Well here it is. The official release of my not-so-official FJ cruiser.
I worked nonstop on this car for a year and a half, and gave up about 6 months ago due to just loss of interest.
I had been talking to some friends recently on the forum who said they would really like to see it tidied up
and released. I dont exactly have some long drawn out story about how it got to where it is. It was really just
a huge learning experience. but finally decided to let it go because I lost all of the original files to the mesh. [read more]
Melroe M-880 Prime Mover
This is a prime mover for real heavy loads build out of a former wheeled skid-steer dozer. Like the real thing it does not have any suspension but a lot of power ;-) .
My RoR model features some animated parts like the cooling fans and levers inside the cab as well as some custom sounds.
Mesh and N/B all by me, please do not upload any mods without my permission, thanks :-) .
ZIL-135 BM-27 Uragan 9P140 launch vehicle and ZIL-135 bare chassis version
UPDATE 2:
- if you downloaded before 2011. december 21. 19:00 GMT (or anytime before this note appearing) please REDOWNLOAD. Otherwise you either won't have the fifth wheel version at all, or the one with bugged wheels. Sorry for the inconvenience.
Credits first of all to Box5diesel for his 1stgens
These do not replace any originals.
Three new meshes for you to have fun with.
Install instructions: For .36 put it into the documents rigsofrods packs folder
For .35 unzip original 1stgen and then unzip this one into trucks folder [read more]
Terrain description:
This is a desert island, it has no roads but tracks are marked with washed-up logs. There is a few very small settlements dotted around the island.
You start on a peninsula in the midde of the bay and drive across the sunken bridges to get to the island.
You'll need a decent offroad car as there's a section where the track dips underwater, and quite a few large mounds in the roads (where I didn't quite do the heightmap right lol) [read more]
Here is a skin for the Kenworth T600 and a 2 axle tanker trailer. The skin is based off of fuel delivery trucks for HESS gas stations. I made the skin as close to the actual paint job as possible.
This is an 8x8 Offroader based on a MAN-TGA chassis.
It is made for offroading so don't expect it to handle well at high speed.
However, I tried to keep it as highspeed-friendly as possible.
But the main aim is to perform well in rough terrain.
In the readme, there are instructions on how to enable the enclosed wheel meshes.
A pack of flatcars (standart 40ft, bulkhead 40ft and heavy weight 8-axle), all come with different skins.
The couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
Known bugs:
If you enter a flatcar through the vehicle selection menu game will crash if you try to exit the flatcar, simply change into another enterable vehicle via the menu and exit there. [read more]
A Dutch skin for the Mercedes Atego Metz aerial firetruck.
It's a skin based on the Mercedes Atego from the fire department of Middelburg, Zeeland in the Netherlands.
I have tried to make it as real as possible, but because this firetruck is an older Mercedes Atego version than the one in use by the firedept. I could not exactly reskin all parts correctly.
its verry heavy around the 75 tons you can tow alot of vehicles whit it
the controls are in the game by pressing the T.
it use wheels on the frontwheels, wheels2 on the rearwheels. For more grip you can use [ and ] to lower the tire presure of the rear wheels
Included in the pack are 13 versions, 3 Stock Carts, 3 Offroad Carts, 3 Racing Carts,1 Driving Range Cart, 1 Supra Cart, 1 Hummer HX Cart, and 1 Apocalyptic themed golf cart.
All carts are fully meshed, collidable, have fully functioning interiors with gauges and steering wheels, adjustable hitches, and 4 interior cameras plus some other things I may have forgotten to mention.
ok heres an update of my halftrack project still in the process of building so expect more updates
The pack includes the updated cabover and the M3 halftrack, Commands F3 and F4 to help with the turning radius 1942-Half-Track for any comments or questions you may have
If you have the first zip you will need to delete it
Credit goes to me, this is my first pack so please let me know what you think
This is an skin for Lenni's Man TGS 32.350 LTF 1060 Crane Truck.
I've skinned it to an "Feuerwehr Kran" With the marking 'KW-065'
This is an fictional skin loosely based off real german fire apparatus.
