Simulation Info:
the junior go kart is set up to be easy to handle
the pro go kart is much harder to drirve
at low speed you need to turn in the opposite direction that you want to go and THEN turn in the direction you want to go because of torque steer from the solid rear axle
also when the gokart resets that means that the accident would be fatal
and if the steering wheel flips over that means that you either damaged the kart beyond return or you did the previously stated and also broke your arms
and if you flip the kart over and it starts spazzing then you have crushed the rider
I present to you, the 1915 Ford Model T. This holds the name of the oldest real car ever to be put into RoR. This is the Original "Go everywhere, anywhere" car.
There are 6 versions. There is a Pickup truck (2WD and 4WD), a Sedan, a Coupe, a Touring, and a Junker version.
The gear ratios/axle ratios/wheel size/engine power/top speed are all real specifications. The top speed is a physically limited 40 MPH on the dot for all versions except the power-degraded Junker. The Junker's top speed is closer to 30. All versions except the Junker have 21 Horsepower. Junker has around 18.
You cannot drive this car in Automatic Transmission mode, as the gap between 2nd and 3rd, then 3rd and 4th are too large for the game to gearshift between them correctly. Thus, you must drive in Manual or Fully Sequential gearbox mode to get up to cruising speed.
These vehicles are not flexbody, and each on average have between 10K and 20K polys total including all 4 wheels. Honk the horn for a sound only '10s - '30s Fords can produce. Aoooga! Sometimes when you turn, it heavily understeers because the front axle is not very strong, so be careful.
Custom sounds are thanks to DODGE charger (thank you!)
All meshes and N/Bs are thanks to myself, Sirendude2011.
Do not mod this vehicle. Treat this like you would a real Model T 100 years of age. Would you (attempt) to hellaflush a Model T? No, so don't do it. Same goes for hydraulics and lifts with mud tires. It is impossible to skin it with anything except solid colors (no designs), so don't try.
Enjoy this historic vehicle! The driving experience is like no other vehicle in RoR history, believe me.
This is a mod to the BI3300 by BusMan1985. All that I've changed is the sounds. The engine has 2006 DT466 sounds and the others are from an International 4300 and an IC CE200
It is meshed, and much higher quality. Credits:
Pricorde - Original bus
Derbymutt - Revival, meshes, re-texturing, n/b fixes and changes, shader stuff
Fradias - Wheels & Tires
Modding Policy:
Modding and releasing any content for this bus on a mod of it or on another vehicle is permitted and encouraged as long as due credit is given.
Basically, Mod away and give credit.
Info:
It is fully skinnable, if you do not like the plastic paneling on the bus, just comment out agora_fb.mesh and agora_rear_lights.mesh from the flexbody section as well as the forset line below them.
It is also deform-able and flexbody.
I have also used flexbodies for the tires, so that they work in multiplayer and still are deform-able and separate from the rim mesh.
"Pay up, or get licked"
This is the 2008 Sterling Bullet wrecker from Lizard Lick Towing and Recovery in North Carolina. If you've seen the show, you'll recognize this truck
2008 Sterling Bullet
6.7L Cummins Turbo Diesel
6-Speed 68RE Automatic Transmission
Regular Cab
Lizard Lick Towing and Recovery logos on the doors
Credits go to Box5Diesel for the original Bullet wrecker
"Pay up, or get licked"
This is the 2008 Dodge Ram 5500 wrecker from Lizard Lick Towing and Recovery in North Carolina. If you've seen the show, you'll recognize this truck
2008 Dodge Ram 5500
6.7L Cummins Turbo Diesel
6-Speed 68RE Automatic Transmission
Regular Cab
Lizard Lick Towing and Recovery logos on the doors
Credits for the original Bullet wrecker go to Box5Diesel
This is a mod of the International4700_pack. The trucks are all 1998 International 4700s and are as follows:
5th Wheel (DT466E)
Gooseneck (T444E)
Flatbed (DT466E)
Long Flatbed (T444E)
Terrain Truck (DT466E)
Sounds were recorded from a 1998 International 3800 school bus (built from the 4700) with a 7.6L DT466E, and from a T444E engine
Credits go to dneufeld for the original International 4700 pack
This is a 2006 International 4300 ambulance, made from Khadners CXT Ambulance. It's powered by a 7.6L Navistar DT466 which is attached to an Allison 2500 PTS automatic transmission
