This is the Mercedes Benz Actros 8x8 pack.
This package includes 8 versions:
- version with no upper part
- cartransporter (+trailer)
- log truck (+trailer NEW!)
- box-truck(+trailer NEW!)
- flatbed (+trailer NEW!)
this is a project i will most probably never Finnish as i started something else instead.
its the 4x4 thing and a custom made crane trailer for it,
the 4x4 thing has 4 wheel steering at low speeds, locked diffs and a steering wheel.
the crane trailer has ropes and a invisible leg, the commands for it are are:
F9-F10 lower and lift the crane boom.
F11-F12 lower lift the invisible foot.
'O' connect load
'L' lock crane trailer to vehicle.
to connect the trailer drive the 4x4thing so the trailers hitch node is above the grease mark on the 4x4 thing and it 'L'
to pick up a load back the crane trailer over it lower it so its with in 1.5m from the object and it 'O' once it connects
and the ropes shorten hit F10 to lift the load of the ground and drive away. reverse order for dropping a load.
the crane trailer is usable on other 5th wheel hitches.
Here's a trailer I made awhile back with a detaching Neck. It can haul some big stuff, has a flexbody deck that bends flat with a heavy load and flexes over bumps. Its not all that finished, but its as finished as its gonna get, lol. I made a video to show how to use it
Ctrl F1 to raise the neck so you can back under and lock on
Ctrl F2 seats the neck on the hitch after you locked on
Ctrl F3 attaches neck to the trailer
Ctrl F4 detaches neck so you can drive it out of the way to load/unload
- Detailed meshes
- Accurate kinematics
- Realistic lifting capacity (refer to the board on the crane!)
Start the engine and put the Crane in NEUTRAL!
- F1/F2: Rotate
- F3/F4: Trolley (use throttle to speed up if needed)
- F5/F6: Hook Up/Down (use throttle to speed up if needed)
- F7/F8: Extend/Retract Jib
- F9/F10: Raised-jib working angle
- Ctrl+F1/F2: Assemble/Disassemble
- Ctrl+F3/F4: Outriggers
- Ctrl+F5/F6: Legs
- Ctrl+F7/F8: Trailer wheel up/down
- Ctrl+F9/F10: Turn trailer wheel
- And as usual lock loads with "o"
You can also see the commands by pressing "T" ingame.
Basical procedure: Ctrl+F4 to fold outriggers; Ctrl+F6 once for legs, Ctrl+1 [NOT F1!] to display the baseplates, Ctrl+F6 again for legs. Then Ctrl+F2 to erect the crane automatically. Jib control is on F7/F8. Jib angle is on F9/F10. Retract automatically on Ctrl+F1.
- sputnik_1: meshes, node and beam, sounds, textures
- BigBoy, Craneman, Lifter, Inviteds, Donators: testing and help, thanks a lot!
here is a set of 2006 Lamar tandem axle trailers me and Crazyjoe made the first one has a ramp for loading cars and tractors and such the secound one has no ramp and is for huling loads like hay bails logs craits or whatever you have that requires a trailer with ought a ramp please place in packs and enjoy. WARNING This trailer is not to be modded withought permission from myself and Crazyjoe.
ctrl+F1/F2 to lift the landing gear up and down
ctrl+F3/f4 to let the rear gate down
O to activate ties once load is on trailer
Jerald9000: node and beam chassis
Crazyjoe: all meshes and mesh wheels
Big thanks to all beta testors
This is the trailer I started a ways back its not done but I am not continuing with it because I am working on something else. I also lost the original unwrap so I have to redo that and really don't wanna redo that. So I figured I would share at least what I have done if some whats to fix/mod what ever do so freely.
Only author is me.
Known problems-handle mesh twitch's, suspension is really stiff, ties are to tight