This is a Twin Otter with fire sprayers on the bottom, floating submeshes, and a pimpin' paint job. Also has tuned engines. Press G to spray. You must have particals on to spray. You must have water on to float. You must install RoR to run this. Version .32 or later. All credits to me. Might be releasing an update with retractable landing gear and swept wings.
[center]This is a 0.38.67 updated (Original one) Twin otter with fire sprayers on the bottom, floating submeshes, and a pimpin' paint job. Also has tuned engines. Press G to spray. You must have particals on to spray. You must have water on to float. You must install RoR to run this. Version .32 or later. All credits to original author of the updated Fire Otter, Mac_Trekkie.
It has fully retractable landing gear, front landing lights, working wing lights, cockpit view with illuminated gauges, airbrakes. And hopefully everyone enjoys the way it flys. It weighs around 108 ton.
Based loosely on the Pitts-Special aerobatic Bi-plane, this aircraft will perform pretty much every maneuver imaginable, roll, loops, cuban 8's.
The stall is very harsh and will usually result in a "Death spiral", but it usually only happens when the rudder is used violently, kill the engine and hold the nose down and it will regain control.
Controls;
Steer on the ground with the rudder keys Z / X.
The "G" key is used to activate the smoke, which is very cool. [read more]
This is the new version of the Flanker, wich considerably improved performance over it's predecessor and some reasonable graphical updates.
Vectored thrust allows you to controll your plane even during a stall and during acrobatic flying. It's powerfull engines allow you to accelerate rapidly to it's cruse speed of 500 knots and with afterburners supersonic speeds can be attained, and because of it's stability and it's responsiveness to pilot input it is a very easy plane to fly.
Theis is the 1st Gilder in RoR
It don't' have engine (i use an turbo jet with 0.0001 kn powers)
It has got an good Planing
How to fly?:
drag the plane to the air using your mouse
For feedback/Forum link: 1st-RoR-Gilder-asw20 [read more]
this is the first Privat Jet in RoR
this is the beta one it have a lot of bug im going to fix them
you can see here how to fly with it : bombardier-Learjet-45
credit:
Chassis,wings,Positioning: Gboxplaner
Mesh: From A free 3d website ( i lost his url )
Hello NOW im giving you a new FLYABLE! su 27 not salling out like the old one. well it is if you pull up to fast in air Sorry no Loppings. but you can fly it with the cockpit glass open and closed and airbrakes only needs to be engaged during landing or do you want to aproch at 300+ KNOTS NO!! . okay so while in air to turn use the wing ash usualy and engage flaps LVL2 than when you think your done you just disengage flaps and turn the elivators back to center. The climbing will be like a Boeng 727 so no Lopping gona fix that after all its a fighter jet.Hu okay now we got trugh. The rest you see yourself BTW the plane have a visible wight on the front to stabilaize the handling you can just ask me and ile fix to invisible on your version. yes i do special edisions fore private persons.credit to 2883 Arsenic I only made it fly ! And my name is MRC AT SWAT TEAM
This is A Japanese Airline 767. It is matte, not covered in chrome, making it look more realistic (except for those planes with chrome :P ) . Also, There are edited landing gear and turbines, making it look more realistic. I have permission from Box5diesel to release this skin.
Version 2.0 is a complete overhaul of the SU-37 Flanker plane. It's now more stable, faster, more agile and better looking than ever. It now features meshwheels and a flexbody mesh, all using the full potential of the new and improved shading abilities of RoR, to make the plane look as pretty as possible. Like it's real life counterpart it features vectored thrust which means that you are still under controll of your plane even when it has stalled. A definite plus when attempting acrobatic flying.
With the improved flight characteristics it is easier to fly at high and low speeds than ever, making it more pleasant to fly for experienced pilots and easier to get started on for new ones. Share and enjoy!
This is the RoR version .36 update. It now makes use of the new hydros in order to achieve thrust vectoring and I have done some performance tweaks.
Pilots beware: This plane is very powerful and very agile. Be light on the controls and careful with the throttle unless you want it flipping end from end and ripping your own wings off. Of course, if you want to go around doing insane acrobatics like those ( it honestly is a lot of fun ) then ignore this warning.
a pack of 2 twin otters that i added turbojets to. 1 has a set of removable jets under it. use o to lock them in place after spawning. extract file to your trucks folder.
First week of summer, so I decided to finish this. =)
From Wikipedia: "The Lockheed Martin F-35 Lightning II is a single-seat, single-engine, stealth-capable military strike fighter, a multi-role aircraft that can perform close air support, tactical bombing, and air superiority fighter missions. The F-35 has three different models; one is the conventional takeoff and landing variant, the second is short-takeoff and vertical-landing variant, and the third is a carrier-based variant."
The Sukhoi SU_37 "Flanker-F" is a solid turbojet driven acrobatic fighter craft. Due to the vectored thrust system she retains under the controll of the pilot even while stalling.
Changes: - Some minor tweaks to the balance of the plane, trimming some fat, etc. [read more]
This is RC 1.0 of the SU-37 model I have been working on.
It flies quite well and is extremely agile, even at high speeds and very low speeds ( be carefull when steering, it is quite easy to oversteer and stall her ). She can be quite unstable at low speeds, I blame the canards and her heavy tail.
She's still quite fragile so care must be exersized when landing. In flight she is quite solid, the wings will remain rigid even at high speeds. [read more]
Right everyone, this is still highly developmental. Sano, who modified the an12 to my design has claimed the project ?dead? but I hope otherwise. If anyone trys this, finds it fun or whatever and wants to help, please msn, forum post me or w/e.
New version, version 3! Removed some wheels, changed shocks, added unique-id... Discuss here: http://forum.rigsofrods.com/index.php?topic=4102.0 Small BUG! Add these lines to .truck file to beams section! 179, 47, i 178, 47, i 179, 48, i [read more]
New skin for Twin Otter. I have made a skin that it looks like an air Canada plane. I used the real logo of the company. I have also made a new wheel face. Now it looks like real airplane wheels. New .material and .airplane files by me. Just put the downloaded files in your trucks folder. ENJOY IT!!
This is Aortze's DHL skin with new .material and .airplane files by me. Please credit Aortze if you use his skin. Thanks! Installation: Just drop into your packs folder and fly!
This is Aorzte's great Lufthansa AN12 skin with new .airplane and .material files by me so you can have both AN12's at the same time! Installation: Just dump into RoR/packs,and that's it! Please credit Aorzte for his skin should you use it. Thanks!
OLD VERSION!
DHC-6 Twin otter V1!
I just tweaked a bunch of things, I figured it was good enough to release...
I will update to V2 if I make significant changes in the future.
I t flies pretty well, the biggest issue would be that the engines make too much power even at idle so it is hard to land (but if you use full flaps and keep your speed low throughout the approach it works, the other option is to use the reverse to slow down...) [read more]
Make sure you start all 4 engines, flaps are on the main wing in the middle and can be used for heavy steering (tilt 90degrees, full elevator and use flap a bit)
twinotter.zip
view details
: 
Gold
Silver
Bronze
