Included in the pack is:
- Manitou telehandler with coupling for attachment
- Manitou telehandler with truss boom
- Manitou telehandler with winch
- Bucket attachment
- Forklift attachment
- Counterweight loads
Version 1.2
- Skin selection menu removed (download skin pack instead - see forum link)
- New torque curve
- Flares added
- Working lights/beacon added (Ctrl-1)
- New Manitou winch version
- 2 Counterweight loads
A concept for attachement I thought of a while ago, and Simp's Dozer was a good vehicle to test it on.
This modified dozer has a "claw" (with contacter polys) that can grab a square rack on the attachment.
(The picture shows a test crate, but in this zip I included the original blade with the same pickup system)
F3/F4 for the trailer hook
F5/F6 to raise/lower the arms
F7/F8 to open/close the "claw"
When the blade is attached: F11/F12 to tilt it a bit.
It may take some practise to attach the load The heavier the load is, the sooner it will fall off on a bump.
Feel free to make other attachement, or use/improve the concept for other vehicles.
This is a aircraft tow tractor that doesn't need towbar and works.
I know that there are things that needs improvement. Textures, flares, brakes etc. It's my first try and the first version.
It is easy to use. You just have to hook the front wheel of the aircraft and lift it a bit. Be sure to hook to a node and not in the tire.
It is able to tow aircraft, up to the Antonov 12 or the B-29. (For the An-12, it is easier if you modify the node 180 in An-12.plane and replace the n by a l.)
Hey guy's after a long few weeks the public beta is here!!! Its my garden tractor, this pack only contains the Stock, and Race, and Bucket Loader versions of the tractor. Once i have more time more will be added so tell me what you guys think of it Also remeber this is BETA, not compleatly Done! Haha anyways this is also my first creation so constuctive critisisum is welcome, good or bad Thanks hope you enjoy it.
Also, If you wish to attach attachments to the Bucket Loader version you will need the pack listed below. It is the manitou MLT 731 telehandler v1.2, The Bucket And Forks will work on my tractor, So again tell me what you think and enjoy this thing, I have worked very hard on it
I have worked very hard over the last few months on this backhoe and were still just getting started.
This is only a beta, So dont exspect the best, And its not done yet so dont rate 1 star saying its not done, i know....
You need to delet the old one for this one to work!
Update V1.1
Redid front bucket - Larger
Re textured the bucket, Less cat logos, and just better looking.
Fixed wight problem, Now can be operated with no wheelys
Fixed Camra, Now works fine
Unimog U5000 (Beta)
Philzilla and I have been working on the Moggy for a while and its ready for a beta release. The mesh is accurate to its real life counter part. Although the paint job and back end is completely custom.
The real one is used for: "Dakar", "Truck trials" and "Rallye" the price tag is about $80,000 USD (good thing we have simulators :P) I will let the Pictures do the rest of the talking. I made the detailed mesh and Node and beam chassis and Philzilla made the awesome "Dakar" suspension and some of the chassis for it.
Features
Philzilla's suspension
Extremely detailed 3d mesh
High resolution texture
Custom paint job
full interior
full Damage
Bugs
It does have its bugs
missing steering wheel,
few inverted faces and
the front axle does not move when it terns
Feel free to make skins or mods for the Unimog as long as you give credit.
Thanks to Aivar for finding the bugs that caused the 0.38.xx crash
Enjoy ;D
Here is 2 updated versions of Nitro's excavator.One with A thumb and one without one,Simp made the rotator more stable.I made the excvator have a thumb,more commands,help file,i canged the skin,the thumb & bucket has contactors so you can pick stuff up with it,and if you can't do that,the bucket has ties so you can pick up a load that way,it also has ropables on the wheels (along with rollon) so you hook it up on a trailer.i also added many hydros to the excavator so the boom sways less.there might be another verison of this machine soon to come with diffrent attachments (only a rumor not true yet)
You cna find this on the other land vehicals section when you start up ror all the way on the bottom.
Relased with promission.
Nitro-orginal excavator
Simp-rotator mods so your excavator dosent wooble
kenworth-for making the thumb and the other edits to the excavator.
Class lexion 570 Montana FINAL Version by Rockport 19
for Rigs of Rods
Features:
-very big combine harvester
-Its the first Combine Harvester for RoR ( Correct me if Iam wrong! )
-many real functions ( F1-F10; press T ingame)
-nice tire textures
-real handling ( dont drive it like a racecar)
-my first truck for RoR
Known Bugs:
-not complete submesh with bugs
-very fragile ( rearaxle can broke sometimes)
-wrong position when spawning
Feel free in modding but notice my name ( Rockport19 ) in the Readme
This combine is not finished but I release it now because other projects are waiting
Future Projects:
-Improve the Submesh
-Making a TerraTrac version of this thing
Enjoy it !
!!!PLEASE UNPACK THE ZIP FILE INTO YOUR TRUCK FOLDER!!!
