made for RoR Terrains: 0.36*, 0.37, 0.38, 0.39* | Trucks: 0.37*, 0.38, 0.40
*Possible or partial compatibility. Not guaranteed to work.
I'm finally getting around to releasing this, since I don't plan on doing anything more to it.
IMPORTANT! If it crashes on the first launch after installing the zip, then re-start ror and it should work fine. IMPORTANT! To run the snow map, you need to run RoR as an administrator.
Derbymutt's Offroad Course
Derbymutt's Snow Course
Derbymutt's Baja Trail Truck
Derbymutt's Hummer Trail Truck
The overall inspiration for these maps and cars was the old 1997 game Test Drive: Off-Road.
The Offroad course features Angelscript races and ambient sounds and particles.
The Snow course features realistic snow physics and nice calceum settings.
Derbymutt's Offroad Course - Desert 1: [Multiplayer Leaderboard]
- Trailblazer [Multiplayer Leaderboard]
- Main Track [Multiplayer Leaderboard]
- Mud Pit [Multiplayer Leaderboard] Author: Derbymutt
-Maps created with Unity 3D 2.6
-Maps Splatmapped with Unity 3D 2.6
-Maps A/O Baked with Unity 3D 2.6
-Splat Tilesets created in PDN
-Vegetation textures created in GM8 Pro
-Particle textures created in GM8 Pro & PDN
-Sounds mixed in Audacity
-Tree Meshes created in Sketchup 8
-Wind sounds created in Audacity
-Custom Material Shaders
-Calceum sky settings
-Vehicle meshes created in Blender
-N/B's based on modifications to my Baja buggy n/b
-Tire meshes created in Sketchup 8 and finalized in Blender
-Vehicle Textures created in PDN
-V8 Hemi created in Sketchup 8 and finalized in Blender
-Various Vehicle meshes created in Sketchup 8
-Various Vehicle textures created in GM8 Pro & PDN
-Hud created in PDN
-Sign mesh created in Sketchup 8
-Sign textures created in PDN
-Pyramid mesh created in Sketchup 8
-Checkpoint barrel mesh created in Sketchup 8 and finalized in Blender
-Barrel mesh created in Sketchup 8 and finalized in Blender
-Barrel textures made in Blender
-Checkpoint gate mesh created in Sketchup 8 and finalized in Blender
-Checkpoint gate textures created in Microsoft PowerPoint 2007, PDN, and Blender Author: Stock assets (CC/public GNU/Royalty Free)
-Tree textures: Google stock assets
-Pyramid textures: Google stock assets
-Animal sounds: YoYoGames stock assets
-Vehicle sounds: RoR stock assets Author: Miura
-Base Splat Material from Wiki
Well this is my truck, i started it the day of thanksgiving. I have been working pretty hard, i have put much time into detail and it paid off, i like it and i hope you like it too.
-very fps frendly
-first fully animated engine all the way to the axles
-soft tires with a lot of grip
-fully animated interior
-non conflicting materials between trail truck and the truggy
-it is ok to mod and uses meshs for other projects.
-a bit under scale
-very slow (as in speed)
-no AO bake
-no skin able body, besides color
;now has better fps due to smaller png's thanks to hotrod!
;also now has mp versions for both truggy and trail truck. (no performance changes, besides better fps) wheels are still flexbodywheels!
Here it finally is! The Bombardier ALP-45DP dual powered locomotive.
It comes in two different liveries, AMT (Canada) and NJT (USA).
Both a version of the locomotive in diesel and in electric mode is available, only difference are the sounds and the removed exhausts on electric version.
Please carefully read the instructions BEFORE posting useless questions:
Use the train spawner placed on the map (small building where it says "Trains") or place it on a straight track piece via the .terrn file, DO NOT spawn in the truck spawner this will not work.
The ALP uses default truck controls. Always stay in automatic-transmission, it will not shift in the second gear!
F5/F6: to rais or lower the pantograph.
