Features:
- meshes made with great care and attention to detail
- animated suspension (includes leaf springs and shocks)
- animated steering link
- animated drive shafts (no they dont rotate. just flex with the suspension)
- detailed meshwheels and rims
- custom sounds (includes jeep starter and engine sounds and a custom crash sound: warning these are 'eh' in terms of quality. i know no one thats owns a jeep. and had to record off the internet. google video FTW!)
somwhat of an interior (made to look good from drivers perspective. and from outside looking into the windows) which includes
- working dashboard gauges
- working steering wheel ( yes its a new steering wheel in an old jeep. i like it better then the old ones)
- custom jeep seats
- flares (headlights, brake lights, blinkers and reverse lights)
- comes with all the 0.36 goodies including
- specular textures (real world reflections)
- damage texture
- antena bounces around and bends wile driving.
A set of standard shipping containers--both 20ft and 40ft.
Features:
- Fully stackable and stable to at least 3 high.
- Ropable at each corner both top and bottom
- Contacter points enable interlocking stacks
Updated:
- Added several skins in carousel format for selection
- Fixed 40ft containers to work with reach stacker and isoloader. (16 total ropable points both top and bottom)
Place in Vehicles folder in your My Docs section.
Replace the original v1.0 with this one.
Special thanks go to Lenni for his help in getting them to stack right. Tommylommykins for the layout based on his 45ft box trailer.
Here is a skin for the Kenworth T600 and a 2 axle tanker trailer. The skin is based off of fuel delivery trucks for HESS gas stations. I made the skin as close to the actual paint job as possible.
Credits:
Kenworth T600 - HemiBoy95 & Box5Diesel
Tanker Trailer - Trevor
Inspiration - My father
Skins - Venem (me)
Originally started by Aperion, i continued anf finished it to a working state. then i updated it to a working order for RoR 0.32.
It starts like a plane, with four engines, it has fins at the rear to help with down force. I would advise using this before making any adjustments to direction or braking.
Well, You may of seen it in the Random Screens or Development Screens, And it does lift stuff up!
It will lift anything that realistically will fit, Such as small cars or upper sized trucks.
Thatsnice designed the mesh, So I am not aware of the model.
F1/F2 - Raise/Lower the platform
Credits
IRC Dwellers - For the idea
Sushi - Node and Beam
Thatsnice - Meshes, "Fine tuning"
You are free to modify it, please just Notify me and Thatsnice.
This is my first upload.
A fixed version of the Komatsu someone build for a long while, it was made by Solid_Granite, but i dont know if he wants some perms?!
I fixed the problem with the front axle the wheelbounce and the size, also the mass and power.
Know bugs are the front suspension is too soft an dthe tires need more numrays and they are to soft.
I hope youll like it, if there are any bugs pls tell me.
For Solid_Granite: Thanks for this wonderful dumptruck, can you help me with the singleplayer spawnposition?
How to install: Extract the files into your data trucks.
How to drive: Dont turn faster than 40kph, cuz of the suspension.
Max. speed is over 100kph
Dont drive to fast over hills, cuz of the soft tires
I think all credits goes to Solid_Granite. If someone wants to help me pls send your fixes first(email in profile).
Here is my new Rofan ZD4 Tug.
Features:
-meshed body
-interior
-managed material flares
-working switches inside cab
-gauges etc. inside cab and working steeringwheel (finally it moves into the correct direction; thanks to Lenni for help)
Thanks to Sushi, who allowed me to use some values for engine and shocks.
Here is a Beetle Pack. It has the original beetle by SolidGranite and my crawler version. The original is untouched. The crawler has some very twisty suspension. It also has 4 wheel steering so it's not road friendly, at all. Credits go to:
SolidGranite for the awesome car to build upon.
CrazyJoe for thw Rims,
Kitteh, for his wheel band
jakebecwar (me) for the suspension mod's and putting it all together. I also added headlights! Have fun and I hope you enjoy! Put in My Doc/RoR/Vehicles or Packs.
This amplirollpack consists out of one flatbed load and one ampliroll with a generator on it. The generator has an engine so there is smoke (I suggest slamming it into 3rd gear going full-throtle and pressing enter to get out the smoke will continue while your not in there).
