This is a Cushman Industrial Vehicle similar to the Titan series. This is my first truck (besides the tutorial), so please give feedback. It has a custom dash, custom sounds, and is fully sub-meshed. I also tuned the engine best I could to mimic an electric motor, and it is only about 100 kilos away from the real vehicle weight. Mods are welcome, and encouraged, just remember to give credit. Enjoy!
Author: Racer159
Update (v1.1):
-Stiffened the shocks slightly for a better ride. (Still fun though)
-Added two new skins, Red and Blue.
-Reduced stalling when switching gears, or under high load.
-A few other niceties.
Hi! i have recently received permission to release this and I am proud to present you guys with my version of LILGTI and FERRETTANK'S FJ40 . EVERYTHING you see on this truck is from the original truck itself and made by the ORIGINAL authors except for the simex tires and control arms done by me and. I edited the .truck file and some meshes to make everything fit.
PLEASE CHECK FORUM FOR THE LATEST UPDATES! FJ-40-mod
FEATURES:
TRUCK 1 LongJ (truggy)
- stretched body and frame
- 4 link suspension upgrade
- FATALFIE wheel beems
- shock monts for the frame
- large simex tires
TRUCK 2 long normal
i made this to have a more stock look
- larger scale leaf springs
- spring over axle conversion thingy
- slightly smaller simex tires
- weeeew!
alot of thanks to the original authors
lilgti and ferrettank
thanks to fatalfie for his wheel beams!
note.
you may have to move the original truck file for the skins to work but thats it! its pretty stable
UPDATE!
i forgot to include the tuber version all credits go to the same people
fixed window and body placement on the tuber
No more updates
Read!
info: this is an mrt version of the manitou telehandler
features:
stabilizers
4 stage extend-able boom
diff locks
quick coupler
rotatable base
controls:
f1-f2: rotate
f3-f4: raise/lower boom
f5-f6: coupler curl in/out
f7-f8: extend/retract boom sections
f9-f10: attachment commands
f11-f12: center stabilizer (only use if on stable flat ground!)
ctrl-f1-f8: raise/lower stabilizers ( each stabilizer is independant so you can stablise yourself on uneven ground)
ctrl-f9-f12: extend/retract stabilizers
this machine was made to work with the attachments made for the manitou 731
to attach to an attachment just drive up to it slowly as it is set to auto-lock!
weighs roughly 16 tons
credits
i haver permission from voulk to use his meshes
YOU MUST HAVE AT LEAST RIGS OF RODS 0.38.33 TO USE THIS CAR. THIS CAR WILL NOT WORK WITH AN OLDER VERSION OF ROR.
Gavril Omega by Gabester Now with meshwheels2, ABS, and traction control, as well as other minor fixes and improvements!
The Omega is an off-road sports sedan. Choose from three versions:
Omega Six - ~300 horsepower I6 diesel base model
Omega Ten - ~500 horsepower V10 with bigger wheels and lifted suspension
Omega Twelve - 600+ horsepower V12 with a lightened chassis, stiffened lowered suspension, and street tires
Features:
Realistic performance
Detailed flexbody
Separate detaching parts (hood, doors, trunk, fenders, mirrors, and bumpers)
Collidable submesh
Full interior
Stable on-road handling
Excellent off-road capability (except for the Twelve)
Four wheel drive on all models
Flextires
YOU MUST HAVE AT LEAST RIGS OF RODS 0.38.33 TO USE THIS CAR. THIS CAR WILL NOT WORK IN AN OLDER VERSION OF ROR.
Updated with improved suspension, handling, and crashing behavior! The exterior camera is also now correctly centered on the car.
Gavril Zeta by Gabester
This is a compact SUV.
Six versions:
2WD
SWB
LWB
Crawler
X
R
Features:
Realistic performance
Detailed flexbody
Separate detaching parts (hood, doors, trunk, fenders, mirrors, and bumpers)
Collidable submesh
Full interior
Stable on-road handling
Excellent off-road capability (except for the R and 2WD)
Flextires
ABS and traction control
Meshwheels2 for sharper handling
Please DO NOT modify this without my permission. Thanks.
Also, you can do whatever you want with it, take parts, repaint, change rims, I don't care, just give credits if you are going to release something using these parts.
I present to you, the 1915 Ford Model T. This holds the name of the oldest real car ever to be put into RoR. This is the Original "Go everywhere, anywhere" car.
There are 6 versions. There is a Pickup truck (2WD and 4WD), a Sedan, a Coupe, a Touring, and a Junker version. The gear ratios/axle ratios/wheel size/engine power/top speed are all real specifications. The top speed is a physically limited 40 MPH on the dot for all versions except the power-degraded Junker. The Junker's top speed is closer to 30. All versions except the Junker have 21 Horsepower. Junker has around 18. You cannot drive this car in Automatic Transmission mode, as the gap between 2nd and 3rd, then 3rd and 4th are too large for the game to gearshift between them correctly. Thus, you must drive in Manual or Fully Sequential gearbox mode to get up to cruising speed.