This is a 2005 International 3300. It has a 6.0L VT365 turbo diesel V8 engine and an Allison 2100 PTS transmission. It's built off the International 4200 chassis and is nearly identical to the International 3300
This is a mod to the 2009 pack by unknown. It's a semi fantasy truck. Basically, it's a 2010 Dodge Ram 1500 outfitted with SRT8 equipment. The original 5.7L Hemi was replaced with a 6.1L Hemi, the 545RFE 5-Speed auto was replaced with a W5A580 5-speed Automatic and SRT8 rims were put on. It's also got a supercharger on the engine. Engine sounds are from my dad's 2007 Dodge Charger SRT8, and others are from my 1999 Dodge Ram 1500. Ctrl-1 activates high beams, Ctrl-3 activates cargo lights, and Ctrl-4 activates hidden strobe lights
Credits for the original truckfile and meshes go to Box5Diesel as the 2009 pack is a mod of his Sterling Bullet pack
All American Soap Box Derby Masters division car Authors:
Derbymutt - Everything Changelog:
Beta 1:
+Initial Release
+Meshed
+Arcade version only
Beta 2:
+Updated Body mesh
+Helmet
+Correct size
+Meshwheels
+Improved Handling
+Visible pulley system
+Airfoils
+Body is lower poly
Release 1:
+Reflective body
+Fully animated simulated interior and mechanics
+Realistic axle damage
+Simulation version added
+Ropables
+Colliders
+Submeshed
+Skinnier wheels
+Handling fixes
+Wheels now in correct positions on axles Background:
I am building the car that I finished 6th in the world finials with in 2007. It is not an R/C car, it is a car that you get into and roll down a hill with. The real car does not have an engine, nor does it have brakes on the wheels. I plan on simulating the real car completely in this project. Discuss:http://www.rigsofrods.com/threads/102435
Do not edit the MESH in any way shape or form without my permission. If you want to use
the n/b all I ask is that you PLEASE consult with me first. Public or private. You are free
to make custom colors, change the motor, wheels, etc. But do not edit the verts on anything
here in this zip.
Credits:
darn_it: Main 440 engine and U-joints
eclipse/faustknight: Rear Dana 60
Tenderpaws: Transmission
ADR's Carmageddon 2 cars: Some textures
Mythbuster: Support, a lot of testing, and being there for rebounding ideas.
Jaw-4: Testing, support, and being someone to talk to.
PRT-Audiman: Sound and tuning help
Skyhawk: Mini's
Jaimswallace: Awesome teaser video
Dkutch: Everything else.
this car i made that doesnt use a engine to drive but a rotator
this car is made on a working concept from Lifter
(Clutch-and-vario-differential-working-in-ROR)
have fun with it all needed controls are in T menu
before you try to drive it with the uparow put it in N and not in gear it will stall
idea by Lifter
N/B made by Pfuu
i really want to make .mesh but i cant get the needed plugins to work to inport the N/B or the export plugin to export to .mesh
if somebody could help me with this PM me
This a mod of the International_4700 pack. It's just the 2WD 5th Wheel, but it's been made into a 2006 International 4400 with a DT466. The brakes have been fixed so that the truck doesn't stop on a dime. Sounds were recorded from a 2006 International 4300. I also put in the gauges from an International 4400
Credits go to dneufeld for the original International 4700 pack
This is another mod of the 2WD 5th-Wheel International 4700 by dneufeld. This time, I made it into a 1989 International S1900. The real truck is owned by the Southeast Raleigh High School marching band. I will be releasing a trailer for it shortly, as well as the other trailer and the 2 John Deere Gators. Sounds are from the band's S1900.
Credits go to dneufeld for the original International 4700 pack
This is a 2008 International DuraStar 4300 ambulance. It's powered by a 7.6L Navistar MaxxForce DT and an Allison 2500 PTS. This is basically khadner's 4300 with Durastar and MaxxForce DT sounds
This is a fine-tuned version of ArthurHucksake's chevy p30(or mighty mite). with starling island bus skin.
i'm not the author of the meshes and skin. i just fine tuned the .truck file.
this bus comes with a left side slide door and meshwheel, and 16seats
this is a fusion of the starling island P30 midibus, and the mighty mite.
All that I've done is try to make the bus as realistic as possible.
Credit for original bus goes to ArthurHucksake and Cydvx.
