Hello users of the rigs of rods forum, today I proudly update the FLC. Most of you know what it is, a school bus. many of you might be saying "aw crap, another CE mod." but, this is not the case. This has custom sounds, custom preformance, the ACX mirrors, newly positioned crossing gate, new flares, and new warning lights. credits for original CE go to the following:
So, I'll give you a little background knowledge on this bus.
I always wanted to drive a bus that I, and only I have dreamed of. I figured that I could find something on the site that was cool and wasn't just another CE. so I decided to read up on how to mod Rigs, it was certantly easier than other simulators I've seen in regaurds to modding it. That is how I ended up in this position with this bus. Please note that it is not fully completed so with that said, It still has no interior and only sub-mesh.
This update:
Updated sounds. Hooray! Feaetures the ASP flAilus, Enginefan vervion, and W/O engine fan sounds for the norm.
The newer authors to this bus would include:
Me (tomytom99): sounds, preformance, skins, and moving the crossing gate down.
ROR-EMS: mirrors and mirror placement
Here is the thread for the FLC: [link]http://www.rigsofrods.com/threads/91010-ASP-FLcolumbus-Once-Again-Updated-6-26-12-going-onto-repo[link]
More updates are coming, so be alert! once it is done, the will be a naedox quality video. Note: I will sometimes find a problem that you guys have. Most of the time you will need to find the problem, and I will fix it.
The bus now has about 15 skins, including dealership skins, a blank skin, and a NJDOC skin.
Bugs :O
will crash game in MP and also flatsville, in both sp and mp.
MARS-Craft MX01 Proto
and
MARS-Craft MX01 Proto light
and
every Version (like Polcie and Mars...)
Some general information
Length : 6,32 m
Height : 2,50 m
Width : 4,20 m
Weight : 7,88 T
Engine : Dual V8 with 500 HP
Category : Extrem Terrain Vehicle / Exploration
needed Gravity : adjustable
Max Speed : 30 kp/h
This is My first vehicle in Rigs of Rods
everything is made by me
(texture,mesh,sound,N/B)
F1/F2 = turning
all the other functions you can see in T-Screen
If you want leave a feedback
Thread link : You can get the FPS versions there MARS-Craft-MX01-Proto
2008 KME Predator fire engine, based on the fire engine from Butler NJ.
Features:
- Openable doors and windows
- Tilting cab
- Animated props; driveshafts, light switches, pedals, dashboard needles...
- Can simulate engine torque twisting force (RoR first)
- Comes in 2 versions; caterpillar and detroit, both equiped with allison 5 speed auto transmission
- 22 commands (F1 to Ctrl+F12)
- 9 custom lights (Ctrl+1 to 9)
v1.2
Fixed:
-Default light bar flares showing on the roof when "M" was pressed
-Broken turn signal
-Mirrors are back again
-Meshwheel2
-Added Eminox's engine/gear ratio & driving aids
-Now accept .skinzip files
-Detroit and Caterpillar version are combined into the same .truck file, use the in-game menu to make your choice.
Starling 911, this is Starling Engine 1 responding. Yes ladies and gentlemen, I this is my first upload, and I have made a skin for the KME Preditor by Cydvx and Pascal. With Cydvx's permission I am releasing it. Now mind you this is a Standalone skin, Instructions are in the zipfile. they should help you.
Credit: Cydvx and Pascal for the original KME and Blank skin [read more]
DON'T MODE WITHOUT PERMISSION !
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Small update:
suspension tune
Added flextyres ( Thx to Lifter for approve use mesh file)
added 3 more colors with own mirrors material ( get work mirrors in mp if each takes a different color)
****Please note, this is the updated version. I had posted an earlier version with errors. I was not aware that they would both be posted to the repo. This one is better!
