Included in the pack are 13 versions, 3 Stock Carts, 3 Offroad Carts, 3 Racing Carts,1 Driving Range Cart, 1 Supra Cart, 1 Hummer HX Cart, and 1 Apocalyptic themed golf cart.
All carts are fully meshed, collidable, have fully functioning interiors with gauges and steering wheels, adjustable hitches, and 4 interior cameras plus some other things I may have forgotten to mention.
All components of these carts are done completely by me.
Different carts can be selected upon spawning via the selection system (drop down on bottom of spawn menu).
Compatibility:
0.35 unconfirmed
0.36 does not work(confirmed by mywolfman)
0.37 works (confirmed by me)
0.38 works (confirmed by me)
0.39 works (confirmed by PsychoDog)
0.40 does not work (confirmed by Mythbuster)
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-Fire Engine (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a SMALLER FIRE ENGINE from a village near Marktheim that called "Oberdorf" (MB O'607D)
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-PERSONAL CARRIER (VW T3)
-Tanker Truck (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-Fire Engine (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-COMMAND VEHICLE (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-Fire Engine (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second TANKER TRUCK with WATER CANNON (MB NG 80)
-Fire Engine (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-TANKER TRUCK (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-Fire Engine (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-Fire Engine (MB NG 80)
-Equipment Vehicle (MB NG 80)
-LADDER TRUCK (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-FIRE ENGINE (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
My new crawler.
i called it Beams Glory beacose i think it turned out very nice using only beams, and this car glorefies the "old school" beams.
to get the colors correct you will need to extract the material file i included in the truck's zip into the materials zip in resources folder that can be found in the main RoR folder (not the one with all your addons).
the reason i modefied this mat file and didnt created a mat file for the truck is so i can paint my truck's beams fast and easy with so standart colors i created. take a look in the file to see what other colors i made and add you own.
To Modders:
If you ask permission, I'm fine with it. What I don't need is numerous, random mods made of my content without me being aware of their existence.
Important:
The steering looks like it breaks. It doesn't. That is how it was designed.
It is 10MB because of massive jpg files for textures.
This is a Ladder Truck from the fire department Hamburg.
Build in 1995 from Mercedes Benz and Metz.
I has experimented with the slide node system and it works very well.
The command list can be opened by pressing button "T" and the ladder can be secured by pressing button "O".
The node/beam chassis and the meshes are made by me.
A seriously big truck with beefed up wheels and redneck liftkit.
Open/locked differentials and a springy suspension should get you to most places.
Just don't expect quick laptimes!
credits to
Bonehead for the N/B and Mesh
zikmester96 for the sounds
and me for the rework and the cockpit animations and some other stuff
MARS-Craft MX01 Proto
and
MARS-Craft MX01 Proto light
and
every Version (like Polcie and Mars...)
Some general information
Length : 6,32 m
Height : 2,50 m
Width : 4,20 m
Weight : 7,88 T
Engine : Dual V8 with 500 HP
Category : Extrem Terrain Vehicle / Exploration
needed Gravity : adjustable
Max Speed : 30 kp/h
This is My first vehicle in Rigs of Rods
everything is made by me
(texture,mesh,sound,N/B)
F1/F2 = turning
all the other functions you can see in T-Screen
If you want leave a feedback
Thread link : You can get the FPS versions there MARS-Craft-MX01-Proto
this guy is a crawler loosely based off of Shannon Campbell's old competition rig.
this was the first mod i ever made- back when i first joined. i recently added a working light-bar, and meshtires from my G2 suv.
apart from that, everything on it is the same- its very simple and has a few quirks that i dont plan on fixing. it may not be pretty,
but it will go up almost any obstacle with ease. i guess youll enjoy this if you have a slow computer like me: power to the n/b!!!!
features:
automatic rear steering, lockers, and lights.
This is the Mercedes Benz Actros 8x8 pack.
This package includes 8 versions:
- version with no upper part
- ampliroll
- cartransporter (+trailer)
- dumper
- log truck (+trailer NEW!)
- box-truck(+trailer NEW!)
- flatbed (+trailer NEW!)
- trail-truck
This is the Mercedes Benz Actros 6x6 pack.
This package includes 3 versions:
- version with no upper part
- version for hauling
- version with a plateau with a carcrane
It is version 1.2 in english; version 2.0 already planned..