Massey-Ferguson 8400 'Special Edition' (version 1, revision 1):
*Please update to Rev 1!*
Credits: MF original (called "Adam-Tractor") published by "adamoninternet", submeshes by "Trever", thanks to everyone else that help shape it. I modified it heavily such to call it S.E., changes as noted:
-New gearing, more torque, more base and cargo mass
-Longer rear hook
-Bigger front and back tires
-Custom rims (if you use my ttwinturbowheelface rims)
-Fixed smoke so it comes out of correct location (used to come out of corner of cab instead of exhaust pipe)
-Strengthening in certain areas
**Changes for revision 1:
-Decreased torque by 1000 to help decrease stupid-high top speed
-Removed last ~7 gears to decrease top speed greatly, increased diff ratio slightly for better turning
-added "fileinfo" line to MasseyFerg_SE.Truck file -> includes uniqueid, categoryid, and fileversioninfo (now 2)
-download is now a .zip file instead of .7z
Case-IH Magnum 8950 5th-Wheel Edition - Skeleton (synonymous with model 8920 - Skeleton)
>>'Skeleton' signifies this is just the frame, no submeshes, skin, and props
###SPECIAL COMMANDS###
F4/F5 -> Raise/Lower 5th wheel hook
F6/F7 -> Extend/Retract 3 point hitch
F8/F9 -> Raise/Lower 3 point hitch
###
Description: The 5th-Wheel Edition includes a 5th Wheel Wagon that is hard attached to the 3 pt. hitch. This wagon makes it far more practical to haul 5th wheel loads than the 8950/8920 standard edition. In addition to the trailers not being inside the tractor now, the back of the tractor doesn't take all the weight causing the front to weight less thus making the front wheels much less grippy. Now the wheels of the wagon take the weight, and the tractor remains balanced in weight. Nevertheless, 12000 Kilograms of weight is added to the front of the frame via "load" nodes.
Installation: Unpack this .zip folder and move all files (SideRearSS optional) to your RoR->data->trucks directory.
I recommend installing my custom rims (so called 'Spectre'), available in the "Other" category from the Repository.
Credits: Thanks to Polo for doing the steering hydros and help with frame work of the tractor itself
this is another replacement pack includes all of my and zts's zetors and some more i made tonight
to install remove all other zetor packs and put this one in
Case-IH Magnum 8950 Standard Edition - Prototype, Skeleton, *Deluxe Package - Version 0.82
!! Highly recommended you update to latest version if you have an earlier one! !!
Changes -- 0.75 -> 0.82:
-Fixed the cabin camera not being orientated properly
-Changed front wheel nodes' rays from 20 to 16 to prevent possible problems
-Added forwardcommands; ability to use a trailer's special controls are now available
-Made front wheels harder to bend out of shape during hard cornering
-Removed 2nd set of shocks from front wheels
-Made the wheels slightly bigger
-Minor revisions...
**DELUXE PACKAGE CONTENTS**
-Case-IH .truck file and -mini avatar for ingame preview
-my 'Spectre' rims if you so choose to install, as directed by the readme
-real Case-IH Magnum 8920 pic
**TO INSTALL**
Unzip this package and view the "CaseIH8950 Readme" for installations instructions
Also, for special controls, see the readme (hitch controls, trailer controls)
**CREDITS**
-Conception, Frame, Wheels, Engine-Tranny, and more by DSwan aka TruckMax
-Front wheel steering hydros, wheel & frame strengthening by Polo
Lastly, please remember to rate this after downloading and experiencing!
a new pack of zetors includes earlier zetor crystals and 2 modfied tractors the zetor crystal ontop is acctully one that i have seen the front axel was cut off and hydrolics added to the backend it was then attached to a slurrytank authough this one still has a Invisabal frontaxel so you can drive to a load spawner span what u wanton the back then drive (not very realistic but it works)
then theres the roadless its got eqal front and rear tyers
HI! Tjis is a zetor pack, I converted the all in to SLED PULLERS!!!! (to go with box 5's "sledpull") Origininal by ZTS The 1st one pretty much blows... the second has more Horses, and a longer cassis. The class 3 come with waaay more horse power, lowered weight, and KILLER long chassis. I HAVE ONLY TESTED IN 0.35!!!!!!!!!!!!!!!!
This is a john deere 490D hydraulic excavator. It is mostly mesh and will be capable of flexbody eventually. This machine preforms pretty well I think.It has taken a long time to create but it is finally finished. the mesh has no backmesh so you can kindof see through the cab. i have made controls on the inside and mesh tracks for looks. the bucket is a submesh and can be contactable for lifting stuff. on the end of the bucket there is a bar with commands to be used to lift things up. It has ties on the end so you can lift the rear ends of cars.box5diesel helped me out with the meshes and normal support questions. The other versions of this will be released soon but i need a break from modding.
***LIFT UP THE LIFTiNG HOOK ALL THE WAY BEFORE DRIVING!***
Some minor known bugs:
tends to not want to climb up the ramps for a trailer.
the boom meshes shake once in a while
the mesh for the cab has no backmesh therefore you can see through it
The machine will wobble immencly if you do not LIFT UP THE LIFTiNG HOOK ALL THE WAY BEFORE DRIVING!
RoR first large scale tractor, featuring a full cab, 3 point hitch, amongst other things. This is still an early release and further versions will be made available in the near future. I would like to give lots of thanks and credit to Trever from the forum who created the submeshs and the semi trailer attachment thing (included in the pack). Other thanks to bonehead and Thomas; amongst giving credits to whoever created the original model in Google sketchup.
A set of 2 tractors Made by ZTS the zetor 16145 and a massy fergyson 3069 (skin by jamie) that i forgot to relese ages back, This pack has been gift wrapped in me(meshes) And danielpsp's (import to RoR and beam work) tractor implements. Hence both tractors are equipped with 3 points, implements are in the unsorted section)
Included are:
1X MF 3069
1X zetor 16145
1X zetor 16145 with duels
1X zetor 16125 (2wd)
seeder
spreader/spinner
linkbox/bucket
a small harrow
NOTE!!! YOU MUST REMOVE ANY OTHER ZETOR PACK FROM YOUR PACKS FOLDER OR TRUCKS OR THIS WILL CONFLICT
Manitou_731.zip
view details
Also remeber this is BETA, not compleatly Done! Haha anyways this is also my first creation so constuctive critisisum is welcome, good or bad 
Gold
Silver
Bronze