Authors: Bonehead, DT466BusMan, Dodge0359, nelson480, Box5diesel, khadner ,rorlover11, thatsnice ,IC CE300 (If you have worked on any part of the many versions of this bus over the years and have been left out, please let me know and i will add you)
Here is the school bus pack some of you have asked me about. I've changed it up a bit for some variety. Most are Blue Bird bodies but there is a Carpenter and a Thomas as well. They drive pretty realistically.Here is the lineup:
*1986 Blue Bird International S-1800 with an International Navistar 9.0L V8 Diesel and an Allison MT-643 transmission
*1990 Blue Bird International 3800 with an International Navistar DT360 Turbocharged 5.9L Inline six cylinder Diesel and an Allison AT-545 transmission
*1988 Blue Bird International S-1700 with an International Navistar 7.3L V8 Diesel and an Allison AT-545 transmission
*1996 Blue Bird GMC CV200 with a 366ci GM gasoline V8 engine and an Allison AT-545 transmission
*1985 Carpenter Chevrolet C/60 with an 8.2L Detroit Diesel Turbocharged V8 engine and an Allison AT-545 transmission
*1985 Blue Bird GMC 6000 with an 8.2L Detroit Diesel V8 engine and an Allison AT-545 transmission
*2007 Blue Bird International SBCV 3300 with an International Navistar DT466 7.6L Turbocharged Inline six cylinder Diesel and an Allison PTS 2500 transmission
*1979 Thomas International S-1700 with an International Harvester 345ci gasoline V8 engine and an Allison AT-545 transmission
This is a pretty large file and is very sound file intensive. There have been conflicts with the other school bus files with sounds not working properly or at all. These buses are not perfect and do not use any meshes that have not been seen already.
These buses do have seats and realistic parking brake sounds!
Here is my latest Kenworth mod. This is a T600 "Anteater" which was first introduced in 1985 and was Kenworth's first aerodynamic truck and a very radical change from the W900 line. This specific model is powered by a C15 Caterpillar engine with a 13 speed transmission. It features a fully animated interior- guages, shifter, pedals and steering wheel. The truck also has diff locks for hauling heavy loads.
Huge thanks to Box5 for the original W900, Jerald for the sounds, Fidoj for fine tuning and everyone who provided support and motivation along the way.
In the pack is the photoshop file to create custom skins. The ambient occlusion names correspond to the truck names, i.e AO1 = T600_1, AO4 = T600_4, etc. (5 and 1 share AO1). When you save the skin as a .dds be sure you have the right AO layer selected and the others invisible, otherwise it'll be all screwed up.
Features
- Detailed meshes
- Accurate kinematics
- Realistic lifting capacity (refer to the board on the crane!)
Instructions
Start the engine and put the Crane in NEUTRAL!
- F1/F2: Rotate
- F3/F4: Trolley (use throttle to speed up if needed)
- F5/F6: Hook Up/Down (use throttle to speed up if needed)
- F7/F8: Extend/Retract Jib
- F9/F10: Raised-jib working angle
- Ctrl+F1/F2: Assemble/Disassemble
- Ctrl+F3/F4: Outriggers
- Ctrl+F5/F6: Legs
- Ctrl+F7/F8: Trailer wheel up/down
- Ctrl+F9/F10: Turn trailer wheel
- And as usual lock loads with "o"
You can also see the commands by pressing "T" ingame.
Basical procedure: Ctrl+F4 to fold outriggers; Ctrl+F6 once for legs, Ctrl+1 [NOT F1!] to display the baseplates, Ctrl+F6 again for legs. Then Ctrl+F2 to erect the crane automatically. Jib control is on F7/F8. Jib angle is on F9/F10. Retract automatically on Ctrl+F1.
Credits:
- sputnik_1: meshes, node and beam, sounds, textures
- BigBoy, Craneman, Lifter, Inviteds, Donators: testing and help, thanks a lot!
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-FIRE ENGINE (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
Pack now includes 2 P-boom versions.
----------------------------------------------------------------------------------------------------------------
This is the FLK-1500, a strong crawler crane and designed by AIN_002. The crane is not mapped but you can still skin some parts and change colors of meshes. I recommend downloading the skin pack from Rotexx. Uploading your own skin is allowed but please upload it as a skinzip.