FEATURES
- realistic weight(about 3.4ton)
- realistic centre of gravity
- real front anti-roll bar,and fine tuned suspension
(all above make the bus handles much better,together with a much more comfortable ride)
-torque curve
-minor engine tuning
thanks for the authors for making the bus and skin
please send me a massage if you found any flaws, bugs. or if you have any suggestions for update. Thanks
ENJOY!
update 04 27 2012
- lightened meshwheel
- idle speed and torquecurve fix
- weight distribution and suspension setting fix
- engine tuned down for more realistic performance(this does not affect the top speed)
This version could handle and perform quite differently from the previous version, so please give me your feedback if you have any suggestions. thanks!
Hello, I'm here to show a skin that created the MB Atego COMAX, with permission of the coco, the company's Brazilian postal service called Correios or Sedex.
Show some pictures and hope you like it.
Credits to Coco and Pedro, creators of the vehicle. [read more]
well here is my first upload the the repository its a skin for the Mercedes-Benz Atego with CoMax-Body&Lift V2 the skin is for my company called rormart. you dont have to sign up to get the skin if you do wish to purchase or sign up here is the link: rormart
to install just put the DDS file in your MB-Atego-CoMax.zipMB-Atego-CoMax.zip and your done [read more]
After a LONG time working on and off I bring you this:
DAF XF105 8x4 Hauling Truck Original truck by Questnl
You may have seen previous iterations of this truck on this site before, but none as extensive as this.
Here is what I have done: -------------------------------
() Completely redid cab texture, from scratch
() New HD Wheel Texture
() Added Traction Control
() Increased power, & braking
() Added Anti-Lock-Brakes
() Added slope brake
() Using Wheels2, with user controlled tire pressure ingame
() Decreased Weight (more realistic now)
() Sharpened up steering
() Updated suspension
() Updated Help.png
() Updated preview picture
() Fixed translucent metal mesh
() Added Beacons
() Updated ability to raise/lower extra wheels
() Added user controlled lights (see ingame help on your dash)
() Added rear flares:
-Reverse lights
-Blinkers
-Brake lights
Brand and type: Mercedes Benz Atego Sleepwagen ANWB
Ingame name: MB Atego ANWB
Tested in: 0.38.57
This is an Standalone file!
I got permission from Lenni to release this back in April 2011, so I thought this would make a nice addition to the repo.
The ANWB is a dutch company that does most of the towing work in Holland. They basicly control the Roadside assistance branch.
The word ANWB stands for Algemene Nederlandse Wieler Bond.
I am happy to present the preliminary release of our Chevrolet Express n/b mod. Do to some real life issues I am releasing this somewhat incomplete. Most of the vans are fully drivable and have a full set of flares. Some of the others have half finished flares. They all have dashboards and seating. Also comes with a crappy lightbar that I made by myself.
Modding will be allowed and encouraged. However I request that ALL parties be credited. I will have a list in this post and on the README file in the zip. I also would appreciate displaying your modifications in this topic.
Credits
Creak = Chassis
Silvermanbblue = Body, skinning and some meshes
09challenger = Sounds
Khadner = School bus version consultant.
ROREMS = Ambulance consultant
Bonehead = for his blower mesh
VeyronEB = Camper and limo versions (Future versions in progress)
Bugs
NO weight tuning, these are not realistic in the weight department.
Some flares missing on certain versions
Suspension issue with the class b camper
UPDATE
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
UPDATE2
fixed the spelling mistake on the ropables so they all work now
UPDATE 3
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
Authors: sirendude 2011 and various members for support.
This is a pack of all of the vehicles I have made in the past 4 months. All of the cars are N/B only, don't have submesh, and some have no engine tuning.
none of these vehicles float, and one car (siren's auto 12x12 special) has all wheel drive, all wheel steer, working reverse lights, headlights, brakelights, and turn signals (flares). Some vehicles have opening hoods and doors.
Vehicles in this pack:
a 6x6 pickup truck called "mud slinger" (includes a Monster Truck version)
a 4x4 pickup truck simply called "pickup truck"
a few muscle cars/ sportscars (they are "highway terror", "lancia delta N/B Car", "tire burner", and "muscle car")
a school bus
a few offroaders ( they are "rock locker", "redneckrickem's dune buggy" (a YouTuber's buggy), "traxxurator"+"traxxurator dump" and "4x4 offroader")
a motorcycle (it has training wheels for stability :P)
and an engine that uses negative shocks to run, just give it a spin with the mouse and it runs. (be careful it explodes after a certain RPM)
You have the freedom to do whatever you want to these vehicles, but give me credits for the vehicle's N/B.
To open a hood or door, press F1 - F4. These commands do different things like open and close a door or hood.
These are re skinned trevors peterbilt 359s made to look like western star trucks. i am the skinner to a point, the skull on the side is part of a skin by "marco" so he gets credit for the skins also. i added all the rest. have fun.