These vehicles are not flexbody, and each on average have between 10K and 20K polys total including all 4 wheels. Honk the horn for a sound only '10s - '30s Fords can produce. Aoooga! Sometimes when you turn, it heavily understeers because the front axle is not very strong, so be careful.
Custom sounds are thanks to DODGE charger (thank you!)
All meshes and N/Bs are thanks to myself, Sirendude2011.
Do not mod this vehicle. Treat this like you would a real Model T 100 years of age. Would you (attempt) to hellaflush a Model T? No, so don't do it. Same goes for hydraulics and lifts with mud tires. It is impossible to skin it with anything except solid colors (no designs), so don't try.
Enjoy this historic vehicle! The driving experience is like no other vehicle in RoR history, believe me.
6/4/2013 UPDATE- improved, non-headache-inducing engine sound loops, horn can now be honked properly!
UNIMOG 406
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
Disclaimer:
-mods for personal use ok, but don't ask to release your super engine power lift kit mod, or to use the rims/tires on your vehicle to showoff, it ain't gonna happen, yo.
Hey, This is a Undercover Police mod for the Box5 Dodge Ram.
If you have my 1st Version, Please Delete! Thank You
What Does it have?
-Flares CTRL+1/CTRL+2
-Sirens
-ABS/TCS/Slope Brake
-As Some Props
-Differentials Locked/Open
BIG UPDATE!!!
-Now are Gray
-Renamed Vehicle to "Dodge Ram 12v Undercover"/"Dodge Ram EXT. 12 Undercover"
-Fixed Description
-You Dont need to delete Original Ram
Credits/Permission
DODGE charger (Props)
HEMI (Props)
Box5 (Release)
tman 434 (Fixing the original skin as flares)
0429matthew (flares)
LGxDevil (Placing Props,Siren, TCS/ABS/Slope Brake, As other stuff)
UPDATE
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
UPDATE2
fixed the spelling mistake on the ropables so they all work now
UPDATE 3
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
Here's my jeep, it's been in development for nearly a year, it's my first vehicle that I finished.
It features:
-Seperate hood/grille, for (atleast decent) deformation (My first try):
"Deformation is awesome." -Gabester -Dana 44 axles
-Atlas II transfercase
-Powerglide transmission
I've used real life gear ratios from both the gearbox and transfercase.
-Hemi engine
With custom sounds.
-Custom liftkit
Credits to Fat-Alfie for his shock texture.
-Beadlocks
-38" Pitbull Rockers
-Custom made rollcage
-Bucket seats
-Rotating driveshafts
-Openable boot and bonnet
-A wide variety of moving parts
-Super soft tyres
Thanks to Fat-Alfie's wheelbeams
-and lots more.
[18-03-2012]-Fixed the idle sound, added ropables, made steering stronger. [08-05-2012]-Wheels tuning: added meshwheels2 and did some more tuning to Fat-Alfie's wheelbeams. Less bouncy wheels, better handling on and off the trails. -Minor fixes.
Functions
All functions work by press once functionality, also winches, so when you press the extend button once, the winch will keep extending, until you press again.
F5-F6 Front Winch
F7-F8 Rear Winch
F9-F10 Doors
F11-F12 Drop sides
W Diff Lockers (Open, Rear Locked, Both Locked)
N Driving lights
Credits:
3D models, textures, N/B, truck -file and custom sounds are
by Masa
A shader script and a material script are by Box5Diesel.
Core beta testers and useful help: Braskus, Gabester, and many other forum members.
Thanks to all beta testers and to everyone else who helped me at the
forums.
This is my newest projects and probably my best designed and nicest looking vehicle yet. I really tryed to push my abilities for this one and Im glad I did because it turned out great.
Thanks to my beta testers for all the feedback: DeGa,LJFHutch,ICEMAN[U.S.A], Fat-Alfie, Maku, and VeyronEB
Enjoy and feel free to post modified skins and pictures here Showtime-Buggy
Do not steal my meshes, N/B, or any part of this vehicle
The Volkswagen T3 Van.
You will get some different versions, so you can explore the racetrack as well a deep mud and high mountains.
Versions are:
2WD
Stock Volkswagen T3 van with rear wheel drive. Has a locker in the back for difficult situations like towing a trailer.
2WD Race
A tuned and lowered T3 RWD. It is more light-wight, has a stiffer suspension and a rear locker (split - locked) for a good handling and easy drifts.
4WD Syncro
Stock Volkswagen T3 Syncro with four wheel drive and two lockers (open - rear locked - both locked). It has a special gearbox with a extra low crawler gear and is optionally available with rear wheel steering.
4WD Syncro military
Lifted T3 Syncro with a bit bigger tires and modified bumpers for greater attack angles.
It comes with a camouflage skin to be nearly invisible on Belgium terrain.
Also available with rear wheel steering.
All versions except the race one have a deployable hitch for towing trailers, just attach a camping trailer and go camping
And please don't complain about its boxy look, the real car is as boxy, too.