Controls:
F1/2 - Rotating the crane
F9/10/11/12 - Moving the tracks
You can view the rest of the commands in the T-screen
This pack includes 6 cranes
- FLK-1500 with 108m boom
- FLK-1500 with 108m P-boom
- FLK-1500 with 58m boom
- FLK-1500-NT with 108m boom
- FLK-1500-NT with 108m P-boom
- FLK-1500-NT with 58m boom
There might be coming more version of this crane like something with a jib but that will be a matter of time.
This zip also includes counterweight for the crane, which can simply be locked to the back of counterweight-arm with L!
Oh and before more people start crying about this: The counterweight can't be lifted off the ground when there is no heavy load in the hook! (which is logical and real!).
Credits: AIN_002 - Started the project/modelled the crane. Rotexx - Did get the sounds for me. Craneman - Finished the whole project. Sputnik_1 - Tuning and helping with the CW trailer
This Pack have a lot of Skinzips for the Heavy Crawler Crane. The Skinzips are for the normal Crane Version - and the Skinzips with "NT" is for the Narrow Track Version.
This is it after a few months: the Seridon Si14 from Seridon Motorhomes
This is my first creation from scratch, and it's a bit oversized. The next versions will be better scaled
In the next update it is colorable
Credits:
Me: n/b and mesh
haselnut116601: support, door n/b and loads of other stuff
rainingheavy: steeringwheel and placement
Scalefreak93: shocks
Nickster 7: wheels
bray: engine settings
I don't remember all the people who helped me, so report it to me if I forgot someone!
Hi there, this a 1984 Kenworth SAR designed and built only in Australia. It has a big 'n' burly Cummins inline 6, backed by an Eaton Fuller transmission with 12 forward gears to get the power where it's needed.
If you have the old version make sure to delete it from your packs folder
NOTE: This is an extensively modified version of Box5diesel's W900. I give massive thanks to him for the original truck and for allowing me to modify it.
There are several different trucks in the pack, however, to save space they all share the same mesh so you can only spawn one of each type at a time, otherwise the materials will collide.
I included the photoshop file in the pack as well, so it easier to make custom skins.
If you find any problems feel free to send me a private message.
Mesh of the uppercabin is made by Craneman
Other mesh parts are made by me
N/B axles are made by Craneman
what you get is:
Terex-Demag ac500 with ssl
Terex-Demag ac500 without ssl
Terex-Demag ac500 with 18m fixed jib
Terex-Demag ac500 with 30m fixed jib
Terex-Demag ac500 with 36m luffing jib
Terex-Demag ac500 with 60m luffing jib
Terex-Demag ac500 with 90m luffing jib
controls:
f1 or f2 = turn left or right
f3 or f4 = boom up/down
f5 or f6 = hook up/down
f7 or f8 = cab up/down
f9 or f10=counterweight systeem up/down press K too see it
f11 or f12=jib up/down
ctrl+f1 or ctrl+f2=boom1 in/out
ctrl+f3 or ctrl+f4=boom2 in/out
ctrl+f5 or ctrl+f6=boom3 in/out
ctrl+f7 or ctrl+f8=boom4 in/out
alt+f1 or alt+f2 = suspension up/down
alt+f5 or alt+f6 = outriggers turn
alt+f7 or alt+f8 = outriggers in/out
alt+f9 or alt+f10 = outriggers up/down
alt+f11 or alt+f12=cab turn
ctrl+alt+f1 or ctrl+alt+f2 = axle 5 lift
ctrl+alt+f3 or ctrl+alt+f4 = ssl up/down
ctrl+alt+f5 or ctrl+alt+f6 = ssl sidemoving
ctrl+alt+f7 or ctrl+alt+f8 = ssl ropes ssl till boomhead
ctrl+alt+f9 or ctrl+alt+f10 =couterweight boom up down only by versions needed with luffing jib
ctrl+alt+f11 or ctl+alt+f12=crab steer
i hope i have write all commands
look at the first post of ac500 topic for pictures how the counterweight systeem work (demag-ac500)
This is the trailer I started a ways back its not done but I am not continuing with it because I am working on something else. I also lost the original unwrap so I have to redo that and really don't wanna redo that. So I figured I would share at least what I have done if some whats to fix/mod what ever do so freely.
Only author is me.