Credit- Trevor- Trucks
-Platerpants"me"- skins
-Marco- skulls on skins
THIS IS A SKIN MOD FILE OF THE 78 DODGE POLICE (CREDITS GO TO ORIGINAL DESIGNERS) IT IS AN OHIO POLICE SCHEME BASED OFF A SMALL GEAUGA COUNTY TOWN KNOWN AS CHARDON. I TOOK MY TIME TO GET THIS TO WORK MORE UPDATES OF THIS WILL COME AND REMEBER I AM NOT THE MESH DESIGNER IM JUST THE SKINNER. HAVE FUN IN AN OHIO POLICE CAR. WILL OVER RIGHT ORIGINAL 78 DODGE POLICE. OH YAH AND IT HAS 2011 CHARGER TAILLIGHTS. I like to make scenes with this and my dart in it.
Authors: BoneheadDT466BusMan, Dodge0359, nelson480, Box5diesel (If you have worked on any part of this project over the years and have been left out, please let me know and i will add you)
Here is the school bus pack some of you have asked me about. I've changed it up a bit for some variety. Most are Blue Bird bodies but there is a Carpenter and a Thomas as well. They drive pretty realistically.Here is the lineup:
1986 Blue Bird International S-1800 with an International Navistar 9.0L V8 Diesel and an Allison MT-643 transmission
1990 Blue Bird International 3800 with an International Navistar DT360 Turbocharged 5.9L Inline six cylinder Diesel and an Allison AT-545 transmission
1988 Blue Bird International S-1700 with an International Navistar 7.3L V8 Diesel and an Allison AT-545 transmission
1996 Blue Bird GMC CV200 with a 366ci GM gasoline V8 engine and an Allison AT-545 transmission
1985 Carpenter Chevrolet C/60 with an 8.2L Detroit Diesel Turbocharged V8 engine and an Allison AT-545 transmission
1985 Blue Bird GMC 6000 with an 8.2L Detroit Diesel V8 engine and an Allison AT-545 transmission
2007 Blue Bird International SBCV 3300 with an International Navistar DT466 7.6L Turbocharged Inline six cylinder Diesel and an Allison PTS 2500 transmission
1979 Thomas International S-1700 with an International Harvester 345ci gasoline V8 engine and an Allison AT-545 transmission
This is a pretty large file and is very sound file intensive. There have been conflicts with the other school bus files with sounds not working properly or at all. These buses are not perfect and do not use any meshes that have not been seen already.
a reskin of the stock dodge. this is a 1974 dodge dart swinger designed to look like my dad's. it has aar cuda stripe that says 360 at the end. and has ralley wheels. all credit goes to the original designers of this car. and this will overwrite the original if you have it. if this will not load just aadd the .skin or .png skin fle to your original dodge folder in the name of what you want to call it. sorry if it doesnt load properly. you may just end up skinning your car.
A Dutch skin for the Mercedes Atego Metz aerial firetruck.
It's a skin based on the Mercedes Atego from the fire department of Middelburg, Zeeland in the Netherlands.
I have tried to make it as real as possible, but because this firetruck is an older Mercedes Atego version than the one in use by the firedept. I could not exactly reskin all parts correctly.
I hope you like it!!
Pedro (Atego Chassis)
firepics (Firetruck body etc.)
Lenni (Nodes/Beams)
Ruben (Dutch skin)
Install: Just overwrite the files in this .zip with the .zip of the Mercedes Atego aerial firetruck
YOU MUST HAVE AT LEAST 0.38.33 TO USE THIS CAR. THIS CAR WILL NOT WORK WITH AN OLDER VERSION.
Updated with modeled panel gaps! Fixed UV mapping on Army version!
1949 Ford by Gabester
The 1949 'Shoebox' Ford was the first all-new design to come out of Ford after the war, featuring a stylish aerodynamic body shape and sophisticated independent front suspension.
Features:
Realistic performance
Detailed flexbody
Full interior
Collidable submesh
Custom sounds
Separate detaching parts (hood, fenders, doors, trunk, headlights, and bumpers)
Five versions (Club Coupe, Moonshine Special, Tudor, Fordor, and Indiana Jones US Army)
Flextires
DO NOT modify this without my permission.
You need a fast computer to handle this car. Requires .38.33.
****Please note, this is the updated version. I had posted an earlier version with errors. I was not aware that they would both be posted to the repo. This one is better!
