This my Goldhofer STNL3-Platform trailer "Speedy".
"Speedy" is a very flexible and light platform trailer.
Commands:
CTRL+ALT+F1/+F2: lower/raise trailer legs
CTRL+ALT+F3/+F4: lock/unlock steering (lock for reverse driving or extending trailer/steering is locked when trailer spawnes)
CTRL+ALT+F5/+F6: extend trailer
CTRL+ALT+F7/+F8: raise/lower liftaxle
CTRL+ALT+F9/+F10: raise/lower trailer ramps
Note: All commads exept ramps are one-press-commands.
Hope you like it :-)
Here's a trailer I made awhile back with a detaching Neck. It can haul some big stuff, has a flexbody deck that bends flat with a heavy load and flexes over bumps. Its not all that finished, but its as finished as its gonna get, lol. I made a video to show how to use it
Ctrl F1 to raise the neck so you can back under and lock on
Ctrl F2 seats the neck on the hitch after you locked on
Ctrl F3 attaches neck to the trailer
Ctrl F4 detaches neck so you can drive it out of the way to load/unload
second upload to the repository another skin for my company rormart this skin is for the Ekeri trailer for 6x2 Scania R560 that kuru made to install it you just put the DDS file in to your ekeri.zip and you done!
A telecopic trailer based on OVB-55-03V(T) model from Nooteboom.
features and commands:
- can extend up to 40m (CTRL+F1/F2)
- manual steering (F7/F8)
- adjutable suspension (CTRL+F3...F8)
- drop sides, to prevent falling loads (CTRL+F9/F10)
- fully working ligths
- avaible in 3 colors: red/yellow/blue
All commands are written on the front left side of the trailer
this is a tandem axle fully enclosed trailer,
its optimized to carry about 3.5t.
commands are
ctrl+f1/f2 trailer jack up/down.
ctrl+f3/f4 fold trailer jack back/forth.
ctrl+f5/f6 open rear tail gate.
Ackermann Moving Trailers
Here are my moving trailers for both the Buessing and the Mercedes Moving Vans.
They have managed materials and material-flares, and are useing sections.
They're not loadable... just some nice trailers to pull around.
These are an update to Aperion's logs he made back in 2007. These are uploaded with permission.New: New Texture, with a bark texture (not debarked) New Weight (2T, 5T, 10T) DOES NOT OVERWRITE OLD LOGS.
Pull the trailer next to the load so the rear part is at the right place.
Disconnect the rear part with F11 and pull the front part to the front attachment point.
Use a crane to put the load on, the wood load also has invisible legs so it can be loaded without crane, use F9/10.
The steering strength can be adjusted with F5/6 to fit to the length of the load.
The rear part has manual steering for special situations: F7/8, don't use when the steering is already at maximum angle!
The legs fold in automatically if you pull them up with F1, hold F2 until they fully fold out.
The load will attach on the trailer automatically once it is close enough to the right position.
To unload push F12, but attach it to a crane first and put enough tension until the trailer almost lifts off!
Thanks to Lifter for the hookgroups and triggers and for support with this project!
Thanks to fidoj for his roof part load!
Please do not modify this without my permission,
skins can be added using the skin file system: skins-working
If this system is used properly then no need for my permission for skins.
Kenworth Transfer Dump Truck
A transfer dump truck inspired by a request on the forum.
Credits go to Box5Diesel for his Kenworth truck.
For information on how the system works see the request and showrooms thread.
Feel free to modify, but use a different unique id to make it not conflicting with my truck.
Skins for Box5diesels Kenworth should work on this truck, but I'm not sure.
I've fixed a little bug with the material of the trailer dump box.
Here is a skin for the Kenworth T600 and a 2 axle tanker trailer. The skin is based off of fuel delivery trucks for HESS gas stations. I made the skin as close to the actual paint job as possible.
Credits:
Kenworth T600 - HemiBoy95 & Box5Diesel
Tanker Trailer - Trevor
Inspiration - My father
Skins - Venem (me)
version 5, 4x4 trailer & jeep trailer
there is an invisible leg to lift the front to lift it
press+hold F2, hit ' L',once its attached press F1 for a few seconds to retract the leg.
Transportable traffic lights for construction sceneries.
The pack contains two traffic lights, spawn one of each of them to have correctly alternating red and green lights.
They are transportable and can be lifted with cranes.
Here is a large I-beam load. It weighs at 12 tons. It can be loaded on a flatbed trailer and hauled to a construction site. It is also contactable so cars with a contactable submesh will be crushed by the beam.
'Feel free to retexture it, resize, make it smaller longer bigger or shorter. You don't need my permission for this creation.
second upload to the repository another skin for my company rormart this skin is for the Ekeri trailer for 6x2 Scania R560 that kuru made to install it you just put the DDS file in to your ekeri.zip and you done!
This is a modular house often used on constructions site or as a modular office. It is a simpel mod of the 20ft container by LostSoul3471. I added 4 more hock nodes, this will not efect how the container forklifts handles it, but make it easier to lift it with cranes. I also made it lighter than the original container. you can stack them on each other. It is fully independent and will not overwrite the original containers. It is still a beta.
37.00-R57 tire from a Komatsu 730E-7, load weight 4000kg, usable as a chock for other loads or to load onto a trailer for transport or to roll down a hill for a laugh.
if you wanna use it for something else add my name with it or at least send me a message.
this is a mystery load, its contactable and has 4 rope able nodes so u can load it onto a trailer,
there is nothing under the curtain so look all you want.
it weighs 9000kg in total.
this is the ekeri trailer(full file) which i now has skinned over to be a scandinavian nor-cargo trailer
*all credits to the original author*
if you are going to do changes in the skin, let me know!
this is my modification to Box5diesel's sledpull
I added an engine an other skin and a beacon
credits: Box5diesel for the original sledpull
and me ( jerom ) for the modification's
This is a skibox which can be attached to both tourliner versions.
The README.pdf is included in the zip.
Please post any problems and discuss here: NEOPLAN-tourliner
Unfortunately I made a silly mistake, so RoR displays ;V 1.0 in the select menu instead of the name of the box... You can cin a fix for that in the fist post of the thread you find above.
this is canal boat, this contain 2 versions a newish one and a old one, these are just loads for transport and i cannot guarantee they will float properly and they have no propulsion system.
if you wish to use these loads for anything else please add me name and or at least contact me.
Repository Home
Manage your files
Statistics
CDN overview
goldhofer_stnl3.zip
view details
(gold)
(silver)
(bronze)