Known problems-handle mesh twitch's, suspension is really stiff, ties are to tight
ZIL-135 BM-27 Uragan 9P140 launch vehicle and ZIL-135 bare chassis version
UPDATE 2:
- if you downloaded before 2011. december 21. 19:00 GMT (or anytime before this note appearing) please REDOWNLOAD. Otherwise you either won't have the fifth wheel version at all, or the one with bugged wheels. Sorry for the inconvenience.
UPDATE:
- fifth wheel version included. Keep in mind though, that most semi trailers might not fit it because of it's different position compared to normal semi tractors.
- the tires and rims are separate objects now, hence the rims won't flex anymore.
- custom engine sound. Sampled from actual Zil-135 sounds.
- some more skins.
i guess i can say merry x-mas now...
highlights:
- normal mapping
- detailed exterior, flexbody, damage textures
- 8x8 drive with a unique wheel and steering layout
- good off-road capability, and no irrealistic performance
known problems:
- alternate skin selection does not show up the first time you select it, only second time. Must be a RoR caching issue.
- when alternate skin is selected, material flare bindings (lights) do not work. This is confirmed to be a problem with the *.skin system.
This is my "Löschgruppenfahrzeug 16/12" in english a Fire Engine.
You can open the doors of the cabin and the equipment structure with the F1 to F10 key.
In the back of the truck is a hose reel that you should load up.
So you can move the holder up and down with Ctrl+F1 and Ctrl+F2 and you can change the angle of the hose reel (Ctrl+F3 and Ctrl+F4) so its a little bit easier to hook it up (with "O")
Credits: The truck is copletely made by me (the Fire Extinguisher in the cabin is from the Sketchup Gallery and the wheel texture from RoR)
///Deutsch////
Hier ist mein Löschgruppenfahrzeig 16/12 (LF 16/12)
Man kann die Türen der Kabine sowie des Aufbaus mit den Tasten F1-F10 öffnen.
Die Schlauchhaspel hinter dem Auto kann man anhängen (mit der Taste "O")
dazu kann man die Halterung mit Strg+F1 oder Strg+F2 Hoch und Runter Bewegen.
Den Winkel der Schlauchhaspel kann man mit Strg+F3 und Strg+F4 ändern.
Credits: Das Fahrzeug habe ich bis auf den Feuerlöscher und die Textur der Reifen komplett selbst erstellt
Here is my Mercedes Benz SK B1 1224 THW.
It is based on the 16 TLF from FF_Neustadt where I changed the skin and truck file.
The original truck is from FF_Neustadt [read more]
This is a fire engine from the fire department Hamburg.
The Original was build from 1994/1995 by Mercedes Benz and Ziegler.
I used the tips from the older fire engines to work over the meshes so that there d´ont be any errors...i hope.
You can open the command list with the button "T" an hook on the hose reel with button "O"
The node/beam chassis and the meshes are build by me.
This pack is my attempt to capture the Streamline Moderne style popular in the 1930s and 1940s. The vehicles are all fictional, but their performance is realistic. I hope you'll enjoy driving them as much as I have enjoyed making them.
1948 Martin T64S "Custom" Tractor
A very low-slung 6x4 tractor. It has independent front suspension with double wishbones and load sharing rear suspension. The engine is a naturally aspirated 12-cylinder diesel driving through a 7-speed gearbox and locking differentials. Overall length is 29 ft, wheelbase 22 ft from front axle to centre of rear axle group, width 102 in, height 14 ft 9 in to tip of smokestacks. Kerb weight is 20,000 lbs, gross combination weight 80,000 lbs.
Fully loaded, the T64S will reach a top speed of 60 MPH with one of the included trailers. It will accelerate from 0-50 MPH in 1 minute, 0-60 MPH taking approximately 2 minutes.
1948 Martin O40 Tanker
A streamlined tank trailer in fictional "Hexaco" livery. Steel unibody, load sharing suspension. Overall length is 40 ft, wheelbase 28 ft from kingpin to axle group centre, width 102 in, height 10 ft 6 in. Loaded weight is 60,000 lbs.