CTRL + 1: change directional lighting
CTRL + 2: front ditch lights
CTRL + 3: front lights
CTRL + 4: rear ditch lights
CTRL + 5: rear lights
CTRL + 6: wipers
The knouckle couplers couples other trains (using the same coupler, of course...) like other ALP's automatically. When coupled, both carriages are connected to each other ingame. If you want to uncouple two carriages, you need to unlock couplers on BOTH carriages in between you want to uncouple. The ALP has a small lever next to the rear knuckle coupler (with a lock/unlock-sign next to it) that can be grabbed by mouse. Pull to "unlock" position on both carriages and done. Not that complicated.
sputnik_1 - Without him this would not have been possible. He made trains actually work in Rigs of Rods (as you will see after reading this and testing the locomotive), outgoing from donoteats basic layout design. Furthermore he helped a lot with tweaking the ALP, to make it drive as good as it does. Many many thanks mate!
donoteat - He once had the idea to bring trains to RoR and made the great layout we are now using.
And thanks to the inveted members who tested this!
Added ropables so it can now be lifted with a crane.
Game might crash when you want to couple two ALP's, to avoid this disable high quality refelctive effeckts!
Trailer P-32 is designed for quick transport wheeled and tracked vehicles and other material to the weight of 40 tons. In an emergency, up to 46 tons, maximum speed may be 10 km / h Is designed for off-set with tractor on roads I to III. class, the roads are paved and after tolerable terrain without external imbalances and obstacles.
Technical and tactical data
- Total length (including shaft): 9475 mm
- Overall height: 1420 mm
- Height of the loading area: 1000 mm
- Overall width: 3100 mm
- Wheelbase: 4410 mm + 1000 mm
- Length: 4900 mm
- Width: 3100 mm
- Standby: 10,600 kg
- Payload: 40,000 kg
Do not edit the MESH in any way shape or form without my permission. If you want to use
the n/b all I ask is that you PLEASE consult with me first. Public or private. You are free
to make custom colors, change the motor, wheels, etc. But do not edit the verts on anything
here in this zip.
darn_it: Main 440 engine and U-joints
eclipse/faustknight: Rear Dana 60
ADR's Carmageddon 2 cars: Some textures
Mythbuster: Support, a lot of testing, and being there for rebounding ideas.
Jaw-4: Testing, support, and being someone to talk to.
PRT-Audiman: Sound and tuning help
Jaimswallace: Awesome teaser video
Dkutch: Everything else.
This is something that I've been meaning to make for quite a while, a revamped version of my first scratch-made creation for RoR.
Working suspension parts
Working lights, courtesy of the materialflares system
Opening ramp (Ctrl+F3/F4)
Working jack, to make trucks of most heights haul this (Ctrl+F1/F2)
Lots o' ties to keep the most unruly load secure (ropables not included and must be present on the vehicle you are securing)
Plenty of room for even the biggest of your toys (10ft wide x 11ft tall, and 20ft long. It also comes in a 26ft long version)
DODGE charger (Me) - Everything
Off-Roader, Excisionized, and ShawnVallance - Beta Testing (A big thanks to them)
Added moving jack
Fixed gap issues with the ramp
Made a basic colors skinpack (Includes Black, White, and Blue skins)
Made an official Dura-Built skinpack
Increased stability of trailer (Doesn't shake as easily)
Hi! i have recently received permission to release this and I am proud to present you guys with my version of LILGTI and FERRETTANK'S FJ40 . EVERYTHING you see on this truck is from the original truck itself and made by the ORIGINAL authors except for the simex tires and control arms done by me and. I edited the .truck file and some meshes to make everything fit.
PLEASE CHECK FORUM FOR THE LATEST UPDATES! FJ-40-mod
TRUCK 1 LongJ (truggy)
- stretched body and frame
- 4 link suspension upgrade
- FATALFIE wheel beems
- shock monts for the frame
- large simex tires
TRUCK 2 long normal
i made this to have a more stock look
- larger scale leaf springs
- spring over axle conversion thingy
- slightly smaller simex tires
alot of thanks to the original authors
lilgti and ferrettank
thanks to fatalfie for his wheel beams!
you may have to move the original truck file for the skins to work but thats it! its pretty stable
i forgot to include the tuber version all credits go to the same people
fixed window and body placement on the tuber
No more updates
These are re skinned trevors peterbilt 359s made to look like western star trucks. i am the skinner to a point, the skull on the side is part of a skin by "marco" so he gets credit for the skins also. i added all the rest. have fun.