These are re skinned trevors peterbilt 359s made to look like western star trucks. i am the skinner to a point, the skull on the side is part of a skin by "marco" so he gets credit for the skins also. i added all the rest. have fun.
Credit- Trevor- Trucks
-Platerpants"me"- skins
-Marco- skulls on skins
This is an essentially imaginary truck made from scratch. I've tried to base it loosely on trucks from the 1930's and 40's but its unique. It has meshwheels, a contactable bed and i've tried to give it as close to real handling as i could. Yes its huge but my sketchup ogre exporter stopped working so i cant resize it.
Credits go to: Fordfan for the chassis and me for the mesh and chassis tweaks.
UPDATE: I've been working on a variation of my own and it's complete, or close enough. It is fully submeshed and will contact with other vehicles(that must to be contactable). It's sides and tail can fold down. The rear rollcage can be lifted using Ctrl+F4/Ctrl+F6. It has ties in the back so you can drive an vehicle into it. Unfortunately all the stuff I added makes it too "tippy" to carry a vehicle into water anymore but driving on land is fine. Also has a trailer hitch that can be completely folded away if you're not going to use it. All controls are listed in-game. Have fun.
This is an Tatra 813 pack I modified from Pricordes original versions and added "Wheels2" to all of the models so you can inflate/deflate the tires. Also updated to work properly in the latest RoRs release as it was having texture issues before. Use [ to deflate and ] to inflate the tires. This is not as easy on your system as the originals were. They were only about 1300 beams before, now each has over 2800 to properly simulate the wheels.
NOTE: You will need to enable advanced wheels in the configurator under the "CPU" tab to enable "Wheels2" in versions older than 0.38.33.
This is the finished version of the ERF EC14 Wrecker & Loader that i started many months ago.
It has new UID's so they are standalone to any other version's of these vehicle's.
I have added a winch to the boom now so it is easier to rescue cars. If you find any problems or have any suggestions please post them in the discussion (Link below).
As with the numberplates bieng English i have done them to be realistic & are from the Prefix era. With the 1st letter meaning the trucks age in this case. These ERF's are M reg' so are from 1 AUG 1994 to 31 JUL 1995. http://www.number-plates-car-registr...ion_years.html [read more]
this is just a slightly modded version of 1CHEVROLET1's F650 Crawler. all i did was made it have ner rims and made it a little faster. it is also my first mod and upload.
Starling 911, this is Starling Engine 1 responding. Yes ladies and gentlemen, I this is my first upload, and I have made a skin for the KME Preditor by Cydvx and Pascal. With Cydvx's permission I am releasing it. Now mind you this is a Standalone skin, Instructions are in the zipfile. they should help you.
Credit: Cydvx and Pascal for the original KME and Blank skin
Milan42 (me) for the Starling Engine 1 skin. Hope you like it.
This is a chevron skin for the international 4700 & tanker trailer by trevor. simply replace the original files with the files in the pack and there you go. enjoy!
This is the dumper-version of my Mercedes Kurzhauber. Everything is made by me. Its ropable, so you could also carry it.
Its a bad frameeater, but you can deactivate the mirrors and the mesh-wheels if you ve poor framerates.
Its not already done, but for the moment its some nice stuff i think.
you can connect trailers to the front- and the back-hook
Hello! This is my second vehicle release. It is another GTA Ammunation vehicle.
Did you not like the slowness and large amount of weight of the GTA Ammunation Truck?
Then you need the GTA Ammunation Astro!
This vehicle is not in GTA, it's just a custom.
It goes over 140 mph so I don't know the speed, but its fast.
Hydraulics: [read more]
thanks to grayson k 95 for the help and thanks to him for letting me skin it this is the ce300 mod orig by grayson it has baldwin havens and original files only i will update it tomorrow or whenever with more skins all credit goes to graysonk95 and 1 % goes to me skinning
This is my first upload to RoR, it is the AmmuNation truck from Grand Theft Auto: Chinatown Wars.
Thank you to Turbocharger for the Chevy!
I made the skin.
WARNING!
If you have light source effects to 'All vehicles, All lights' YOU WILL LAG WHEN USING HEADLIGHTS! The turn signals are fine though.
Box5Deuce.zip
view details
Gold
Silver
Bronze