Some slight bugs still exist like the front axle bending when turning.
Pretty good offroad capabilities.
Press "O" when you enter to lock the back door & press it again when the bed is at about 10 degrees
Their is no submesh on the bed yet
Credits:
Kuru for the N/B, Engine, Tool boxes & Fuel tanks
Lenni for the wheels
HRVI for making them
Any questions or what ever PM me or ask on here: Scania-142-Heavy-Hauler-Tipper-(Beta-First-Final-public-release)
Do not release mods without asking me via PM first!
its verry heavy around the 75 tons you can tow alot of vehicles whit it
the controls are in the game by pressing the T.
it use wheels on the frontwheels, wheels2 on the rearwheels. For more grip you can use [ and ] to lower the tire presure of the rear wheels
credits:
eminox/HRVI
kuru
auke1
post here your ideas and questions for an next version
Modifications-
1.> All four suspensions works like a charm... Flexing Good.
2.> 4x4 drive with traction control and lockable differentials.
3.> Weight of vehicle is revised.. CG lowered.
4.> Stable Wheels.
you are free to use it for mods or develop on this.
Just remember to give me credit.
This is my "Löschgruppenfahrzeug 16/12" in english a Fire Engine.
You can open the doors of the cabin and the equipment structure with the F1 to F10 key.
In the back of the truck is a hose reel that you should load up.
So you can move the holder up and down with Ctrl+F1 and Ctrl+F2 and you can change the angle of the hose reel (Ctrl+F3 and Ctrl+F4) so its a little bit easier to hook it up (with "O")
Credits: The truck is copletely made by me (the Fire Extinguisher in the cabin is from the Sketchup Gallery and the wheel texture from RoR)
///Deutsch////
Hier ist mein Löschgruppenfahrzeig 16/12 (LF 16/12)
Man kann die Türen der Kabine sowie des Aufbaus mit den Tasten F1-F10 öffnen.
Die Schlauchhaspel hinter dem Auto kann man anhängen (mit der Taste "O")
dazu kann man die Halterung mit Strg+F1 oder Strg+F2 Hoch und Runter Bewegen.
Den Winkel der Schlauchhaspel kann man mit Strg+F3 und Strg+F4 ändern.
Credits: Das Fahrzeug habe ich bis auf den Feuerlöscher und die Textur der Reifen komplett selbst erstellt
Here is my Mercedes Benz SK B1 1224 THW.
It is based on the 16 TLF from FF_Neustadt where I changed the skin and truck file.
The original truck is from FF_Neustadt [read more]
Authors: sirendude 2011 and various members for support.
This is a pack of all of the vehicles I have made in the past 4 months. All of the cars are N/B only, don't have submesh, and some have no engine tuning.
none of these vehicles float, and one car (siren's auto 12x12 special) has all wheel drive, all wheel steer, working reverse lights, headlights, brakelights, and turn signals (flares). Some vehicles have opening hoods and doors.
Vehicles in this pack:
a 6x6 pickup truck called "mud slinger" (includes a Monster Truck version)
a 4x4 pickup truck simply called "pickup truck"
a few muscle cars/ sportscars (they are "highway terror", "lancia delta N/B Car", "tire burner", and "muscle car")
a school bus
a few offroaders ( they are "rock locker", "redneckrickem's dune buggy" (a YouTuber's buggy), "traxxurator"+"traxxurator dump" and "4x4 offroader")
a motorcycle (it has training wheels for stability :P)
and an engine that uses negative shocks to run, just give it a spin with the mouse and it runs. (be careful it explodes after a certain RPM)
You have the freedom to do whatever you want to these vehicles, but give me credits for the vehicle's N/B.
To open a hood or door, press F1 - F4. These commands do different things like open and close a door or hood.
here he is again the caliber ,because it was not on the repository I've uploaded it again
I've updated him, now he has differentials, Antilock Brakes and Traction Control
this is a heavily modified version of arthur_hucksakes model t.
this is my first mod
it is more controlable. it is 4 wheel drive.
it will go to speeds of 160.
i have slightly mod ified the bode by lengthening the trunk and changed the windsheild.
the ride hight was changed.
the suspension was heavily tuned so now it will go of jumps and go around corners easily.
i have modified the skin and took out the seats also.