Credit- Trevor- Trucks
-Marco- skulls on skins
YOU MUST HAVE AT LEAST 0.38.33 TO USE THIS CAR. THIS CAR WILL NOT WORK WITH AN OLDER VERSION.
Updated with modeled panel gaps! Fixed UV mapping on Army version!
1949 Ford by Gabester
The 1949 'Shoebox' Ford was the first all-new design to come out of Ford after the war, featuring a stylish aerodynamic body shape and sophisticated independent front suspension.
Separate detaching parts (hood, fenders, doors, trunk, headlights, and bumpers)
Five versions (Club Coupe, Moonshine Special, Tudor, Fordor, and Indiana Jones US Army)
DO NOT modify this without my permission.
You need a fast computer to handle this car. Requires .38.33.
This pack is my attempt to capture the Streamline Moderne style popular in the 1930s and 1940s. The vehicles are all fictional, but their performance is realistic. I hope you'll enjoy driving them as much as I have enjoyed making them.
1948 Martin T64S "Custom" Tractor
A very low-slung 6x4 tractor. It has independent front suspension with double wishbones and load sharing rear suspension. The engine is a naturally aspirated 12-cylinder diesel driving through a 7-speed gearbox and locking differentials. Overall length is 29 ft, wheelbase 22 ft from front axle to centre of rear axle group, width 102 in, height 14 ft 9 in to tip of smokestacks. Kerb weight is 20,000 lbs, gross combination weight 80,000 lbs.
Fully loaded, the T64S will reach a top speed of 60 MPH with one of the included trailers. It will accelerate from 0-50 MPH in 1 minute, 0-60 MPH taking approximately 2 minutes.
1948 Martin O40 Tanker
A streamlined tank trailer in fictional "Hexaco" livery. Steel unibody, load sharing suspension. Overall length is 40 ft, wheelbase 28 ft from kingpin to axle group centre, width 102 in, height 10 ft 6 in. Loaded weight is 60,000 lbs.
1948 Martin F45 Flatbed
A simple flatbed trailer with stainless steel load deck and load sharing suspension. The deck is submeshed with the rollon flag and has ties to secure loads. Overall length is 45 ft, wheelbase 36 ft from kingpin to axle group centre, width 102 in, deck height 59 in, overall height 79 in to top of bulkhead. Kerb weight is 12,500 lbs, rated load 47,500 lbs.
1948 Martin V59 "Streamliner" Dry Van
A very large and somewhat impractical dry van. It has a streamlined stainless steel unibody and load sharing suspension. Overall length is 59 ft, wheelbase 47 ft from kingpin to axle group centre, width 102 in, height 14 ft 9 in. Loaded weight is 60,000 lbs.
These have only been tested in Rigs of Rods version 0.38.67.
The wheels have 40 nodes each, and the meshes were made in Sketchup. Don't expect these to be FPS-friendly.
The trailers are roll coupled via the system used by Lenni and Badboy for trailer steering. The centre of gravity and suspension are tuned accordingly; the trailers may topple easily on trucks that lack these nodes.
To minimise rolling resistance, the wheels are pushing the limits of the beam engine. They tend to oscillate when stationary. Caution is advised when stopping or parking on slopes as they may creep.
The trailers have very low drag. The T64S will not pull most other trailers at high speed.
CGTextures does not allow redistribution of its textures under open source licences. You must remove/replace their texture before releasing modifications of this truck. All other assets used are available for modding. See the readme for specific file information and licensing details.
This is a MB Car Rental skin for Wabash Duraplate trailer.
NOTE: unzip and put all the files but the read me in the WabashDuraplate.zip
Authors: Nadeox1 (trailer), Mitchieboy (MitCity's MB Car Rental)
link for Nadeox1's Wabash Duraplate: 53-Wabash-Duraplate
link for MitCity by Mitchieboy: http://www.rigsofrods.com/repository/view/4904
Update: Removed Financial centrebit
Thanks to Mitchieboy® for telling me about that.
