this guy is a crawler loosely based off of Shannon Campbell's old competition rig.
this was the first mod i ever made- back when i first joined. i recently added a working light-bar, and meshtires from my G2 suv.
apart from that, everything on it is the same- its very simple and has a few quirks that i dont plan on fixing. it may not be pretty,
but it will go up almost any obstacle with ease. i guess youll enjoy this if you have a slow computer like me: power to the n/b!!!!
features:
automatic rear steering, lockers, and lights.
This is the Mercedes Benz Actros 6x6 pack.
This package includes 3 versions:
- version with no upper part
- version for hauling
- version with a plateau with a carcrane
It is version 1.2 in english; version 2.0 already planned..
Some slight bugs still exist like the front axle bending when turning.
Pretty good offroad capabilities.
Press "O" when you enter to lock the back door & press it again when the bed is at about 10 degrees
Their is no submesh on the bed yet
Credits:
Kuru for the N/B, Engine, Tool boxes & Fuel tanks
Lenni for the wheels
HRVI for making them
Any questions or what ever PM me or ask on here: Scania-142-Heavy-Hauler-Tipper-(Beta-First-Final-public-release)
Do not release mods without asking me via PM first!
its verry heavy around the 75 tons you can tow alot of vehicles whit it
the controls are in the game by pressing the T.
it use wheels on the frontwheels, wheels2 on the rearwheels. For more grip you can use [ and ] to lower the tire presure of the rear wheels
credits:
eminox/HRVI
kuru
auke1
post here your ideas and questions for an next version
This is my 1964 Jeep Wagoneer.It is currently a rock crawler/mud truck.The jeep has working hydro's in the rear to stiffen the suspension & it also has a hitch just in case you decide to pull something with it.
Modifications-
1.> All four suspensions works like a charm... Flexing Good.
2.> 4x4 drive with traction control and lockable differentials.
3.> Weight of vehicle is revised.. CG lowered.
4.> Stable Wheels.
you are free to use it for mods or develop on this.
Just remember to give me credit.
This is my "Löschgruppenfahrzeug 16/12" in english a Fire Engine.
You can open the doors of the cabin and the equipment structure with the F1 to F10 key.
In the back of the truck is a hose reel that you should load up.
So you can move the holder up and down with Ctrl+F1 and Ctrl+F2 and you can change the angle of the hose reel (Ctrl+F3 and Ctrl+F4) so its a little bit easier to hook it up (with "O")
Credits: The truck is copletely made by me (the Fire Extinguisher in the cabin is from the Sketchup Gallery and the wheel texture from RoR)
///Deutsch////
Hier ist mein Löschgruppenfahrzeig 16/12 (LF 16/12)
Man kann die Türen der Kabine sowie des Aufbaus mit den Tasten F1-F10 öffnen.
Die Schlauchhaspel hinter dem Auto kann man anhängen (mit der Taste "O")
dazu kann man die Halterung mit Strg+F1 oder Strg+F2 Hoch und Runter Bewegen.
Den Winkel der Schlauchhaspel kann man mit Strg+F3 und Strg+F4 ändern.
Credits: Das Fahrzeug habe ich bis auf den Feuerlöscher und die Textur der Reifen komplett selbst erstellt
Here is my Mercedes Benz SK B1 1224 THW.
It is based on the 16 TLF from FF_Neustadt where I changed the skin and truck file.
The original truck is from FF_Neustadt [read more]
Authors: sirendude 2011 and various members for support.
This is a pack of all of the vehicles I have made in the past 4 months. All of the cars are N/B only, don't have submesh, and some have no engine tuning.
none of these vehicles float, and one car (siren's auto 12x12 special) has all wheel drive, all wheel steer, working reverse lights, headlights, brakelights, and turn signals (flares). Some vehicles have opening hoods and doors.
Vehicles in this pack:
a 6x6 pickup truck called "mud slinger" (includes a Monster Truck version)
a 4x4 pickup truck simply called "pickup truck"
a few muscle cars/ sportscars (they are "highway terror", "lancia delta N/B Car", "tire burner", and "muscle car")
a school bus
a few offroaders ( they are "rock locker", "redneckrickem's dune buggy" (a YouTuber's buggy), "traxxurator"+"traxxurator dump" and "4x4 offroader")
a motorcycle (it has training wheels for stability :P)
and an engine that uses negative shocks to run, just give it a spin with the mouse and it runs. (be careful it explodes after a certain RPM)
You have the freedom to do whatever you want to these vehicles, but give me credits for the vehicle's N/B.
To open a hood or door, press F1 - F4. These commands do different things like open and close a door or hood.
ZIL-135 BM-27 Uragan 9P140 launch vehicle and ZIL-135 bare chassis version
UPDATE 2:
- if you downloaded before 2011. december 21. 19:00 GMT (or anytime before this note appearing) please REDOWNLOAD. Otherwise you either won't have the fifth wheel version at all, or the one with bugged wheels. Sorry for the inconvenience.
UPDATE:
- fifth wheel version included. Keep in mind though, that most semi trailers might not fit it because of it's different position compared to normal semi tractors.
- the tires and rims are separate objects now, hence the rims won't flex anymore.
