This is my Spierings crawler crane with 60m jib. It is able to lift 2t at the end of the jib! It is possible to give the jib an angle, And the elevator on the side of the tower can move up and down. It is also possible to edit the side panels for skinning and the main color can be changed.
Notice: First shift to the Reverse gear and then back to Neutral!
Controls:
F1/ F2: Rotate superstructure
F3/F4: Move trolley
F5/F6: Hook up/down
F7/F8: Jib angle F9/F10: Move left track F11/F12: Move right track
Ctrl+F1/F2: Elevator up/down
Don't complain in the thread about that it doesn't move or something because then you didn't read the description!
Credits:
Lenni: Helped me a lot with the n/b tracks! (thank you for that)
Bcazbobby: Helped me with fixing some bugs.
New
Added some copyright file to the zip, since someone found it necessary to use my mesh without permission for another game.....
This is the Liebherr LTC 1045-3.1. It's a small compact crane which can lift 45t at close range.
The crane is fully skinable and you can download the PDN files here You are allowed to release new skins onto the repo but please make it a .skinzip!
Be sure you got an up to date RoR version
Credits:
- Lenni for mapping the whole crane and his tons of work on finishing this project!(Mirrors, flares and N/B fixes!)
- AIN_002 for editing meshes and bug fixes on the N/B
Controlls:
You can also find the controls by the T-screen. (just press T in-game)
This is an skin for Lenni's Man TGS 32.350 LTF 1060 Crane Truck.
I've skinned it to an "Feuerwehr Kran" With the marking 'KW-065'
This is an fictional skin loosely based off real german fire apparatus. [read more]
Just the 3 files from the ZIP folder to replace the original files in the Sennebogen folder at the PACKS folder , and you've got a "H N Krane" Sennebogen 5500
Just the 3 files from the ZIP folder to replace the original files in the Sennebogen folder at the PACKS folder , and you've got a "FRANZ Bracht" Sennebogen 5500
This Pack have a lot of Skinzips for the Heavy Crawler Crane. The Skinzips are for the normal Crane Version - and the Skinzips with "NT" is for the Narrow Track Version.
You can use ONLY ONE Skinzip in the Game! And ONLY ONE skinzip in the PACKS folder! If you want to use another skinzip- delete the old skinzip in PACKS.
Press "O" to use ties and hook in 4 points (needed if you want to rotate the load)
or
Presss "L" to hook in 1 point
Note: to enter the crane, you need to be placed under the cab; and if the crane is on the stabilizer, you'll need to jump to enter. the cab is a little high
Liebherr LTM 1220 Custom, Version 1.1
Abstract: a beefier mobile crane was needed to complete certain tasks, such as heavier loads than previously and more stability when transporting an attached heavy load. Ideas that spawned and were implemented include overhead tower elevator hydraulics instead of the boom underside elevator hydraulics that were weak under heavy loads, ties for the crane rotating base to the vehicle frame for less wobbliness under heavy loads and movement yet allowing disconnection so the crane base can rotate, wider wheels for potentially better traction and less wheel breakage when making a turn over curbs, higher total weight for physically better stability, and strategically located heavy load nodes once again for more stability. Intended for RoR v.0.34; use of specific mass load nodes are new to this version and important for optimum functionality of this crane.
;REVISION 0235.28.1.08 //Time (24 hrs).Day.Month.Year
;original by Pricorde, "Custom" package modifications by DSwan (TruckMax)
;Custom Trim by DSwan includes:
;Wider wheels, increased total weight, tuned dynamic weight distribution, crane base lockers, new boom elevators, new supplemental front wheels, modified engine & tranny (better range--ultra-slow creeper gears to cruising highway gears), other minor modifications
;Custom package effects:
;More stability during loading process and loaded movement, up to ~45 Tons can be lifted effectively, in practically (vs. ~20 Tons w/original version), better traction under all circumstances, especially loaded. Version 1.1 removes the hydraulic feet and replaces them with wheels, which can be deployed while moving a heavy object. The vehicle is FAR more stable while moving a heavy load now; Version 1.1 is rated to effectively haul 30 tons up to 30 km/h @ < 15% grade. Before Version 1.1, the stats were 25 tons up to 25 km/h @ < 10% grade.
A Final Word (same note from Liebherr Custom v.1.0): Thanks for a great mobile crane Pricorde! Expect version 2.0 by February 1 -- enhances may include wheels on the extending feet for awesome stability when transporting heavy loads, rear supplemental wheels like the front supp. wheels, wider stance, more crane structural reinforcement, custom rims, hydraulically adjustable counterbalances, and more! A revision, i.e. v.1.1 or so, may be released between now and then testing functionality of upcoming features and/or fixing problems with version 1.0.
