This is the dumper-version of my Mercedes Kurzhauber. Everything is made by me. Its ropable, so you could also carry it.
Its a bad frameeater, but you can deactivate the mirrors and the mesh-wheels if you ve poor framerates.
Its not already done, but for the moment its some nice stuff i think.
you can connect trailers to the front- and the back-hook
You can lower and lift the supports with F1/F2
You can lower and lift the Dumper with F3/F4
As long as you give me credits, you re allowed do verything you like to and that makes the trucks better.
Using parts of my trucks for your own project surely also allowed, only let the people know who has done the originals.
It was nice to get an PM if you plan to publish it on other sites than these.
Hello! This is my second vehicle release. It is another GTA Ammunation vehicle.
Did you not like the slowness and large amount of weight of the GTA Ammunation Truck?
Then you need the GTA Ammunation Astro!
This vehicle is not in GTA, it's just a custom.
It goes over 140 mph so I don't know the speed, but its fast.
Hydraulics:
F1 Front Down
F2 Front Up
F3 Rear Down
F4 Rear Up
Thanks to Jakebewar for the Hydraulics!
Thanks to Bonehead for the Astro!
The wheels and texture made by me.
HAVE FUN!
This is my first upload to RoR, it is the AmmuNation truck from Grand Theft Auto: Chinatown Wars.
Thank you to Turbocharger for the Chevy!
I made the skin.
WARNING!
If you have light source effects to 'All vehicles, All lights' YOU WILL LAG WHEN USING HEADLIGHTS! The turn signals are fine though.
Included in the pack are 13 versions, 3 Stock Carts, 3 Offroad Carts, 3 Racing Carts,1 Driving Range Cart, 1 Supra Cart, 1 Hummer HX Cart, and 1 Apocalyptic themed golf cart.
All carts are fully meshed, collidable, have fully functioning interiors with gauges and steering wheels, adjustable hitches, and 4 interior cameras plus some other things I may have forgotten to mention.
All components of these carts are done completely by me.
Different carts can be selected upon spawning via the selection system (drop down on bottom of spawn menu).
Compatibility:
0.35 unconfirmed
0.36 does not work(confirmed by mywolfman)
0.37 works (confirmed by me)
0.38 works (confirmed by me)
0.39 works (confirmed by PsychoDog)
0.40 does not work (confirmed by Mythbuster)
A pack of flatcars (standart 40ft, bulkhead 40ft and heavy weight 8-axle), all come with different skins.
The couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
Known bugs:
If you enter a flatcar through the vehicle selection menu game will crash if you try to exit the flatcar, simply change into another enterable vehicle via the menu and exit there.
Thanks to:
sputnik_1 for helping me with adjusting the node/beam.
To Modders:
If you ask permission, I'm fine with it. What I don't need is numerous, random mods made of my content without me being aware of their existence.
Important:
The steering looks like it breaks. It doesn't. That is how it was designed.
It is 10MB because of massive jpg files for textures.
Terrain description:
This is a desert island, it has no roads but tracks are marked with washed-up logs. There is a few very small settlements dotted around the island.
You start on a peninsula in the midde of the bay and drive across the sunken bridges to get to the island.
You'll need a decent offroad car as there's a section where the track dips underwater, and quite a few large mounds in the roads (where I didn't quite do the heightmap right lol)
Credits:
LJFHutch: Every single non-default object in the terrain (most of the objects I have taken from his Greece map).
PsychoDog: The actual terrain.
F1 Terrain Creator: V1.2 uses trees from the F1 Test Track.
Enjoy.
V1.2
Some fixes and improvements to the island. For the full list of all the edits read the readme. The main edits I've made is to the sunken bridges on the penninsula (I've got rid of the log section since that caused some problems when you drove over it) and added a couple more tracks and buildings. Also added some crops to the farmers field so it's not just green ground any more.
Never released Versions 1.1 - 1.19 because I didn't think there was a big enough change to justify a reupload, so this is the first update. Please tell me if I've screwed anything up that was correct in V1 and I'll fix it.
