This is a basic node/beam structure of an 8x8 offroad truck. It features: swingarm independent suspension, 4 wheel steering, and a pretty flexible frame. At least credit me if you release mods of this vehicle. Have fun with it and tell me what you think!
A nice has some weakness to it but it is good in other ways. If you put a cab or anything to it the frame will need a syntax added or additional beams. This is incomplete.
Just a little something I made a long time ago; the Hillclimber from the game 1nsane. You can do what you want with it, just don't release any mods on the repository without my permission. This is just a beta version, so it has some bugs (sometimes the axles will go through the hood) but it is fun to drive.
Credits:
Chassis: Me
Submesh/Skin: Me and Squatch
Headlights: Aperion
Blower: Bonehead
'Rocksnorter' - two versions of a crawler: one with RWS the other without
'Gobin' 500 - a racing buggy/truck with dash shift lights: activate with ctrl+1
Requires RoR version .38.24 or later
Credits to:
Lenni: for the use of his wheel rim and fuel tank meshes
Box5diesel: for his Cummins engine mesh
Fat-Alfie: for allowing me to use his steering wheel
Simp: for his tyre texture
Here is the Humvee pack that I have been working on, in the pack there is a base model and a ambulance model. the front axle will break some times when you hit some bigger bumps at high speeds or when you dive off a cliff, but I think any real axle would break under the same conditions. Thanks to Qer for fixing the rear wheels so that there straight up and down instead of at an angle. and thanks to Box5Diesel for telling me how I could fix the suspension so that it still performed pretty much the same after I lightened the Humvee from over 18tons to around 10 tons. feel free to modify these you can take the base model and make it into pretty much any Humvee model that you could want, all I ask is that you give credit where due and unique id your mod so that it does not over right the originals . enjoy! P.S. if you have the beta version you will want to delete it.
This is an SUV, or at least was inspired by one.
As I am beginner, learning to drive now, I am improving my knowledge.
I hope you enjoy the car.
By: Fifty
Here is my first RoR model. It's a off-road truck with three-star-wheel system.
Features
-High manoeuvrability
-Swim ability, with speed up to 40 km/h!! It can turning on the water, and doing it fine!
-Wall climbing, up to 2 meters
-steering shifts center of mass, so you can avoid overturn using it, or safety turning about on steep slope.
Problems:
em... eh... aha! it can't driving straight, this babe not for roads.
I was confronted with many difficulties while making this model. At the end i was annoyed and finished model without any visual good.
I know, it looks lame, and there can be some neglects, i allowd, so feel free to modify it, if you want, I'll be glad.
Thanks to all, who made this genius game, and sorry for my english.
Jeep once more... Ambulance :-)
It has:
- redone all textures (manually by me: body, wheels, emissive);
- working lights (brake, side markers x 6, reverse);
- Ctrl + 1 turning on strobos (flashes). 2 x white and 2x blue in front grill, 2 x red in back lamps.
It has:
- redone (once more) all textures (manually by me: body, wheels, emissive) - it is face-lifted model;
- working lights (brake, side markers x 6, reverse);
- Ctrl + 1 turning on strobos (flashes). 2 x white, blue/red in front grill, blue/red LED on back window.
Nice Jeep Cherokee. Rebuild version of adeodat Jeep.
Changes:
- Redone chassis: front bumper, hood, windscreen.
- New engine, gearbox and brakes. Car is more handly and faster. 1 and 2 gear give u possibility to cruise .
- All textures are completely redone, mapping too.
- New wheels with new textures, new tires.
- 3 brake lamps, fog lamps, rear fog lamp.
Nice, small car .
Maybe it is hard to drive (a little) but you must simply learn how to drive.
Car is optimized for offroad, not high speed. But high speed is possible too...
If you must to know car have advanced wheels - and in ROR 0.36 (and above...) you shold turn it off...
Keys:
Ctrl +:
1 - front fog lamps
2 - rear fog lamps
3 - additional front lamps
4 - high beams
5 - roof lamps (yeah )
Trailer:
F1/F2 for front legs
F5/F6 for rear legs
F3/F4 for hook high.
Jeep Cherokee of Seattle Fire Department Operation Battalion Chef
Ok. I know... another (boring ) Jeep. But i was asked about it .
This Jeep is modification of my green offroad version. Chnges are:
- new textures (of course...), and this based on Seatlle Fire Department operation battalion chef. And this is almost ideal because they haven't Jeep Cherokee... only Chevy Suburban .
- red beacons and no roof lamps.
- strobos (CTRL + 5)
Beacons are from beacon-all pack. And i didnt change anything there.
Another skin for cadillac84's Unimog U5000 SAR, this time a Belgian Civil Defense one. On the side doors you can read "Federal Public Service Interior - Civil Defense - Libramont unit (situated in the Luxemburg province, Belgium) - Belgium"
Nog een ander skin voor cadillac84s Unimog U5000 SAR. Het is een Belgische Civiele Bescherming versie. Op de portieren lees je "Federale Openbare Dienst Binnenlandse Zaken - Civiele Bescherming - Eenheid Libramont (Libramont bevindt zich in de provincie Luxemburg) - België"
This is a new skin for cadillac84's Unimog U5000 SAR. I made it look like ORES trucks (Belgium, ORES is a gas and electricity provider). I hope you guys will like it
Hier is een nieuw skin voor cadillac84s Unimog U5000 SAR. Het is een ORES wagen (ORES is een Belgische gas- en electriciteitsleverancier). Ik hoop dat je het leuk vindt!
8x8 Tatra truck but this time in monster shape, adjusted shocks/added shocks, engine parameters changed, suspension height changed, some reinforcement done, massive soft swamper tires.
OLD VERSION!