This is a Cushman Industrial Vehicle similar to the Titan series. This is my first truck (besides the tutorial), so please give feedback. It has a custom dash, custom sounds, and is fully sub-meshed. I also tuned the engine best I could to mimic an electric motor, and it is only about 100 kilos away from the real vehicle weight. Mods are welcome, and encouraged, just remember to give credit. Enjoy!
-Stiffened the shocks slightly for a better ride. (Still fun though)
-Added two new skins, Red and Blue.
-Reduced stalling when switching gears, or under high load.
-A few other niceties.
Added some copyright file to the zip, since someone found it necessary to use my mesh without permission for another game.....
This is the Liebherr LTC 1045-3.1. It's a small compact crane which can lift 45t at close range.
The crane is fully skinable and you can download the PDN files here You are allowed to release new skins onto the repo but please make it a .skinzip!
Be sure you got an up to date RoR version
- Lenni for mapping the whole crane and his tons of work on finishing this project!(Mirrors, flares and N/B fixes!)
- AIN_002 for editing meshes and bug fixes on the N/B
You can also find the controls by the T-screen. (just press T in-game)
This is the final and last version of Nissan 350Z for Rigs of Rods.
Even if the original submesh model of this car is more than 2 years old its still a headturner!
Since then I edited the nearly everyday to make it look, sound and feel like its real counterpart.
Here are the most important notes:
- the body and suspension is a RoR classic setup made out of a nodes, beams and a submesh
- the engine is tuned to behave like the original one
- the transmission should be shifted manually and has real gear ratios
- the car can easely go to 250 km/h
- the suspension is set up for both drifting and highspeed stability
- the sounds are carefully collected and mixed so can get that good V6 sound in your ear
- i havnt include a tire sound. it got annoying after a while
- there is also a roadster/ convertible version in the file
- and many more things...
I havnt a specific forum tread for this car. If you have questions or want to mod the please PM me.
Unimog U5000 (Beta)
Philzilla and I have been working on the Moggy for a while and its ready for a beta release. The mesh is accurate to its real life counter part. Although the paint job and back end is completely custom.
The real one is used for: "Dakar", "Truck trials" and "Rallye" the price tag is about $80,000 USD (good thing we have simulators :P) I will let the Pictures do the rest of the talking. I made the detailed mesh and Node and beam chassis and Philzilla made the awesome "Dakar" suspension and some of the chassis for it.
Extremely detailed 3d mesh
High resolution texture
Custom paint job
It does have its bugs
missing steering wheel,
few inverted faces and
the front axle does not move when it terns
Feel free to make skins or mods for the Unimog as long as you give credit.
Thanks to Aivar for finding the bugs that caused the 0.38.xx crash
Here is my latest Kenworth mod. This is a T600 "Anteater" which was first introduced in 1985 and was Kenworth's first aerodynamic truck and a very radical change from the W900 line. This specific model is powered by a C15 Caterpillar engine with a 13 speed transmission. It features a fully animated interior- guages, shifter, pedals and steering wheel. The truck also has diff locks for hauling heavy loads.
Huge thanks to Box5 for the original W900, Jerald for the sounds, Fidoj for fine tuning and everyone who provided support and motivation along the way.
In the pack is the photoshop file to create custom skins. The ambient occlusion names correspond to the truck names, i.e AO1 = T600_1, AO4 = T600_4, etc. (5 and 1 share AO1). When you save the skin as a .dds be sure you have the right AO layer selected and the others invisible, otherwise it'll be all screwed up.
This is my mod to BigBoy and 95blackz27's Kenworth T800.
Things I added/remade:
I chopped the stacks.
Fixed to hydraulics in the back (red/green)
Made the truck shinier.
Change the color then changed it back.
Added a weight to the Tri-Axle Longframe Daycab (.truck file #1)
Added then got rid of a bull bar from the Kenworth SAR.
Added then got rid of custom mudflaps made by me.
Added color to the door handle.
Authors: BigBoy (Original Truck); 95blackz27 (Added Traction Control, Shined Driveshaft) HemiBoy95 (Aolcao Wheels) CarBoy (Weight and N/B for Weight) Scania_Lover (This mod of it)