This works best with 0.38.67. If you use 0.39 there may be some extra bugs (e.g. I had a lot of collision problems when I tested with anything newer than 0.38.67) and things may not look quite right. No fixes are planned for obvious reasons (0.4 is going to be the next release, not 0.39).
*PLEASE DELETE THE OLD ZIP (Zyk.zip) BEFORE YOU DOWNLOAD THIS ONE!*
Some slight bugs still exist like the front axle bending when turning.
Pretty good offroad capabilities.
Press "O" when you enter to lock the back door & press it again when the bed is at about 10 degrees
Their is no submesh on the bed yet
Credits:
Kuru for the N/B, Engine, Tool boxes & Fuel tanks
Lenni for the wheels
HRVI for making them
Any questions or what ever PM me or ask on here: Scania-142-Heavy-Hauler-Tipper-(Beta-First-Final-public-release)
Do not release mods without asking me via PM first!
This is an skin for Lenni's Man TGS 32.350 LTF 1060 Crane Truck.
I've skinned it to an "Feuerwehr Kran" With the marking 'KW-065'
This is an fictional skin loosely based off real german fire apparatus.
Beacons flash Blue now!
Uploaded with permission from Lenni and FF Neustadt (For the beacons and horn)
Credits:
Blue beacons and horn: FF Neustadt
Truck and Crane: Lenni and Craneman
Skin, adding blue beacons and horn: Maurice825
Have fun with it!
And please DO share your opinions! I'll try to make the skin better then.
NOTE:
Skin was also updated, forgot to include the AO.
Installing it:
Open the ZIP with WIN-ZIP or WINRAR.
Copy the 'put in original zip' files into your original TLF zip.
its verry heavy around the 75 tons you can tow alot of vehicles whit it
the controls are in the game by pressing the T.
it use wheels on the frontwheels, wheels2 on the rearwheels. For more grip you can use [ and ] to lower the tire presure of the rear wheels
credits:
eminox/HRVI
kuru
auke1
post here your ideas and questions for an next version
Brand and type: Mercedes Benz Atego Sleepwagen ANWB
Ingame name: MB Atego ANWB
Tested in: 0.38.57
This is an Standalone file!
I got permission from Lenni to release this back in April 2011, so I thought this would make a nice addition to the repo.
The ANWB is a dutch company that does most of the towing work in Holland. They basicly control the Roadside assistance branch.
The word ANWB stands for Algemene Nederlandse Wieler Bond.
Starling 911, this is Starling Engine 1 responding. Yes ladies and gentlemen, I this is my first upload, and I have made a skin for the KME Preditor by Cydvx and Pascal. With Cydvx's permission I am releasing it. Now mind you this is a Standalone skin, Instructions are in the zipfile. they should help you.
Credit: Cydvx and Pascal for the original KME and Blank skin
Milan42 (me) for the Starling Engine 1 skin. Hope you like it.
UPDATE
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
UPDATE2
fixed the spelling mistake on the ropables so they all work now
UPDATE 3
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
Here is a skin for the Kenworth T600 and a 2 axle tanker trailer. The skin is based off of fuel delivery trucks for HESS gas stations. I made the skin as close to the actual paint job as possible.
Credits:
Kenworth T600 - HemiBoy95 & Box5Diesel
Tanker Trailer - Trevor
Inspiration - My father
Skins - Venem (me)
These are re skinned trevors peterbilt 359s made to look like western star trucks. i am the skinner to a point, the skull on the side is part of a skin by "marco" so he gets credit for the skins also. i added all the rest. have fun.
Credit- Trevor- Trucks
-Platerpants"me"- skins
-Marco- skulls on skins
ZIL-135 BM-27 Uragan 9P140 launch vehicle and ZIL-135 bare chassis version
UPDATE 2:
- if you downloaded before 2011. december 21. 19:00 GMT (or anytime before this note appearing) please REDOWNLOAD. Otherwise you either won't have the fifth wheel version at all, or the one with bugged wheels. Sorry for the inconvenience.
UPDATE:
- fifth wheel version included. Keep in mind though, that most semi trailers might not fit it because of it's different position compared to normal semi tractors.