Note: This is not some kind of mod, it is build from scratch by me and only me.
A jersey Barrier. One of those cement barriers that divide highways.
Has three hook points. two are for my excavator when it gets released and the other is for a crane.
Fully contactable. you can load it and even drive over it.
Not very Hard on fps.
Lots of fun to play with.
An updated version of Mr X's Peel P50, I have added sounds, touched up some textures, packed the whole bonus pack, released shortly after the original release, together in this file. There are 2 police cars, both have their own custom sirens.
The SFPD cop car I made is included in the pack, as well as the Crane version with a custom paintjob.
The race versions have a 9 HP pull-cord ignition Go-Kart engine making it fast enough to add a lot of oomph to the small car.
The normal road versions (including police, crane and tank) have a 50cc Vespa engine, while the starter sound is from my father's BMW F650 GS motorcycle.
Credits go to
Mr X for the vehicle
Zipppy (me) for sounds and texture touch ups
McReed for the tank version
Aivar for the camera fix
*****NOTE: Most features will not work in 0.35, only the camera fix and texture updates will.*****
If a previous version is installed, please remove it, as this may conflict.
Installation on 0.36 and above, is by saving the .zip archive to "My Documents/Rigs of Rods/packs"
Installation on 0.35 is by either extracting the files to "Rigs of Rods 0.35/data/trucks" or by saving the archive to "Rigs of Rods 0.35/packs"
The images taken had a lighting bloom mod active, in case anyone wonders.
This is a reskinned, redone dodge charger. I have made a new damage texture which is pretty real-looking. This car includes a glossy lime green paintjob
with the classic stripe on the back. This is Bonehead's dodge charger that was modded by Slowride, and then redone by me. Enjoy the car!
*CREDITS*
Bonehead- the car
Slowride-mods
GTR34 (me) - redoing Slowride's mod charger (which by the way is awesome)
Mobile Hospital reskin of BigBoy's Buessing Burgloewe UM Moving Van. Released with permission. Used as a mobile emergency room for large incidents. I upgraded the brakes to make driving it survivable but left the power as is. It is a huge vehicle so it's not a speedster.
Version 2 of the Jeep and Traffic Control Trailer. I have redone the skin thanks to Adeodats recoordinating of the texture. I also slightly moved the position of the trailers flares so that the arrow looks a bit cleaner. Well, to me at least.
*EDIT* Some people seem to be having problems so let me state:
PUT THE WHOLE ZIP FILE INTO THE PACKS FOLDER OF YOUR ROR 0.32 DIRECTORY.
The trailer shares the texture of the Jeep, so if you only install the trailer, your game will not work.
International 4300 DuraStar Wrecker-FIXED VERSION
this is a great wrecker, it can do almost any job
flashers: ctrl 1, ctrl 2,ctrl 3, ctrl 4, ctrl 6
Commands
f1,f2: main boom
f3,f4:second boom
f5-f8: wheelift
f9-f12:winches
ctrl f1, ctrl f2: legs(hidden)
Credits
Base truck: box5diesel
wrecker: me
flares: qer ,me(mostly qer)
meshes:aivar(boom,wheellift), 1crash007(body), Me(hooks)
support: qer, aivar
lightbar:dodge0359a
Thanks to all who helped on this wrecker!
Hello, For those of you who liked my last upload, and I mean you, urmysin, you will LOVE this one, It's a pack of rock crawlers... which you can feel free to modify without my permision, 'cause I only MODDED theese, and did not make them. This pack contains:
1. a hummer crawler mod.
2. an F-350 rock crawling mod, original f350 was made by Matt3865, sorry about the confusion
And lastly, a trophy truck mod, with ONLY softer/widened suspension. Oh, Yeah! i raised it too. (the original was made by box5, as I am a HUGE fan!)
TREAT THEM LIKE CRAWLERS, NOT BAJA RACERS! I.E; GO SLOW, DOOFUS!!
The hummer and the F-350 ARE a WIP, work in progress, so, Don't come crying when one of the explodes into a million pieces, or looses a wheel... :-)
P.S. the second pic is SUPPOSED to be the hummer...
eact_addon_0.5.ZIP
view details
Gold
Silver
Bronze