Liebherr LTM 1220 Custom, Version 1.0
Abstract: a beefier mobile crane was needed to complete certain tasks, such as heavier loads than previously and more stability when transporting an attached heavy load. Ideas that spawned and were implemented include overhead tower elevator hydraulics instead of the boom underside elevator hydraulics that were weak under heavy loads, ties for the crane rotating base to the vehicle frame for less wobbliness under heavy loads and movement yet allowing disconnection so the crane base can rotate, wider wheels for potentially better traction and less wheel breakage when making a turn over curbs, higher total weight for physically better stability, and strategically located heavy load nodes once again for more stability. Intended for RoR v.0.34; use of specific mass load nodes are new to this version and important for optimum functionality of this crane.
;REVISION 0325.26.1.08 //Time (24 hrs).Day.Month.Year
;original by Pricorde, "Custom" package modifications by DSwan (TruckMax)
;Custom Trim by DSwan includes:
;Wider wheels, increased total weight, tuned dynamic weight distribution, crane base lockers, new boom elevators, new supplemental front wheels, modified engine & tranny (better range--ultra-slow creeper gears to cruising highway gears), other minor modifications
;Custom package effects:
;More stability during loading process and loaded movement, up to ~40 Tons can be lifted, in practically (vs. ~20 Tons w/original version), better traction under all circumstances, especially loaded
A Final Word: Thanks for a great mobile crane Pricorde! Expect version 2.0 by February 1 -- enhances may include wheels on the extending feet for awesome stability when transporting heavy loads, rear supplemental wheels like the front supp. wheels, wider stance, more crane structural reinforcement, custom rims, hydraulically adjustable counterbalances, and more! A revision, i.e. v.1.1 or so, may be released between now and then testing fuctionality of upcoming features and/or fixing problems with version 1.0.
Project TATRA 815 CKD AD-28 is finally COMPLETE.
You can download it and have fun with this crane.
COMMAND for use:
F1 - F2 : rotation crane tower
F3 - F4 : lift arm
F5 - F6 : disengagement arm
F7 - F8 : spooling hook
ctrl + F1 - ctrl + F4 : disengagement/clutch shelf
ctrl + F5 - ctrl + F12 : dusebgagement/clutch shelf (up/down)
Before you start drive you must locked hook nose oof cabin, because it will cradle. For locked use button "L" and locked arm button "O".
UPDATE
-front legs cylinders are stronger
-front tires are stronger
-use wheelmesh
-visuale bugs of hinge points fixed
-change what of color
-legs visual better
-added jib version
PALLETLIFTER
hook A pallet press ALT-f12 ,unhook the pallet press ALT-f11
For the first start the hook is on ,so you have nothing to do.
You can pickup the palletlifter with press h (this crane has an hook-node in the hook) or O just for other cranes.
LOADING BOX
Drive the truck under the box ,it will automatic hook the box .
Press CTR+ALT f1 for legs in .
For unhook the box press ALT+L
LEGS
alt+ f1/f2 legs left in/out
alt+ f3/f4 legs right in/out (use right alt ,left the game will close)
alt+ f5/f6 legs left in/down
alt+ f7/f8 legs right up/down
alt+ f9/10 leg front up/down
ctr+alt f1/f2 legs loadingbox up/down
BOOMS
ctr+ f1/f2 boom1 in/out
ctr+ f3/f4 boom2 in/out
ctr+ f5/f6 boom3 in/out
ctr+ f7/f8 boom4 in/out
ctr+ f9/f10 boom5 in/out
ctr+ f11/f12 boom6/7/8 in/out
f9/f10 jib booms in/out
f11/f12 manual jib booms in/out (works only when the hook is not loaded)
HOOK LOADS
L hook /unhook trailerhook or cranehook
alt+ F11/F12 unhook/hook palletlifter
O hook a load
LEGS
ctr+f1/f2 legs left unfold
ctr+f3/f4 legs right unfold
ctr+f5/f6 legs left in/ out
ctr+f7/f8 legs right in/out
ctr+f9/f10 legs up/down
alt+f5/f6 rear legs cylinders do not turning more (not important ,in real these cylinders are in most of time down.)
Craneman-Spierings60m-Beta-2.zip
view details
Gold
Silver
Bronze
