boom) and can be placed in the bed of a vehicle and secured, too. However, to keep this barricade realistic, it needed to be semi-weak so it can be destroyed by most moving forces. As a result, hauling/lifting this with machinery can result in the barricade breaking, as it is fragile.
CREDITS
Beolex - Mesh creation and texture work
0xsergy - N/B structure and refinement/finalization
DISCUSS
|
| |
|
|
|
11 Comments, add comments here.
|
(updated on 3/9/11)
|
This is a simple 3 person man-bucket. The weight is 300kg.
Color of the bucket can be changed by editing the file 'Manbucket-color.png'
|
| |
|
|
|
One Comment, add comments here.
|
(updated on 23/10/11)
|
This is my new lifting equipment for lifting a concrete floor.
The lifting frame will automatically attach to the floor when they are close togheter!The floor can be detached with CTRL+ALT+F9/10. Be sure that your crane has forwardcommands otherwise this won't work!
Having any trouble?
Problem thread!
Unhooking will not work on the Sennebogen unless you did add forwardcommands!
Credits:
Lifter - helped with triggers
Rotexx - beta testing |
| |
|
|
|
3 Comments, add comments here.
|
|
|
A simple basket attachment for the Manitou 731 telehandler.
It has flexbodies chain that bounce around.
Installation:
Simply put the whole archive in the pack folder.
use the manitou thread for comments & questions |
| |
|
|
|
6 Comments, add comments here.
|
|
|
Transportable traffic lights for construction sceneries.
The pack contains two traffic lights, spawn one of each of them to have correctly alternating red and green lights.
They are transportable and can be lifted with cranes.
For modifications ask for permission first. |
| |
|
|
|
One Comment, add comments here.
|
|
|
Hello,
Today, me and Brickman bring you a generator load, the RORGEN GX70000. It is simply a mesh placed on a n/b chassis.
Features:
-Engine, for realism.
-Ropables, so you can pick it up with a crane.
-Contactable, so you can place it in a truck bed or on a trailer.
-Exhaust, for realism.
-Full-Mesh
-It also features a large wheel on the inside (viewable by pressing the "K" key), which spins faster as the engine RPM increases .
We are hoping to release updates and/or new models under the RORGEN name, so stay tuned!
Credits:
Me (ROR-EMS): Mesh, idea
Brickman: All N/B work, Engine, Mesh help.
Feedback is always welcome!
Note: If you want to use the n/b, mesh, or any components of this project in a mod of your own, please request permission from me first, and I will either grant/decline you permission for the parts of this project I am responsible for, or I will forward you to Brickman, for the parts he is responsible for. |
| |
|
|
|
3 Comments, add comments here.
|
(updated on 25/2/12)
|
Atlas class tug & unpropelled barges
by Redeye
This pack includes the 'Atlas' class tugboat for Rigs of Rods (version 0.38.67) and 3 different unpropelled barges designed to work with the tug.
The Atlas tug features:
- Nav Lights (Ctrl+1)
- A pair of rear hooks (F9/F10) designed to link to the barges (L).
- A main hook (F11/F12) that can link to most other loads or boats (also L).
- 4 skins
- Works with the .skinzip system
The barges feature:
- An empty generic barge (100 tons)
- A loaded bulk barge (425 tons)
- A liquid goods barge (300 tons)
- Pairs of hooks on each end (F1/F2 and F3/F4) that can link to the tug or other barges
- If two barges are lined up and close enough to one another, they will link automatically (Alt+L to unlink)
FIX
Liquid goods barges wouldn't link to one another. If you downloaded before this fix, please replace your old Atlas-n-barges folder with this one. Sorry for the inconvenience.
Here's a quick tutorial of how to best dock the tug with a barge:
- Spawn a barge and an Atlas tug and line up with a barge. That should get you used to the tug's controls. Keep an easy hand on the steering wheel, she's slightly nervous.
- Extend your rear hooks a bit (F10), that'll make things easier. Not too much though.
- Add some reverse throttle and back up towards the barge slowly and carefully. Keep an easy hand on the throttle.
- If you're really close to the barge (and still lined up), bring the tug to a halt. Once stopped, hit "L" and wait for the ropes to link up.
- Now extend your rear hooks further for some safety margin between the Atlas and the barge. Congratulations, you're ready to go.
If you want to release a mod of the Atlas or barges, follow 2 simple rules:
- Credit the original author (or authors, if you're modding a mod)
- NO conflicts with the original version! Change all material names, mesh names, texture names, give it an all-new UID and GUID.
If you just want to make a skin for the Atlas or barges, make a *.skinzip. After all, that's precisely what the system was designed for. The good news is you won't have to worry about conflicts with the original.
Have fun!
