|
|
|
Browsing tag Trailers, found 189 matching files. (8 pages)
|
|
|
Here is an inclosed bumper pull car trailer I made. The dimensions are: 7.62m or 25ft long, 3m or 9.8ft wide, and 2.4m or 8ft tall. Also it includes a .psd and .pdn texture map to make you own
texture. controls: CTRL + f1 & f2 = landing gear, CTRL + f3 & f4 = ramp
Credits
DODGE charger (me) = everything
Joebus = help with submesh
Please get permission before you release a mod.
Here it is hope you enjoy!
Discuss Here: Inclosed Car Trailer [RELEASE] |
| |
|
|
9 Comments, add comments here.
|
|
|
Mr Phat is a 3.2m wide heavy haul trailer.
the model and textures where made by me (fidoj)
the flares where added by coco (thanks mate).
controls are CTRL+F1-CTRL+F2 for the landing gear.
thanks to all the beta testers. |
| |
|
|
24 Comments, add comments here.
|
|
|
This is a skin for Lenni's Selfsteering trailer.
I skinned it to represent a wagenborg nedlift trailer.
As I used the .skinzip system, I may upload this. |
| |
|
|
3 Comments, add comments here.
|
|
|
Selfsteering Trailer with Dolly
How to use:
Pull the trailer next to the load so the rear part is at the right place.
Disconnect the rear part with F11 and pull the front part to the front attachment point.
Use a crane to put the load on, the wood load also has invisible legs so it can be loaded without crane, use F9/10.
The steering strength can be adjusted with F5/6 to fit to the length of the load.
The rear part has manual steering for special situations: F7/8, don't use when the steering is already at maximum angle!
The legs fold in automatically if you pull them up with F1, hold F2 until they fully fold out.
The load will attach on the trailer automatically once it is close enough to the right position.
To unload push F12, but attach it to a crane first and put enough tension until the trailer almost lifts off!
Thanks to Lifter for the hookgroups and triggers and for support with this project!
Thanks to fidoj for his roof part load!
Please do not modify this without my permission,
skins can be added using the skin file system:
skins-working
If this system is used properly then no need for my permission for skins.
Talk about it here:
Selfsteering-Trailer-and-Dolly
You need a RoR version with working hookgroups and triggers to use this, 0.38.40 and up! |
| |
|
|
|
22 Comments, add comments here.
|
 (updated on 12/9/11)
|
Here is my tilt deck with a couple fixes, it doesn't lean anymore when you load a vehicle onto it and I fixed some wheel problems it had.
Credit:
Jerald9000: node/beam chassis
Crazyjoe: mesh wheels and trailer
Bjytech: Flairs
Donoteat: wheelbands
The truck is my private mod and i will not release it do not ask me about it or pm me for it. |
| |
| Average Rating: |      | Tags: | Trailers |
Downloads today: 0, all time: 26163 |
|
4 Comments, add comments here.
|
 (updated on 12/9/11)
|
here is a set of 2006 Lamar tandem axle trailers me and Crazyjoe made the first one has a ramp for loading cars and tractors and such the secound one has no ramp and is for huling loads like hay bails logs craits or whatever you have that requires a trailer with ought a ramp please place in packs and enjoy. WARNING This trailer is not to be modded withought permission from myself and Crazyjoe.
commands:
ctrl+F1/F2 to lift the landing gear up and down
ctrl+F3/f4 to let the rear gate down
O to activate ties once load is on trailer
Credits:
Jerald9000: node and beam chassis
Crazyjoe: all meshes and mesh wheels
Bjytech: flairs
Donoteat: wheelbands
Big thanks to all beta testors
Dieselmaster
EdTheNerd
MadMike
Sushi
Bjytech
Clown
install and enjoy |
| |
| Average Rating: |      | Tags: | Trailers |
Downloads today: 0, all time: 46046 |
|
12 Comments, add comments here.
|
 (updated on 1/10/11)
|
Ekeri semi and rigid trailers for 6x2 Scania R560's
Features:
Openable rear and side doors
Fully contactible submesh
Ties
Credits:
Korppi (Kuru): All meshes and N/B, some textures, basic skin
Salonen: better skin, ideas
Nexmartin: Refridgerator texture
Discuss here
Have fun =)
Rigid verson added 11/1/11
Remember to remove all previous versions, and regen cache. |
| |
|
|
| | on 9/3/11 6763 downloads | second upload to the repository another skin for my company rormart this skin is for the Ekeri trailer for 6x2 Scania R560 that kuru made to install it you just put the DDS file in to your ekeri.zip and you done!
link to rormart: rormart
[read more] | | (4 more mods here) |
|
22 Comments, add comments here.
|
|
|
BBD-EuroMax trailers.
3 axl
4 axl
5 axl
6 axl
Controls;
f1/f2.....Force steering
f13/f14..Support legs up/down
f15/f16..Gooseneck up/down
f17/f18..Preload trailer up/down
f19/f20..Suspension down/up
http://www.rigsofrods.com/threads/84...706#post925706
Well have fun with them.
For the ones that know how to edit stuff.....there are some loads in the zip.
You can place them on the trailers as meshes and add weight. |
| |
| Average Rating: |      | Tags: | Trailers |
Downloads today: 1, all time: 8000 |
|
8 Comments, add comments here.
|
|
|
hello, this is my newest trailer for RoR.