UNIMOG 406
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
Disclaimer:
-mods for personal use ok, but don't ask to release your super engine power lift kit mod, or to use the rims/tires on your vehicle to showoff, it ain't gonna happen, yo.
Here is another version of my Ford F-650 I put ford logos on it new rims and a blue strip on the side and that pretty much it. and it won't overwrite the RBP version. It is the same as the RBP truck just skinned differntly. Have fun with it
This is the finished version of the ERF EC14 Wrecker & Loader that i started many months ago.
It has new UID's so they are standalone to any other version's of these vehicle's.
I have added a winch to the boom now so it is easier to rescue cars. If you find any problems or have any suggestions please post them in the discussion (Link below).
As with the numberplates bieng English i have done them to be realistic & are from the Prefix era. With the 1st letter meaning the trucks age in this case. These ERF's are M reg' so are from 1 AUG 1994 to 31 JUL 1995. http://www.number-plates-car-registr...ion_years.html
I have created the engine to be realistic of a derestricted ERF with a top speed of around 90mph. The engine is more powerful just below its max RPM so when it starts to struggle accelerating just change up a gear & it will keep going.
Well here it is. The official release of my not-so-official FJ cruiser.
I worked nonstop on this car for a year and a half, and gave up about 6 months ago due to just loss of interest.
I had been talking to some friends recently on the forum who said they would really like to see it tidied up
and released. I dont exactly have some long drawn out story about how it got to where it is. It was really just
a huge learning experience. but finally decided to let it go because I lost all of the original files to the mesh.
I suck at writing. So heres a list. :|
Everything-me.
pictures to the left- taken an edited by my main man, Ferrettank!
Known problems are as follows:
Missing quite a few meshes. (Mainly suspension pieces)
Interior is incomplete.
No damage.
And there is a material bug with it on Deags Trail Island map. For whatever reason, the tires are yellow. I cant figure it out...
This was my first try at animated props, flex tires, and flares, so it is what it is! Hope you enjoy it.
Also, modding, do as you wish, post pics as you wish. I dont really care. But if you'd like to release any of your mods (and credit me ;D), please ask my permission first.
hi, here is a ford f-650 RBP truck i mainly worked on the front and back of it, i added a RBP grille, RBP diesel performance logo on the hood, RBP logo mud flaps, and RBP rims. All the credit does to the orignal authors. It has good susupension great for crawling and even baja yet hard enough to keep it stable, also large tires and a large which are good for mudding. so this is basically an all terrain ford, have fun with it. P.S the screen shot doesn't do it justice
Functions
All functions work by press once functionality, also winches, so when you press the extend button once, the winch will keep extending, until you press again.
F5-F6 Front Winch
F7-F8 Rear Winch
F9-F10 Doors
F11-F12 Drop sides
W Diff Lockers (Open, Rear Locked, Both Locked)
N Driving lights
Credits:
3D models, textures, N/B, truck -file and custom sounds are
by Masa
A shader script and a material script are by Box5Diesel.
Core beta testers and useful help: Braskus, Gabester, and many other forum members.
Thanks to all beta testers and to everyone else who helped me at the
forums.
thanks to grayson k 95 for the help and thanks to him for letting me skin it this is the ce300 mod orig by grayson it has baldwin havens and original files only i will update it tomorrow or whenever with more skins all credit goes to graysonk95 and 1 % goes to me skinning
UPDATE: I've been working on a variation of my own and it's complete, or close enough. It is fully submeshed and will contact with other vehicles(that must to be contactable). It's sides and tail can fold down. The rear rollcage can be lifted using Ctrl+F4/Ctrl+F6. It has ties in the back so you can drive an vehicle into it. Unfortunately all the stuff I added makes it too "tippy" to carry a vehicle into water anymore but driving on land is fine. Also has a trailer hitch that can be completely folded away if you're not going to use it. All controls are listed in-game. Have fun.
This is an Tatra 813 pack I modified from Pricordes original versions and added "Wheels2" to all of the models so you can inflate/deflate the tires. Also updated to work properly in the latest RoRs release as it was having texture issues before. Use [ to deflate and ] to inflate the tires. This is not as easy on your system as the originals were. They were only about 1300 beams before, now each has over 2800 to properly simulate the wheels.
NOTE: You will need to enable advanced wheels in the configurator under the "CPU" tab to enable "Wheels2" in versions older than 0.38.33.