- custom engine sound. Sampled from actual Zil-135 sounds.
- some more skins.
i guess i can say merry x-mas now...
highlights:
- normal mapping
- detailed exterior, flexbody, damage textures
- 8x8 drive with a unique wheel and steering layout
- good off-road capability, and no irrealistic performance
known problems:
- alternate skin selection does not show up the first time you select it, only second time. Must be a RoR caching issue.
- when alternate skin is selected, material flare bindings (lights) do not work. This is confirmed to be a problem with the *.skin system.
here he is again the caliber ,because it was not on the repository I've uploaded it again
I've updated him, now he has differentials, Antilock Brakes and Traction Control
UPDATE
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
UPDATE2
fixed the spelling mistake on the ropables so they all work now
UPDATE 3
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
this is a heavily modified version of arthur_hucksakes model t.
this is my first mod
it is more controlable. it is 4 wheel drive.
it will go to speeds of 160.
i have slightly mod ified the bode by lengthening the trunk and changed the windsheild.
the ride hight was changed.
the suspension was heavily tuned so now it will go of jumps and go around corners easily.
i have modified the skin and took out the seats also.
UNIMOG 406
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
Disclaimer:
-mods for personal use ok, but don't ask to release your super engine power lift kit mod, or to use the rims/tires on your vehicle to showoff, it ain't gonna happen, yo.
Here is another version of my Ford F-650 I put ford logos on it new rims and a blue strip on the side and that pretty much it. and it won't overwrite the RBP version. It is the same as the RBP truck just skinned differntly. Have fun with it
This is the finished version of the ERF EC14 Wrecker & Loader that i started many months ago.
It has new UID's so they are standalone to any other version's of these vehicle's.
I have added a winch to the boom now so it is easier to rescue cars. If you find any problems or have any suggestions please post them in the discussion (Link below).
As with the numberplates bieng English i have done them to be realistic & are from the Prefix era. With the 1st letter meaning the trucks age in this case. These ERF's are M reg' so are from 1 AUG 1994 to 31 JUL 1995. http://www.number-plates-car-registr...ion_years.html
I have created the engine to be realistic of a derestricted ERF with a top speed of around 90mph. The engine is more powerful just below its max RPM so when it starts to struggle accelerating just change up a gear & it will keep going.
The Track Network:
-Fully controllable Points (f3/f4)
-Bridges
-Straights
-Left & Right Curves
-Stations
-Goods Loading Ramp
-Collision Meshes
-Custom Non-overwriting N Helens Map
Installation:
-Simply place the .zip in your: My DocumentsRigs of Rodsterrains
-Does Not Overwrite
-Unique N helens map
Credits:
-Custom Sounds from the Free Sound Project
-Original N Helens Map by Pricorde etc.
-Everything else built from scratch by me, Al T.
-Thanks to the beta testers, coco for help with the engine and everyone on IRC for help or suggestions.
Usage:
-Take corners no faster than around 40mph.
-Doors controlled by f1/f2
-Points controlled by f3/f4 from the trains (must be very close)
-Directional Lighting controlled by (,) and (.) or the indicators.
-The trains are allready on the track.
*Do not release a mod of this without my permission*
The Volkswagen T3 Van.
You will get some different versions, so you can explore the racetrack as well a deep mud and high mountains.
Versions are:
2WD
Stock Volkswagen T3 van with rear wheel drive. Has a locker in the back for difficult situations like towing a trailer.
2WD Race
A tuned and lowered T3 RWD. It is more light-wight, has a stiffer suspension and a rear locker (split - locked) for a good handling and easy drifts.
4WD Syncro
Stock Volkswagen T3 Syncro with four wheel drive and two lockers (open - rear locked - both locked). It has a special gearbox with a extra low crawler gear and is optionally available with rear wheel steering.
4WD Syncro military
Lifted T3 Syncro with a bit bigger tires and modified bumpers for greater attack angles.
It comes with a camouflage skin to be nearly invisible on Belgium terrain.
Also available with rear wheel steering.
All versions except the race one have a deployable hitch for towing trailers, just attach a camping trailer and go camping
And please don't complain about its boxy look, the real car is as boxy, too.
Commands: press T to see the commands ingame
Rear wheel steering (some versions):
F3 and F4
Hitch:
Press F6 to deploy the hitch from under the car. Use the hitch only when it's deployed!
Press F5 to retract it again.
Update: The Airbrake sound is removed since it doesn't suits a car.
Update 2: - Improved handling and more realistic engine and gearbox settings, now it has realistic power and its real gear ratios.
- New mesh wheels and mesh parts for the race version (from Buttlamo's Vehicle Customization Parts thread).
- New mesh wheels for all syncro versions, big thanks to dmtactical for letting me use the wheels of his Nissan Hardbody.
NOTE:
- This is a project of Silvermanblue and me, so I haven't done all the work. If you like the car, please thank him, too!
- This project is based on a heavily modified highroof van from Trevor, he has full credits for the base chassis.
Credits:
- Mesh wheels (Race version): Cydex
- Air intake, intercooler and exhaust: Beolex
- Mesh wheels (Syncro version): dmtactical
campbellcrawler.zip
view details
Gold
Silver
Bronze