Commands: press T to see the commands ingame
Rear wheel steering (some versions):
F3 and F4
Hitch:
Press F6 to deploy the hitch from under the car. Use the hitch only when it's deployed!
Press F5 to retract it again.
Update: The Airbrake sound is removed since it doesn't suits a car.
Update 2: - Improved handling and more realistic engine and gearbox settings, now it has realistic power and its real gear ratios.
- New mesh wheels and mesh parts for the race version (from Buttlamo's Vehicle Customization Parts thread).
- New mesh wheels for all syncro versions, big thanks to dmtactical for letting me use the wheels of his Nissan Hardbody.
NOTE:
- This is a project of Silvermanblue and me, so I haven't done all the work. If you like the car, please thank him, too!
- This project is based on a heavily modified highroof van from Trevor, he has full credits for the base chassis.
Credits:
- Mesh wheels (Race version): Cydex
- Air intake, intercooler and exhaust: Beolex
- Mesh wheels (Syncro version): dmtactical
Terrain description:
This is a desert island, it has no roads but tracks are marked with washed-up logs. There is a few very small settlements dotted around the island.
You start on a peninsula in the midde of the bay and drive across the sunken bridges to get to the island.
You'll need a decent offroad car as there's a section where the track dips underwater, and quite a few large mounds in the roads (where I didn't quite do the heightmap right lol)
Credits:
LJFHutch: Every single non-default object in the terrain (most of the objects I have taken from his Greece map).
PsychoDog: The actual terrain.
F1 Terrain Creator: V1.2 uses trees from the F1 Test Track.
Enjoy.
V1.2
Some fixes and improvements to the island. For the full list of all the edits read the readme. The main edits I've made is to the sunken bridges on the penninsula (I've got rid of the log section since that caused some problems when you drove over it) and added a couple more tracks and buildings. Also added some crops to the farmers field so it's not just green ground any more.
Never released Versions 1.1 - 1.19 because I didn't think there was a big enough change to justify a reupload, so this is the first update. Please tell me if I've screwed anything up that was correct in V1 and I'll fix it.
This works best with 0.38.67. If you use 0.39 there may be some extra bugs (e.g. I had a lot of collision problems when I tested with anything newer than 0.38.67) and things may not look quite right. No fixes are planned for obvious reasons (0.4 is going to be the next release, not 0.39).
*PLEASE DELETE THE OLD ZIP (Zyk.zip) BEFORE YOU DOWNLOAD THIS ONE!*
Well here it is. The official release of my not-so-official FJ cruiser.
I worked nonstop on this car for a year and a half, and gave up about 6 months ago due to just loss of interest.
I had been talking to some friends recently on the forum who said they would really like to see it tidied up
and released. I dont exactly have some long drawn out story about how it got to where it is. It was really just
a huge learning experience. but finally decided to let it go because I lost all of the original files to the mesh.
I suck at writing. So heres a list. :|
Everything-me.
pictures to the left- taken an edited by my main man, Ferrettank!
Known problems are as follows:
Missing quite a few meshes. (Mainly suspension pieces)
Interior is incomplete.
No damage.
And there is a material bug with it on Deags Trail Island map. For whatever reason, the tires are yellow. I cant figure it out...
This was my first try at animated props, flex tires, and flares, so it is what it is! Hope you enjoy it.
Also, modding, do as you wish, post pics as you wish. I dont really care. But if you'd like to release any of your mods (and credit me ;D), please ask my permission first.
I am happy to present the preliminary release of our Chevrolet Express n/b mod. Do to some real life issues I am releasing this somewhat incomplete. Most of the vans are fully drivable and have a full set of flares. Some of the others have half finished flares. They all have dashboards and seating. Also comes with a crappy lightbar that I made by myself.
Modding will be allowed and encouraged. However I request that ALL parties be credited. I will have a list in this post and on the README file in the zip. I also would appreciate displaying your modifications in this topic.
Credits
Creak = Chassis
Silvermanbblue = Body, skinning and some meshes
09challenger = Sounds
Khadner = School bus version consultant.
ROREMS = Ambulance consultant
Bonehead = for his blower mesh
VeyronEB = Camper and limo versions (Future versions in progress)
Bugs
NO weight tuning, these are not realistic in the weight department.
Some flares missing on certain versions
Suspension issue with the class b camper
Hey! This is my first mod!
I have modded Box5's ford crew cab 4x4, replacing the default RoR engine sound with a 7.3 powestroke..
It sounds better and MEANER!
I also added a bit more torque and braking
So, basically it's the same as the old one
I had to create a sound script which took a while to learn, but I did it!
Authors are: Box5Diesel (99.9% of the truck), AtomIron.
This is a Ladder Truck from the fire department Hamburg.
Build in 1995 from Mercedes Benz and Metz.
I has experimented with the slide node system and it works very well.
The command list can be opened by pressing button "T" and the ladder can be secured by pressing button "O".
The node/beam chassis and the meshes are made by me.
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-FIRE ENGINE (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
5093UID-cushman.zip
view details
Gold
Silver
Bronze
