hola amigos de MÉXICO o de E.U.A les traigo este camión espero sea de su agrado y feliz año nuevo si se les ofrece algo contáctenme en mi correo próximamente su remolque adiós tienen todo mi permiso de modificar siempre y cuando se me de el credito =) goodbye
UPDATE: I've been working on a variation of my own and it's complete, or close enough. It is fully submeshed and will contact with other vehicles(that must to be contactable). It's sides and tail can fold down. The rear rollcage can be lifted using Ctrl+F4/Ctrl+F6. It has ties in the back so you can drive an vehicle into it. Unfortunately all the stuff I added makes it too "tippy" to carry a vehicle into water anymore but driving on land is fine. Also has a trailer hitch that can be completely folded away if you're not going to use it. All controls are listed in-game. Have fun.
This is an Tatra 813 pack I modified from Pricordes original versions and added "Wheels2" to all of the models so you can inflate/deflate the tires. Also updated to work properly in the latest RoRs release as it was having texture issues before. Use [ to deflate and ] to inflate the tires. This is not as easy on your system as the originals were. They were only about 1300 beams before, now each has over 2800 to properly simulate the wheels.
NOTE: You will need to enable advanced wheels in the configurator under the "CPU" tab to enable "Wheels2" in versions older than 0.38.33.
Please note the credits for the crane go josh (1239) who made the original.
UPDATE
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
UPDATE2
fixed the spelling mistake on the ropables so they all work now
UPDATE 3
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
Here is my Mercedes Benz SK B1 1224 THW.
It is based on the 16 TLF from FF_Neustadt where I changed the skin and truck file.
The original truck is from FF_Neustadt
Update 23.11.2012
I have changed something in the truck file and in the zip file.
On my computer now it works with ROR 0.4.04
I hope you will like my truck. If you found problems with it you can contact me with PM and than
I solved them.
This is a working concept of a walking beam suspension for RoR, It's a simple truck, the suspension isn't, but it works, and rather interesting to drive.
Feel free to use this truck as a basic for others, just give credit where it's due.
So here is my first upload on the Repo, the International PayStar 5600.
The first version comes as a 8x4 Semi truck used to haul Oversized Load.
Controls are:
F11/F12: raise/lower booster axle
CTRL+F1/CTRL+F2: open/close left door
CTRL+F3/CTRL+F4: open/close right door
CTRL+F5/CTRL+F6: open/close hood
CTRL+F7/CTRL+F8: flip "Oversized Load" sign
Hope you enjoy!
Mercedes LP322 Moving Van
Here it is, the Mercedes LP322... It's almost the same as the Buessing Burgloewe as you might noticed, just with another front mask. But that's ok, as the bodies were build by the same manufacturer and they only used different chassis, like from Buessing and Mercedes.
Features:
- flexbody
- managed materials
- material flares
- fully interior
- working switch for light, fog light
- working sun shield
- openable doors
- submeshed loading room (with collision)
- openable windows with moving hand bars
- working wipers (experimental)
- working brake pedal
- moving shift stick (at least it moves into reverse gear)
- ramps to get load inside
- ties to secure load
- ropables for tow trucks
The Mercedes is abit more powerful than the Buessing and goes a bit faster.
Buessing Burgloewe UM Moving Van
Here it is, my Buessing Burgloewe truck.
Features:
- flexbody
- managed materials
- material flares
- fully interior
- working switch for light, fog light
- working sun shield
- openable doors
- submeshed loading room (with collision)
- openable windows with moving hand bars
- working wipers (experimental)
- working brake pedal
- moving shift stick (at least it moves into reverse gear)
- ramps to get load inside
- ties to secure load
- ropables for tow trucks
This truck is not very powerful and it's slow. If you don't like that, don't drive it... I wanted to make it as realistic as I could.
Box5Diesel's Duece and a half (more like a 5 ton, but who's counting, lol)
This thing is a jack of all trades, crawling, climbing, towing, offroad, transport, u name it. I've made it to the top of the rock course with it, which took some tries, but its doable for sure. It also likes to climb walls, lol. The video attached shows that pretty well. I hope yall get addicted to it like I have, and multiplayer starts to swarm with it, lol. Anyway, if u have any comments feel free to dicuss them in the heavy trucks showroom thread for this release.
The hitch is setup for gooseneck now, but its also got a bumper pull attached, all u need to do is change node 87 and 88 from "h" to "n" or vice versa in the truck file (I made a small section for each node to help make it easier to find in the file), you can choose either one to be "h" for which hitch u want to use at a given time.
The exhaust stack is not a mesh, so it does break if u roll on it heavy, but im hoping to learn mesh soon to have a nice axle, stack, and suspension mesh mod for this.
Here's the Kenworth Needle nose Semi truck i've been working on. It's now complete and ready for release. It has Dual exhaust, so when u get 0.34, the Dual exhaust will automatically appear.
I tried to make the truck as realistic as possible, in both looks and driving, so I hope everyone enjoys. Big thanks to DFO for the really nice wheelface's.
Features:
-Real weight, real power, real scale. (so don't expect to tow the ror trailers that way a kabillion lbs.)
-Lockers (press W)
-Operational dump bed, & tailgate
-Contactable bed to load vehicles or objects with ties (press O to tie down load)
-Animated winches on all except cargo version, some even have a rear winch.
-Flexbody everything pretty much
-Specular Shader
-Detailed Animated Interior with shifter.
-custom deuce sounds, with added turbo
Known issues:
-Shader shows up black sometimes, restart ROR until it appears normal, or download boring material below and drop in deuce zip.
-5th wheel version breaks when hooking to some trailers
-No flexbody tires (would be way to cpu heavy, it already is)
UNIMOG 406
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
Disclaimer:
-mods for personal use ok, but don't ask to release your super engine power lift kit mod, or to use the rims/tires on your vehicle to showoff, it ain't gonna happen, yo.
My goal for these trucks was to have some more convoy type vehicles that could do pretty much anything. All have working hitches, lights, mirrors, etc. The dumpbed has a contactable surface but it doesnt seem to hold crates really at all for some reason.
All the trucks have ties in the back so if u back up close to a vehicle and press "O", u can tow it around. I commented out the ropables in the back so the ties wont grab them. Ropables in the front are behind the wheels so u can strap it to trailers or tow any of these trucks from there.
There really stable on higher speed offroad like nhelens, and if u crawl slower u can get in most places in tough offroad spots.
The cargo mesh(big canvas cover version) when rolled over, the cargo part will go in the ground, I didnt want to build a box out of beams and nodes to make it contact the ground because i wanted to keep fps as low as possible, so thats something to just live with. Other than that, enjoy.
So alot has been updated in this pack, the skin is totally new, the tires are new, the lights are sharper and brighter. A re-bored engine giving 3000 revs more capable of pulling very heavy loads, especially with a new 18 gear transmission. it features abs, tcs, slope brake all custom tuned to fit the trucks.
Box5diesel very kindly has had the trucks to test and they are of his liking. here is a quote. [read more]
FREIGHTLINER2011.zip
view details
Gold
Silver
Bronze
