|
|
|
Browsing tag Loads, found 47 matching files. (2 pages)
|
|
|
A telecopic trailer based on OVB-55-03V(T) model from Nooteboom.
features and commands:
- can extend up to 40m (CTRL+F1/F2)
- manual steering (F7/F8)
- adjutable suspension (CTRL+F3...F8)
[read more] |
|
|
 21 Comments, add comments here.
|
|
|
Selfsteering Trailer with Dolly
How to use:
Pull the trailer next to the load so the rear part is at the right place.
Disconnect the rear part with F11 and pull the front part to the front attachment point.
[read more] |
|
|
|
|
22 Comments, add comments here.
|
|
|
Here is the first US rolling stock, so you can finally tow some waggons with my ALP.
A loadable 40ft boxcar, comes in several liveries.
You can open the doors by grabbing the levers at the doors, the couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons 
[read more] |
|
|
|
12 Comments, add comments here.
|
|
|
Trailer P-32 is designed for quick transport wheeled and tracked vehicles and other material to the weight of 40 tons. In an emergency, up to 46 tons, maximum speed may be 10 km / h Is designed for off-set with tractor on roads I to III. class, the roads are paved and after tolerable terrain without external imbalances and obstacles.
Technical and tactical data
Dimensions:
- Total length (including shaft): 9475 mm
- Overall height: 1420 mm
[read more] |
|
|
|
17 Comments, add comments here.
|
|
|
Windmill Mountain Map
All content is for use in Rigs of Rods only. Read the copyright file included in the zip!
This is a small map I built for my erectable wind engine.
[read more] |
|
|
|
11 Comments, add comments here.
|
|
|
Set of ISO shipping containers. Contains 20', 40', 45', 48', and 53' sizes.
Many thanks to fidoj and sputnik_1 for the chassis and locking mechanism.
Many many thanks to the community for submitting so many skins for these things! In the mods section below, you'll find eight skinzips full of 150 skins produced by the RoR community. (And almost all of them are tolerably good!)
[read more] |
|
|
|
|
10 Comments, add comments here.
|
|
|
This is a simple Bridge Load i doodled in Sketchup in about 20mins. So dont expect a perfect mesh.
It has four ropables ontop so you can lift it.
Expect it to swing around a bit, since the weight is added at the outer nodes.
[read more] |
|
|
|
10 Comments, add comments here.
|
|
|
This is a Krone Box Liner container chassis.
It can carry 20' or 40' containers, compatible containers are in this pack:
http://www.rigsofrods.com/repository/view/4251
It can load 1x 40', 45' or 48' are also possible, but that may result in too much front and rear overhang and then the container might hit the tractor unit.
The other possibilities are 2x 20', 1x 20' in the middle or at the end with retracted chassis back.
[read more] |
|
|
|
12 Comments, add comments here.
|
|
|
This is a basic traffic cone I had knocking about for quite some time. You can either use a crane to move it around or place them on a terrain.
It has a low polygon count and has a very simple node and beam structure, so you should be able to spawn many before getting a large FPS drop.
It is also contactable + ropable, and is ~1m high, weighing 7kg.
Credits:
[read more] |
|
|
|
9 Comments, add comments here.
|
|
|
A pack of flatcars (standart 40ft, bulkhead 40ft and heavy weight 8-axle), all come with different skins.
The couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
Known bugs:
If you enter a flatcar through the vehicle selection menu game will crash if you try to exit the flatcar, simply change into another enterable vehicle via the menu and exit there.
[read more] |
|
|
|
12 Comments, add comments here.
|
|
|
Here's a little trailer with a tank on it, you can tow it around.
Updates in version 1.2:
>Added a UID to fix some compatibility issues
>Meshwheels now work the right way on more maps, not 100% though.
[read more] |
|
|
|
|
8 Comments, add comments here.
|
|
|
Here is a Flat screen TV that you can load into the back of a pickup truck. It is contactable to vehicles that have a contactable submesh.
Included is a template to add your own image to the TV screen. |
|
|
|
6 Comments, add comments here.
|
|
|
WOODEN CRATE PACK
This is a pack of wooden crates. I have attempted to make them sort of high-detail and I think I have succeeded for the most part. There are many variations inside, so look at the list below. In the future I am willing to make more requests for different versions. These crates have a 'hooking point' for cranes and also have 'ropables' so you can fasten them to other vehicles. They also include a submesh so they can be contactive with other submeshes/contactive structures. They emit really good framerate because of the simply-low node/beam count. They can be used in groups without affecting your framerate heavily. There are many versions, too.
Normal (OSB)
IKEA
[read more] |
|
|
|
|
6 Comments, add comments here.
|
|
|
A simple reskin of the 45 foot trailer made by Donoteat.
It is a arctic cat skin showing alternative decals than the original.
Credits goto Donoteat for the trailer.
Skin by:ME |
|
|
|
7 Comments, add comments here.
|
|
|
This is my new lifting equipment for lifting a concrete floor.
The lifting frame will automatically attach to the floor when they are close togheter!The floor can be detached with CTRL+ALT+F9/10. Be sure that your crane has forwardcommands otherwise this won't work!
Having any trouble?
Problem thread!
[read more] |
|
|
|
3 Comments, add comments here.
|
|
|
Here is a large I-beam load. It weighs at 12 tons. It can be loaded on a flatbed trailer and hauled to a construction site. It is also contactable so cars with a contactable submesh will be crushed by the beam.
'Feel free to retexture it, resize, make it smaller longer bigger or shorter. You don't need my permission for this creation.
Have fun |
|
|
|
3 Comments, add comments here.
|
|
|
This is my Car dolly. It is straight submesh and very easy on FPS. This is more of a proof of concept as apposed to a full on new modification. You can use almost any vehicle to tow any other vehicle. Since it is submeshed you can scale it to be used on any vehicle rather easily. As of right now this is considered to be in beta. On a side note it is currently impossible to tow any vehicle with contacters. You will have to comment them out or watch them be destroyed by the wheel clamp.
Also feel free to modify and redistribute. Credit is not necessary but it is appreciated.
http://www.rigsofrods.com/threads/85...969#post943969
Commands
[read more] |
|
|
|
3 Comments, add comments here.
|
|
|
This is another mod for the Dryvan Trailer, only this time, it is a McDonald's trailer! So far there are no problems loading the trailer itself, so all you just do is just download and play! Btw, place it under packs/streams/vehicles for it to work properly. Have Fun! Credits: Trevor for the trailer, and me for the skin.
Also, delete the original dryvan trailer because this one overwrites it. |
|
|
|
4 Comments, add comments here.
|
|
nooteboom_teletrailer-T42.zip
view details
Gold
Silver
Bronze