Please note the credits for the crane go josh (1239) who made the original.
The Volkswagen T3 Van.
You will get some different versions, so you can explore the racetrack as well a deep mud and high mountains.
Versions are:
2WD
Stock Volkswagen T3 van with rear wheel drive. Has a locker in the back for difficult situations like towing a trailer.
2WD Race
A tuned and lowered T3 RWD. It is more light-wight, has a stiffer suspension and a rear locker (split - locked) for a good handling and easy drifts.
4WD Syncro
Stock Volkswagen T3 Syncro with four wheel drive and two lockers (open - rear locked - both locked). It has a special gearbox with a extra low crawler gear and is optionally available with rear wheel steering.
4WD Syncro military
Lifted T3 Syncro with a bit bigger tires and modified bumpers for greater attack angles.
It comes with a camouflage skin to be nearly invisible on Belgium terrain.
Also available with rear wheel steering.
All versions except the race one have a deployable hitch for towing trailers, just attach a camping trailer and go camping
And please don't complain about its boxy look, the real car is as boxy, too.
Commands: press T to see the commands ingame
Rear wheel steering (some versions):
F3 and F4
Hitch:
Press F6 to deploy the hitch from under the car. Use the hitch only when it's deployed!
Press F5 to retract it again.
Update: The Airbrake sound is removed since it doesn't suits a car.
Update 2: - Improved handling and more realistic engine and gearbox settings, now it has realistic power and its real gear ratios.
- New mesh wheels and mesh parts for the race version (from Buttlamo's Vehicle Customization Parts thread).
- New mesh wheels for all syncro versions, big thanks to dmtactical for letting me use the wheels of his Nissan Hardbody.
NOTE:
- This is a project of Silvermanblue and me, so I haven't done all the work. If you like the car, please thank him, too!
- This project is based on a heavily modified highroof van from Trevor, he has full credits for the base chassis.
Credits:
- Mesh wheels (Race version): Cydex
- Air intake, intercooler and exhaust: Beolex
- Mesh wheels (Syncro version): dmtactical
UPDATE
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
UPDATE2
fixed the spelling mistake on the ropables so they all work now
UPDATE 3
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
This is my off-road concept vehicle. It looks somewhat like a hybrid between those "duck tour trucks" and a side by side Atv. Please note that this is as far as i will go on this project, and also the mesh is in the file but it shows up transparent black. I don't know how to fix this. Feel free to modify this in any way conceivable, but you must add my name for the node and beam structure. Also note this is an (off road vehicle) drive slowly---under 45 mph--, otherwise you will destroy the suspension.
feel free to message me with any questions --Ben5---
this is a project i will most probably never Finnish as i started something else instead.
its the 4x4 thing and a custom made crane trailer for it,
the 4x4 thing has 4 wheel steering at low speeds, locked diffs and a steering wheel.
the crane trailer has ropes and a invisible leg, the commands for it are are:
F9-F10 lower and lift the crane boom.
F11-F12 lower lift the invisible foot.
'O' connect load
'L' lock crane trailer to vehicle.
to connect the trailer drive the 4x4thing so the trailers hitch node is above the grease mark on the 4x4 thing and it 'L'
to pick up a load back the crane trailer over it lower it so its with in 1.5m from the object and it 'O' once it connects
and the ropes shorten hit F10 to lift the load of the ground and drive away. reverse order for dropping a load.
the crane trailer is usable on other 5th wheel hitches.
a mod to box5's trophy truck (not on the repo, but a dead thread)
wieghs about 1.43 ish tons
the full fender version has meshwheels off the prerunner
the other version has "stock" higher fps wheels
credits:
box5-original truck
philzila(I think)-meshweels
Brickman-v8 engine mesh
Gabester-burnside sounds
me-general moding
here's the WIP thread wip-trophy-truck
(off to a bad start )
update 1:
flexbodies!
a seat!
beam/node defaults reworked
custom sound (thanks Gabester)
This is a bobtailed 1st generation Dodge Ram 1500 Cummins. It includes two versions. One with a normal, thin rollbar, and (My favorite) one with an extremely overdone rollbar...
CREDITS:
Wheels: RORcat
Original mesh: Box5diesel
Mesh editing, NB editing, rollbars: TTT (Me)
DI-GOLF_CART.zip
view details
)
Gold
Silver
Bronze