Redeye |
| |
|
|
|
7 Comments, add comments here.
|
(updated on 25/9/11)
|
Hi Heavy Duty Fans
I present my new load - an 12 tons corn / pellet silo
I created with SketchUp - the n/b work has "will1984" made??. My ROR editor not works 
thank you "Will" for the work 
UPDATE!!!
thanks to Brickman to make the Silo contactable |
| |
| Average Rating: |   | Tags: | Terex, Demag, Liebherr, Other Loads, Loads, Other Cranes, Mobile Cranes, Tower Cranes, Cranes, Heavy Machinery |
Downloads today: 3, all time: 3600 |
|
|
6 Comments, add comments here.
|
(updated on 25/9/11)
|
Hi,
this is my New Load - is a 280 To Press Part-
You need to lift the press at least two cranes of 500 tons Class
I've created the press in SketchUp, and Craneman has the n / b work done. my ROR Editor not works
Thanks craneman for the good work! |
| |
| Average Rating: | | Tags: | Terex, Demag, Liebherr, Other Loads, Loads, Other Cranes, Mobile Cranes, Tower Cranes, Cranes, Heavy Machinery |
Downloads today: 2, all time: 3096 |
|
|
5 Comments, add comments here.
|
|
|
300 To Kolonne Load
N/B by Jo_Vink - Thanks for your Work!
you need at least 2xac500 , or the new comming soon crawler crane |
| |
|
|
|
3 Comments, add comments here.
|
|
|
This is a simple Bridge Load i doodled in Sketchup in about 20mins. So dont expect a perfect mesh.
It has four ropables ontop so you can lift it.
Expect it to swing around a bit, since the weight is added at the outer nodes.
It should weigh around 30 tons.
If you like it, i might make more loads in the future.
Enjoy. |
| |
|
|
|
10 Comments, add comments here.
|
|
|
This is a simple Tower Load i doodled in Sketchup in about 20mins. So dont expect a perfect mesh.
It has four ropables ontop so you can lift it.
Expect it to swing around a bit, since the weight is added at the outer nodes.
It should weigh around 30 tons.
If you like it, i might make more loads in the future.
Enjoy. |
| |
|
|
|
3 Comments, add comments here.
|
(updated on 1/7/11)
|
A cable bridge 2900m long ( including ramps) and 217m height .
I have update the road of the bridge. see top pic |
| |
| Average Rating: |  | Tags: | Other Loads |
Downloads today: 0, all time: 1313 |
|
|
6 Comments, add comments here.
|
|
|
the bridge is a base of the confederation bridge in canada.
It is 1km long (in real 14km ) and between 40 60 m heigh .
You can drive (in real only walk ) in the bridge, it is hollow.
The bridge is not complete ,you have only lift the brigdesections on the pillar,they are 200m long and weight 25t (in real 8000t )
I have made the bridge sections so light, it's now easy to lift with a high crane ( min 100m heigh ).
The ties on brigdesections are so long for stability.
IT DON,T WORK IN 0.37
MANUAL
1 first lift the brigdesection near a ramp so you can see the right position
2 Lift the triangle belowe the brigdesection over the top of the pillar.
3 Each side of the brigdesection must be higher than the near the brigdesection (when lower, the invisable surfaces don,t work)
4Llower the brigdesection about in the right position.
5 When it lean on the pillar ,you can pull (slowly) it, with the left mouse bottum on the right position .
In the right position it lock automatically.
IMPORTANT
to spawn the bridge in your flatmap, place these text in your flatmap.zip , in file f4afUID-flat_map_full32xa.terrn under name loads.
V
2828, 100, 2050, 0, 0, 0, load bridgesection.load
2428, 100, 2080, 0,180, 0, load bridgesection2.load
2428, 100, 2050, 0, 0, 0, load bridgesection.load
2228, 100, 2080, 0, 0, 0, load bridgesection2.load
2028, 100, 2050, 0, 0, 0, load bridgesection.load
2829, 0, 2057.2, 0, 0, 0, load ramp.load
2738, 0, 2060, 0, 0, 0, load pillar1.load
2538, 0, 2060, 0, 0, 0, load pillar2.load
2338, 0, 2060, 0, 0, 0, load pillarhigh.load
2138, 0, 2060, 0, 0, 0, load pillar2.load
1938, 0, 2060, 0, 0, 0, load pillar1.load
1828.5, 0, 2068.3, 0, 180, 0, load ramp.load |
| |
| Average Rating: | | Tags: | Other Loads |
Downloads today: 0, all time: 2133 |
|
|
3 Comments, add comments here.
|
|
|
Hi, I´ve made a log chains, that will allow three attach points insted one.
I´ll put some exemplificative pictures. |
| |
| Average Rating: | | Tags: | Other Loads |
Downloads today: 3, all time: 1958 |
|
|
4 Comments, add comments here.
|
|
Repository Home
Manage your files
Statistics
CDN overview
a49a4UID-outhouse.zip
view details
(gold)
(silver)
(bronze)