Authors: Bonehead, DT466BusMan, Dodge0359, nelson480, Box5diesel, khadner ,rorlover11, thatsnice ,IC CE300 (If you have worked on any part of the many versions of this bus over the years and have been left out, please let me know and i will add you)
Here is the school bus pack some of you have asked me about. I've changed it up a bit for some variety. Most are Blue Bird bodies but there is a Carpenter and a Thomas as well. They drive pretty realistically.Here is the lineup:
*1986 Blue Bird International S-1800 with an International Navistar 9.0L V8 Diesel and an Allison MT-643 transmission
*1990 Blue Bird International 3800 with an International Navistar DT360 Turbocharged 5.9L Inline six cylinder Diesel and an Allison AT-545 transmission
*1988 Blue Bird International S-1700 with an International Navistar 7.3L V8 Diesel and an Allison AT-545 transmission
*1996 Blue Bird GMC CV200 with a 366ci GM gasoline V8 engine and an Allison AT-545 transmission
*1985 Carpenter Chevrolet C/60 with an 8.2L Detroit Diesel Turbocharged V8 engine and an Allison AT-545 transmission
*1985 Blue Bird GMC 6000 with an 8.2L Detroit Diesel V8 engine and an Allison AT-545 transmission
*2007 Blue Bird International SBCV 3300 with an International Navistar DT466 7.6L Turbocharged Inline six cylinder Diesel and an Allison PTS 2500 transmission
*1979 Thomas International S-1700 with an International Harvester 345ci gasoline V8 engine and an Allison AT-545 transmission
This is a pretty large file and is very sound file intensive. There have been conflicts with the other school bus files with sounds not working properly or at all. These buses are not perfect and do not use any meshes that have not been seen already.
These buses do have seats and realistic parking brake sounds!
Here is is again. Yet another mod to The Peterbilt 362 CaboverV2 as released by Transcontinental.
As well as a totally bitchin' skin (Copyright Marco Heitala 2011) i've also changed to the engine, its no longer a 'truck puller' Its just a normal truck for haulin'
Karosa Renault Citybus 12M
Model of Karosa Renault Citybus 12M - czech version of Renault Agora S. It was produced between 1996-2001 by czech manufacturer Karosa as cooperation of Karosa and Renault. It was one of the first low floor buses in Prague
Authors:
-Pricorde (chassis, skin)
-Agora Citelis (engine sounds)
-masfilip (skin)
Works in RoR 0.37, not tested in older or newer.
YOU MUST HAVE AT LEAST RIGS OF RODS 0.38.33 TO USE THIS CAR. THIS CAR WILL NOT WORK IN AN OLDER VERSION OF ROR.
Updated with improved suspension, handling, and crashing behavior! The exterior camera is also now correctly centered on the car.
Gavril Zeta by Gabester
This is a compact SUV.
Six versions:
2WD
SWB
LWB
Crawler
X
R
Features:
Realistic performance
Detailed flexbody
Separate detaching parts (hood, doors, trunk, fenders, mirrors, and bumpers)
Collidable submesh
Full interior
Stable on-road handling
Excellent off-road capability (except for the R and 2WD)
Flextires
ABS and traction control
Meshwheels2 for sharper handling
Please DO NOT modify this without my permission. Thanks.
A Pack of two Sprinters, one version as a THW car and one as an ambulance.
Place the zip file into your packs folder, it requires version RoR 0.35.
If you want to mod the cars please make sure you change ALL materials and make them
not conflicting with this original pack. If you have problems with that contact me on the forums.
Tilt tray wrecker truck based on Pedro's Atego chassis.
Chassis and cabin meshes by Pedro,
wrecker body by Lenni.
If you want to modify it please change the UID so there are no conflicts with the original truck.
Updated 29-06-11, fixed some small errors in the .truck file,
it now also has a GUID for using .skin files with it.
Scania R 420 and R 480 Topline trucks, two different skins included.
Updated, doesn't use sections anymore.
Installation as usual, put the file in mydocuments/RigsofRods/packs.
If you have the older version then please remove it (this doesn't automatically overwrite!)
Works only in 0.36 and above.
All mesh and node and beam parts of the model are made by me, credits to pedro for the steering wheel texture.
If you want to reskin it make sure it doesn't conflict with my original pack in any way and contact me on the forums before you release any derivates of that model.
Only use one version of the truck at a time, more might crash the game.
I am not responsible if you mess up your RoR by installing or using this truck in a wrong way.
buggy.zip
view details
it is compatible with 0.38. thank you very much
Gold
Silver
Bronze