Dodge1500, finally a official >0.33 release, insane amount of things added, deleted, modified and fixed, place the file in your packs folder and play away..
There's 2 versions, complex and simple, only use complex in singleplayer AND if you got complex tyres enabled, otherwise the wheel meshes will behave weird.
Fliprights on F9-F10, towhook adjustment on F11-F12
Edit:change the idle from 7200 to 1000, that will fix the transmission issues, lol.
I did not build this truck, I just put a lift, new wheel face, bigger tires, and new Skins on both these Dodge rams. One is a Red 3rd gen Dodge with a 4-6" lift, the second is a 2nd gen White Single cab Ram with the same lift and tires. Thanks to the builder of this truck, it\\s a great platform.
This truck is really fun doing slow technical stuff offroad, it performs like a real truck.
Also the 5th wheel hitch I raised to high and the editor kept freezing on me so i couldnt get it back lower, but the suspension isnt setup to tow, you need to stiffin the rear suspension in the truck folder, but this is more of a offroad truck. You can put these skins on the stock lift truck and stiffin the suspension in the rear for a great tow vehicle. Either way, enjoy the new look and style of the Dodge.
This is not a crawler, its more of a normal acting lifted truck with not as much articulation and better street manners. I wanted to improve my original 94 Dodge into somthing i'd use more, so I added some axles, exhaust, emissive lights, new lift and tires, color, and 2500 rear fenders. It works well offroad if u drive like a real truck would. Personally I like it alot more now, so I hope you guys do to. You dont need any other files for it to work, it's self contained in the Zip.
The truck will appear in the Offroad truck section at the truck selection screen.
This little beast is alot of fun. It's built extremely tough to withstand a Baja map that i'm working on. I didnt want it breaking halfway through a race and having to restart.
Its alittle drifty, meaning it spins out sometimes if u land off or give it to much throttle in a turn. But once u get a feel for how to drive it, u can control it well.
Jumping can be controlled in the air with throttle and brakes. If the nose starts to drop, shift to 6th and give it full throttle until it levels out. And if the nose starts to lift up to high, just tap the brakes and it will lower the nose for a nice landing like u would on a dirtbike in the air. Again, it'll take some practice but once u get the hang of how to control it in the air u can land some really big jumps.
Has 6 headlights, so driving at night is fun. Enjoy
a mod to box5's trophy truck (not on the repo, but a dead thread)
wieghs about 1.43 ish tons
the full fender version has meshwheels off the prerunner [read more]
This truck is designed for trails and exploration, it's a bit big for crawling courses. I took Aperion's BajaRenault (Based on Pricorde's terrain editor) and swapped the front suspension to a solid axle. The suspension is pretty soft, it is not meant for racing, although this suspension performs well for Baja driving, if you can keep it on its wheels...
Added flippers.
New rear cage with an exo cage for the cab.
Lowered gear ratios but still a high top gear for cruising/jumping.
Changed the exhaust point.
Shortened a bit in the rear.
If you have the original BajaRenault, you need to remove it before installing this truck to prevent a conflict. This file also DOES NOT contain the wheel textures, RoR already has them. The beam color you see in the picture is from me modifying the the "Rustysteel.jpg" in the trucks folder, the beams will appear normal for you...
Please ask me before uploading a modified version and give credit where credit's due (Pricorde, Aperion and me)...
THIS HAS BEEN UPDATED:
FIXES:
THE 01 ON THE SIDE
THE RANDOM BLACK LINES.
This is the old General Lee from the Dukes of Hazard. The original Dodge Charger was by bonehead and I gave it a new paint job (skin) and then modded the engine and gearbox to make it more like the original General from the program. Hope you like it.
Credits:
Dodge Charger (.truck file): bonehead (kudos to him)
Skin and Engine: Me (FlyingGuru)
Hummer H1 Armored V2 :: PLZ DELETE YOUR OLD hummer_hi1.zip OR YOUR GAME IS GOING TO CRASH ::
-features:*mesh car
*mesh wheels
-credits:
*chassis: me and Box5diesel for the original
*meshes and textures: Antics Technologies Ltd www.antics3d.com
*modding: me
*some improvement: Zippy, thanks to him
Change log:
*internal view fix by Zippy
*new wheel band by Zippy
*flares deleted
*major update: chassis don't brake so easily than v1
Things to be done in version 3:
*fit chassis to mesh (better than now)
*make flares
*make machine gun view
Knows bug:
* steering axle break if you take a 10 meters jump ;-)
This a car is not a flexbody one. Because Google Sketchup meshes are not compatible. But it still looks realistic.
NOTE: Don't redistribute this work or modify it !!! Because I have asked original author from the meshes if i can use it (copyrighted) !!! So plz don't modify this work !!! Just play with it !!!
Kenworth trial truck based around a w900. The pack contains two options- regular and FPS. Features open, split and locked diff options. Low gearings for offroading and crawling. The regular version also has flexmesh tyres.
Thanks to Box5 for the original meshes and chassis.
Well, to be honest, my last version sucked. This time around it's lighter on fps and actually has rear suspension travel. It's a modified 4 link type setup thats not pretty, but gets the job done. I fixed the engine and painted it camo. I also added a front stinger (kind of) and a better rollcage. This is my last version, as I will now make a CJ8 Scrambler from scratch. Thanks to squatch for the dash.
This is not my work, all credit goes to the originial author of this truck and Box5 for the lift and new look (textures) all I take credit for is repacking this truck so you can drop it into your packs folder
This is not my work, all credit goes to the originial author of this truck and Box5 for the lift and new look (textures) all I take credit for is repacking this truck so you can drop it into your packs folder
offroad8x8.zip
view details
.
Gold
Silver
Bronze