1948 Martin F45 Flatbed
A simple flatbed trailer with stainless steel load deck and load sharing suspension. The deck is submeshed with the rollon flag and has ties to secure loads. Overall length is 45 ft, wheelbase 36 ft from kingpin to axle group centre, width 102 in, deck height 59 in, overall height 79 in to top of bulkhead. Kerb weight is 12,500 lbs, rated load 47,500 lbs.
1948 Martin V59 "Streamliner" Dry Van
A very large and somewhat impractical dry van. It has a streamlined stainless steel unibody and load sharing suspension. Overall length is 59 ft, wheelbase 47 ft from kingpin to axle group centre, width 102 in, height 14 ft 9 in. Loaded weight is 60,000 lbs.
Notes
These have only been tested in Rigs of Rods version 0.38.67.
The wheels have 40 nodes each, and the meshes were made in Sketchup. Don't expect these to be FPS-friendly.
The trailers are roll coupled via the system used by Lenni and Badboy for trailer steering. The centre of gravity and suspension are tuned accordingly; the trailers may topple easily on trucks that lack these nodes.
To minimise rolling resistance, the wheels are pushing the limits of the beam engine. They tend to oscillate when stationary. Caution is advised when stopping or parking on slopes as they may creep.
The trailers have very low drag. The T64S will not pull most other trailers at high speed.
Licence
CGTextures does not allow redistribution of its textures under open source licences. You must remove/replace their texture before releasing modifications of this truck. All other assets used are available for modding. See the readme for specific file information and licensing details.
Features:
Openable rear and side doors
Fully contactible submesh
Ties
Credits:
ElNoobio: kyle and sons skin
Korppi (Kuru): All meshes and N/B, some textures, basic skin
Salonen: better skin, ideas
Nexmartin: Refridgerator texture
Functions
All functions work by press once functionality, also winches, so when you press the extend button once, the winch will keep extending, until you press again.
F5-F6 Front Winch
F7-F8 Rear Winch
F9-F10 Doors
F11-F12 Drop sides
W Diff Lockers (Open, Rear Locked, Both Locked)
N Driving lights
Credits:
3D models, textures, N/B, truck -file and custom sounds are
by Masa
A shader script and a material script are by Box5Diesel.
Core beta testers and useful help: Braskus, Gabester, and many other forum members.
Thanks to all beta testers and to everyone else who helped me at the
forums.
So alot has been updated in this pack, the skin is totally new, the tires are new, the lights are sharper and brighter. A re-bored engine giving 3000 revs more capable of pulling very heavy loads, especially with a new 18 gear transmission. it features abs, tcs, slope brake all custom tuned to fit the trucks.
Box5diesel very kindly has had the trucks to test and they are of his liking. here is a quote.
Yea I think you could post that up, you did some good work on it. I wish all vehicles used slopebrake by default, I love parking on hills and not worrying about it rolling away slowly.
Post it in the mods&skins section of the showroom.
Thank you box5diesel for testing it and glad you like it.
was a problem with previous versions, but now is all fixed
with 24,3m mainboom
with 35,5m mainboom
with 46,7m mainboom
with 57,9m mainboom
with 69,1m mainboom
with 24,3m mainboom and 24,3m jib
with 24,3m mainboom and 35,5m jib
with 24,3m mainboom and 46,7m jib
with 35,5m mainboom and 24,3m jib
with 35,5m mainboom and 35,5m jib
with 35,5m mainboom and 46,7m jib
with 46,7m mainboom and 47,7m jib
the commands are:
f1 and f2 for turn around
f3 and f4 for boom up/down
f5 and f6 for hook up/down
f7 and f8 for jib up_down
f9 and f10 for left track moving
f11 and f12 for right track moving
alt+f1 and f2 for cablift up/down
alt+f3 and f4 for cab up/down
credits or help:
lenni for helping with the tracks
cranedriver for some mesh parts
gamer18 for n/b and mesh
This is the Mercedes Benz Actros 8x8 pack.
This package includes 8 versions:
- version with no upper part
- ampliroll
- cartransporter (+trailer)
- dumper
- log truck (+trailer NEW!)
- box-truck(+trailer NEW!)
- flatbed (+trailer NEW!)