- the tires and rims are separate objects now, hence the rims won't flex anymore.
- custom engine sound. Sampled from actual Zil-135 sounds.
- some more skins.
i guess i can say merry x-mas now...
highlights:
- normal mapping
- detailed exterior, flexbody, damage textures
- 8x8 drive with a unique wheel and steering layout
- good off-road capability, and no irrealistic performance
known problems:
- alternate skin selection does not show up the first time you select it, only second time. Must be a RoR caching issue.
- when alternate skin is selected, material flare bindings (lights) do not work. This is confirmed to be a problem with the *.skin system.
thanks to grayson k 95 for the help and thanks to him for letting me skin it this is the ce300 mod orig by grayson it has baldwin havens and original files only i will update it tomorrow or whenever with more skins all credit goes to graysonk95 and 1 % goes to me skinning
this is just a slightly modded version of 1CHEVROLET1's F650 Crawler. all i did was made it have ner rims and made it a little faster. it is also my first mod and upload.
A Dutch skin for the Mercedes Atego Metz aerial firetruck.
It's a skin based on the Mercedes Atego from the fire department of Middelburg, Zeeland in the Netherlands.
I have tried to make it as real as possible, but because this firetruck is an older Mercedes Atego version than the one in use by the firedept. I could not exactly reskin all parts correctly.
I hope you like it!!
Pedro (Atego Chassis)
firepics (Firetruck body etc.)
Lenni (Nodes/Beams)
Ruben (Dutch skin)
Install: Just overwrite the files in this .zip with the .zip of the Mercedes Atego aerial firetruck
This is the finished version of the ERF EC14 Wrecker & Loader that i started many months ago.
It has new UID's so they are standalone to any other version's of these vehicle's.
I have added a winch to the boom now so it is easier to rescue cars. If you find any problems or have any suggestions please post them in the discussion (Link below).
As with the numberplates bieng English i have done them to be realistic & are from the Prefix era. With the 1st letter meaning the trucks age in this case. These ERF's are M reg' so are from 1 AUG 1994 to 31 JUL 1995. http://www.number-plates-car-registr...ion_years.html
I have created the engine to be realistic of a derestricted ERF with a top speed of around 90mph. The engine is more powerful just below its max RPM so when it starts to struggle accelerating just change up a gear & it will keep going.
The Track Network:
-Fully controllable Points (f3/f4)
-Bridges
-Straights
-Left & Right Curves
-Stations
-Goods Loading Ramp
-Collision Meshes
-Custom Non-overwriting N Helens Map
Installation:
-Simply place the .zip in your: My DocumentsRigs of Rodsterrains
-Does Not Overwrite
-Unique N helens map
Credits:
-Custom Sounds from the Free Sound Project
-Original N Helens Map by Pricorde etc.
-Everything else built from scratch by me, Al T.
-Thanks to the beta testers, coco for help with the engine and everyone on IRC for help or suggestions.
Usage:
-Take corners no faster than around 40mph.
-Doors controlled by f1/f2
-Points controlled by f3/f4 from the trains (must be very close)
-Directional Lighting controlled by (,) and (.) or the indicators.
-The trains are allready on the track.
*Do not release a mod of this without my permission*
Well here it is. The official release of my not-so-official FJ cruiser.
I worked nonstop on this car for a year and a half, and gave up about 6 months ago due to just loss of interest.
I had been talking to some friends recently on the forum who said they would really like to see it tidied up
and released. I dont exactly have some long drawn out story about how it got to where it is. It was really just
a huge learning experience. but finally decided to let it go because I lost all of the original files to the mesh.
I suck at writing. So heres a list. :|
Everything-me.
pictures to the left- taken an edited by my main man, Ferrettank!
Known problems are as follows:
Missing quite a few meshes. (Mainly suspension pieces)
Interior is incomplete.
No damage.
And there is a material bug with it on Deags Trail Island map. For whatever reason, the tires are yellow. I cant figure it out...
This was my first try at animated props, flex tires, and flares, so it is what it is! Hope you enjoy it.