I have given him a new mesh that looks a lot better than the old version of the trailer

|
| |
|
|
No Comments yet. Add some here.
|
|
|
This is my Car dolly. It is straight submesh and very easy on FPS. This is more of a proof of concept as apposed to a full on new modification. You can use almost any vehicle to tow any other vehicle. Since it is submeshed you can scale it to be used on any vehicle rather easily. As of right now this is considered to be in beta. On a side note it is currently impossible to tow any vehicle with contacters. You will have to comment them out or watch them be destroyed by the wheel clamp.
Also feel free to modify and redistribute. Credit is not necessary but it is appreciated.
http://www.rigsofrods.com/threads/85...969#post943969
Commands
F1-F2= Landing gear
F3-F4= Main ramp
F5-F6= Locking mechanism |
| |
|
|
3 Comments, add comments here.
|
 (updated on 25/12/11)
|
version 5, 4x4 trailer & jeep trailer
there is an invisible leg to lift the front to lift it
press+hold F2, hit ' L',once its attached press F1 for a few seconds to retract the leg.
UPDATE: fixed rim texture problem - tdev |
| |
|
|
2 Comments, add comments here.
|
|
|
A skin for the Tanker and T600. Based off a tiny Ohio gas station chain. Picctured is the chardon ohio tank out side of the chardon oil gas station.
"CREDITS" Truck- Box5Diesel & HemiBoy95
Trailer- Trevor
Skins- Me |
| |
| Tags: | T600, Kenworth, CAT, Skins, Tanker, Trailers, Loads, Heavy Duty, Transportation, Street, Land Vehicles |
Downloads today: 0, all time: 4585 |
|
One Comment, add comments here.
|
|
|
Here is a skin for the Kenworth T600 and a 2 axle tanker trailer. The skin is based off of fuel delivery trucks for HESS gas stations. I made the skin as close to the actual paint job as possible.
Credits:
Kenworth T600 - HemiBoy95 & Box5Diesel
Tanker Trailer - Trevor
Inspiration - My father
Skins - Venem (me)
|
| |
| Average Rating: |      | Tags: | Other, Loads, Trailers, Heavy Duty, Land Vehicles, Heavy Machinery, Transportation, Semi, 6x4, Tanker, Skins, T600, Kenworth |
Downloads today: 0, all time: 12164 |
|
|
6 Comments, add comments here.
|
|
|
Rbns 641 freight car
All content is for use in Rigs of Rods only!
Use RoR 0.38.67 for this!
Features
- Detailed meshes
- Realistic buffers, coupling
- Custom sounds
- Animated stakes
- Hook system to fix your loads
Instructions
- Coupling is done by pulling up/down the orange cylinders (nr. 1 and 2) at the edges with your mouse. Click here for a tutorial
- You can fix your loads by pulling down the orange cylinder nr. 3
- When you are in a locomotive, use Ctrl+F1/2 to retract the collision box and Ctrl+F3 to flip the stakes
Credits:
- Sputnik_1: meshes, node and beam, sounds, textures
- BigBoy: much help and testing, thanks a lot!
- The Inviteds: testing
This is not compatible with BigBoys Bombardier ALP!
Support Thread
|
| |
|
|
5 Comments, add comments here.
|
|
|
this is the flatbed trailer that sinorstanger created i give lots of credit to him and i was reallesing this for him
f1/f2 for legs f3/f4 to move axle forward back wards u need to take the trailer off to putt thinga on what u do is extend axle towards truck f3 then u lift the truck with the legs:P |
| |
| Tags: | Trailers |
Downloads today: 0, all time: 3071 |
|
|
No Comments yet. Add some here.
|
|
|
This is my modded virsion of the sliding flatbed i modded a while back so i finally wanted to mod and make it better. it works like and actuall landoll trailer. have fun and keep the wheels about where i have them in the picture cause if u go any further it will break, also keep ur parking brake off to move the wheels. this is a trailer
Commands
dolly legs: f1 f2
wheels forward and backward: f3 f4
up and down: f5 f6
origanal author: sinorstanger |
| |
|
|
No Comments yet. Add some here.
|
 (updated on 28/3/12)
|
Hello, I'm happy to introduce my first ever official mod to a trailer, It is a monster energy skin for the FEDEX 53ft Great Dane dryvan, Just throw it in packs, Because of the (1) at the end it will not overwrite, So enjoy, I hope it is a cool mod to you guys, It took about 3 hours to get it right... haha.
Credits:
Original trailer: Jerald9000
New skin: aarongary2011
Tell me if i forgot anybody!
Enjoy!
Link to further discussion and Show-off screens:
Monster-Energy-Dryvan
Feel free to post your screenies |
| |
|
|
No Comments yet. Add some here.
|
 (updated on 29/3/12)
|
This is a Philadelphia Eagles skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder. |
| |
|
|
No Comments yet. Add some here.
|
 (updated on 29/3/12)
|
This is a USAF skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder. |
| |
|
|
No Comments yet. Add some here.
|
 (updated on 29/3/12)
|
This is a Walmart skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder. |
| |
|
|
One Comment, add comments here.
|
 (updated on 29/3/12)
|
This is a Detroit Lions skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder |
| |
|
|
No Comments yet. Add some here.
|
 (updated on 29/3/12)
|
This is a Cincinnati Bengals skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder. |
| |
|
|
One Comment, add comments here.
|
|