- trail-truck
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second TANKER TRUCK with WATER CANNON (MB NG 80)
-Fire Engine (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-TANKER TRUCK (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-Fire Engine (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
Hello, I decided to make some new versions to Arthur Hucksake's P30 stepvan. Their are 8 skins all with new features.
Skins:
- A Thomas built buses school bus
- A Blue Bird Lake County Prison System transport bus
- A rusty old U.S. Extradition service bus
- A Sun Charter Company coach
- An Invis45 Customs Stepvan.
- A U.S. Forestry van
- A church bus
- A tow bus
Features
- Detailed meshes
- Animated cab
- Realistic buffers, coupling, suspension
- Custom sounds
Instructions
- Click here for a tutorial how to couple
- F4 Wipers
- F5/6 coupling in the back
- F7/8 coupling in the front
- F9/10 coupling bar length in the back
- F11/12 coupling bar length in the front
- Ctrl + 1/2: Lights
- Ctrl + 3: speedo illumination
- Ctrl + 4: interior lights
Credits:
- sputnik_1: meshes, node and beam, sounds, textures
- BigBoy: much help and testing, thanks a lot!
- The Inviteds: testing
Not compatible with BigBoys Bombardier ALP!
Update: Now including the blue and red skin. Please notice: The flares don't work when you choose the blue or red skin!
Unimog U5000 (Beta)
Philzilla and I have been working on the Moggy for a while and its ready for a beta release. The mesh is accurate to its real life counter part. Although the paint job and back end is completely custom.
The real one is used for: "Dakar", "Truck trials" and "Rallye" the price tag is about $80,000 USD (good thing we have simulators :P) I will let the Pictures do the rest of the talking. I made the detailed mesh and Node and beam chassis and Philzilla made the awesome "Dakar" suspension and some of the chassis for it.
Features
Philzilla's suspension
Extremely detailed 3d mesh
High resolution texture
Custom paint job
full interior
full Damage
Bugs
It does have its bugs
missing steering wheel,
few inverted faces and
the front axle does not move when it terns
Feel free to make skins or mods for the Unimog as long as you give credit.
Thanks to Aivar for finding the bugs that caused the 0.38.xx crash
Enjoy ;D
Here it finally is! The Bombardier ALP-45DP dual powered locomotive.
It comes in two different liveries, AMT (Canada) and NJT (USA).
Both a version of the locomotive in diesel and in electric mode is available, only difference are the sounds and the removed exhausts on electric version.
Please carefully read the instructions BEFORE posting useless questions:
Spawning:
Use the train spawner placed on the map (small building where it says "Trains") or place it on a straight track piece via the .terrn file, DO NOT spawn in the truck spawner this will not work.
Controls:
The ALP uses default truck controls. Always stay in automatic-transmission, it will not shift in the second gear!
F5/F6: to rais or lower the pantograph.
CTRL + 1: change directional lighting
CTRL + 2: front ditch lights
CTRL + 3: front lights
CTRL + 4: rear ditch lights
CTRL + 5: rear lights
CTRL + 6: wipers
(Un)Coupling:
The knouckle couplers couples other trains (using the same coupler, of course...) like other ALP's automatically. When coupled, both carriages are connected to each other ingame. If you want to uncouple two carriages, you need to unlock couplers on BOTH carriages in between you want to uncouple. The ALP has a small lever next to the rear knuckle coupler (with a lock/unlock-sign next to it) that can be grabbed by mouse. Pull to "unlock" position on both carriages and done. Not that complicated.
Thanks to:
sputnik_1 - Without him this would not have been possible. He made trains actually work in Rigs of Rods (as you will see after reading this and testing the locomotive), outgoing from donoteats basic layout design. Furthermore he helped a lot with tweaking the ALP, to make it drive as good as it does. Many many thanks mate!
donoteat - He once had the idea to bring trains to RoR and made the great layout we are now using.
And thanks to the inveted members who tested this!
Update:
Added ropables so it can now be lifted with a crane.