Also, modding, do as you wish, post pics as you wish. I dont really care. But if you'd like to release any of your mods (and credit me ;D), please ask my permission first.
Melroe M-880 Prime Mover
This is a prime mover for real heavy loads build out of a former wheeled skid-steer dozer. Like the real thing it does not have any suspension but a lot of power ;-) .
My RoR model features some animated parts like the cooling fans and levers inside the cab as well as some custom sounds.
Mesh and N/B all by me, please do not upload any mods without my permission, thanks :-) .
ok heres an update of my halftrack project still in the process of building so expect more updates
The pack includes the updated cabover and the M3 halftrack, Commands F3 and F4 to help with the turning radius 1942-Half-Track for any comments or questions you may have
If you have the first zip you will need to delete it
Credit goes to me, this is my first pack so please let me know what you think
UPDATE: I've been working on a variation of my own and it's complete, or close enough. It is fully submeshed and will contact with other vehicles(that must to be contactable). It's sides and tail can fold down. The rear rollcage can be lifted using Ctrl+F4/Ctrl+F6. It has ties in the back so you can drive an vehicle into it. Unfortunately all the stuff I added makes it too "tippy" to carry a vehicle into water anymore but driving on land is fine. Also has a trailer hitch that can be completely folded away if you're not going to use it. All controls are listed in-game. Have fun.
This is an Tatra 813 pack I modified from Pricordes original versions and added "Wheels2" to all of the models so you can inflate/deflate the tires. Also updated to work properly in the latest RoRs release as it was having texture issues before. Use [ to deflate and ] to inflate the tires. This is not as easy on your system as the originals were. They were only about 1300 beams before, now each has over 2800 to properly simulate the wheels.
NOTE: You will need to enable advanced wheels in the configurator under the "CPU" tab to enable "Wheels2" in versions older than 0.38.33.
Please note the credits for the crane go josh (1239) who made the original.
This is an essentially imaginary truck made from scratch. I've tried to base it loosely on trucks from the 1930's and 40's but its unique. It has meshwheels, a contactable bed and i've tried to give it as close to real handling as i could. Yes its huge but my sketchup ogre exporter stopped working so i cant resize it.
Credits go to: Fordfan for the chassis and me for the mesh and chassis tweaks.
Features:
-Real weight, real power, real scale. (so don't expect to tow the ror trailers that way a kabillion lbs.)
-Lockers (press W)
-Operational dump bed, & tailgate
-Contactable bed to load vehicles or objects with ties (press O to tie down load)
-Animated winches on all except cargo version, some even have a rear winch.
-Flexbody everything pretty much
-Specular Shader
-Detailed Animated Interior with shifter.
-custom deuce sounds, with added turbo
Known issues:
-Shader shows up black sometimes, restart ROR until it appears normal, or download boring material below and drop in deuce zip.
-5th wheel version breaks when hooking to some trailers
-No flexbody tires (would be way to cpu heavy, it already is)
This is a chevron skin for the international 4700 & tanker trailer by trevor. simply replace the original files with the files in the pack and there you go. enjoy!
This is an 8x8 Offroader based on a MAN-TGA chassis.
It is made for offroading so don't expect it to handle well at high speed.
However, I tried to keep it as highspeed-friendly as possible.
But the main aim is to perform well in rough terrain.
In the readme, there are instructions on how to enable the enclosed wheel meshes.
This vehicle features the "Driving right out of the package" concept.
So put it straight into your data/packs folder and you'll be fine.
Please note that it is my first vehicle and I''m still learning
Credits first of all to Box5diesel for his 1stgens
These do not replace any originals.
Three new meshes for you to have fun with.
Install instructions: For .36 put it into the documents rigsofrods packs folder
For .35 unzip original 1stgen and then unzip this one into trucks folder
Thanks to all who enjoy my mods.
Next update will be new textures and improved chassis for dump box and utility truck.
Issues with trucks: two have the window a little off I did fix it a bit but if you want fix it and pm me.
10bb3UID-rundhauber-dumper.zip
view details
Gold
Silver
Bronze