Errors:
Game might crash when you want to couple two ALP's, to avoid this disable high quality refelctive effeckts!
thanks to grayson k 95 for the help and thanks to him for letting me skin it this is the ce300 mod orig by grayson it has baldwin havens and original files only i will update it tomorrow or whenever with more skins all credit goes to graysonk95 and 1 % goes to me skinning
A Dutch skin for the Mercedes Atego Metz aerial firetruck.
It's a skin based on the Mercedes Atego from the fire department of Middelburg, Zeeland in the Netherlands.
I have tried to make it as real as possible, but because this firetruck is an older Mercedes Atego version than the one in use by the firedept. I could not exactly reskin all parts correctly. [read more]
Update! Placement has changed!!! Remove all old files of this crane, even those in your map zips!!! Please read the Readme included in the zip file for a detailed installation description, controls and other useful information! You need RoR >V0.38.33!
Some features:
- Two versions: the crane itself and the crane mounted in a warehouse
- Two independently controllable crane bridges with collision protection
- A big load spawner for the crane itself
- One truckspawner and three loadspawners in the warehouse
- All warehouse doors are openable
- Meshes with ambient occlusion
New in Version 3:
- File cleanup, that means you need to change your *.terrn file a bit. Check the manual!
- Updated meshes and textures
- A new train version
- Many N&B tweaks
- All commands adjusted: you can now use the throttle to speed them up
A big thanks to BigBoy and Craneman for testing and Bugfixing!
Support Thread
You will find the old version as well as Flatmap with the crane placed on it there.
UPDATE
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
UPDATE2
fixed the spelling mistake on the ropables so they all work now
UPDATE 3
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
DS9 Off Shore Crane - Science Research & Salvage
Belongs to the DS9 Submarine!
It features:
- a 2-bridged overhead crane on the water
- sidewarts extendable main booms to unload onto the land
- a car/cargo deck that can lock down loads and cars.
- a car ramp to drive on/off with vehicles..
- hooks that go under water to pick up sunken ships or loads
- side-thrusters for better manuverability
- underwater flares to see what you lift at night..
it can lift/transport/unload at least 70 tons!
I haven't tried heavier stuff..
This Crane is opensource - do with it as you like..
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-Fire Engine (MB NG 80)
-EQUIPMENT TRUCK (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
UNIMOG 406
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
Disclaimer:
-mods for personal use ok, but don't ask to release your super engine power lift kit mod, or to use the rims/tires on your vehicle to showoff, it ain't gonna happen, yo.
So this is the new version of the "highliner" double deck EMU, commonly found on the Metra Electric lines in Chicago. This is a 2 car arrangement only. 4, 6 and 8 car versions are in development however, there seems to some issues with nodes2 and slidenodes.
Features:
-Working Doors F5/6/7/8
-Working Pantographs F9/10
-Custom Sounds
-Unfinished Cab Interior
-Flares
-Realistic(ish) acceleration and top speed
Installation & Safe Usage:
-Place the file "highliner.zip" in the packs folder.
-Don't drive round very sharp corners over 30mph.
-Don't try and switch tracks over 50mph.
-Don't try and couple this to any other train. I know it's tempting but it's an EMU you idiots.
-Support/Comments: Forum Thread
-To spawn on train valley add this line to the .terrn:
Added:
- Working wipers ( F12)
- Front window can now be opened ( F9/10)
-------------------------------------------------------------------
This is the new version of my old towercrane, I improved the whole N/B part and the whole crane acts more like in real life now, I also improved all mesh parts and added a hook-cam, it is also possible to skin the crane now. The crane can be spawned by the menu or just place it on a map.
Hello, I'm here to show a skin that created the MB Atego COMAX, with permission of the coco, the company's Brazilian postal service called Correios or Sedex.
Show some pictures and hope you like it.
Credits to Coco and Pedro, creators of the vehicle.
here is my Mack dump truck
credit
meshes,skins,nodes and beams,engine: negativeice
engine,skins Darthcain
sounds;voulk ( not used because i got better ones from jerald9000)
sounds:jerald9000
download the skinzip for more skins
controls are :
f1-f2 tilt hood
f3-f4 dump
f5-f6 raise/lower etra axle
UnimogU5000Dakar.zip
view details
, please rate and comment
Gold
Silver
Bronze
