here is a set of 2006 Lamar tandem axle trailers me and Crazyjoe made the first one has a ramp for loading cars and tractors and such the secound one has no ramp and is for huling loads like hay bails logs craits or whatever you have that requires a trailer with ought a ramp please place in packs and enjoy. WARNING This trailer is not to be modded withought permission from myself and Crazyjoe.
ctrl+F1/F2 to lift the landing gear up and down
ctrl+F3/f4 to let the rear gate down
O to activate ties once load is on trailer
Jerald9000: node and beam chassis
Crazyjoe: all meshes and mesh wheels
Big thanks to all beta testors
This my Goldhofer STNL3-Platform trailer "Speedy".
"Speedy" is a very flexible and light platform trailer.
CTRL+ALT+F1/+F2: lower/raise trailer legs
CTRL+ALT+F3/+F4: lock/unlock steering (lock for reverse driving or extending trailer/steering is locked when trailer spawnes)
CTRL+ALT+F5/+F6: extend trailer
CTRL+ALT+F7/+F8: raise/lower liftaxle
CTRL+ALT+F9/+F10: raise/lower trailer ramps
Note: All commads exept ramps are one-press-commands.
Hope you like it :-)
Here's a trailer I made awhile back with a detaching Neck. It can haul some big stuff, has a flexbody deck that bends flat with a heavy load and flexes over bumps. Its not all that finished, but its as finished as its gonna get, lol. I made a video to show how to use it
Ctrl F1 to raise the neck so you can back under and lock on
Ctrl F2 seats the neck on the hitch after you locked on
Ctrl F3 attaches neck to the trailer
Ctrl F4 detaches neck so you can drive it out of the way to load/unload
second upload to the repository another skin for my company rormart this skin is for the Ekeri trailer for 6x2 Scania R560 that kuru made to install it you just put the DDS file in to your ekeri.zip and you done!
here is my second upload on the repo:
A 300 ton Heavy Haul LowBoy trailer.
I made the 3d-model some time ago, now I put it into RoR with some overwork.
You can change the color by editing the "300tlb_color.jpg" and the color of the wheels by editing the "300tlb_wheelcolor.jpg".
It has only five invisible wheels, this means it works very smooth even on lower systems (and that is actually the reason why I "cheated" ;-) ).
Use F3/F4 for the (invisible) trailer legs under the first part.
With F1/F2 you can rotate the steering dolly to the left and right. As far as I know this is done via hydraulic in real life. In fact it is just like a semi, but not propulsed.
It is loaded with a big tube.
Have fun driving it (and don't forget to look after the steering dolly ;-) ).
Well after a long wait I decided to release instead of waiting to release.
It has six ties between the stops. becareful with the front hook it can break.
F1-F2 raise lower hook (Hook is also a contact so raise it before backing)
F3-F4 open control panel on the side.
F5-F6 raise lower axles
F7-F8 raise lower axles
F9-F10 raise lower axles
F11-F12 raise lower back ramp.
This has no dolly trailer this time. It is hard on the framerate too.
Next version will probably use hookgroups to make more solid.
Max capacity is 25 tons. I will also try to reduce axles next time.
A telecopic trailer based on OVB-55-03V(T) model from Nooteboom.
features and commands:
- can extend up to 40m (CTRL+F1/F2)
- manual steering (F7/F8)
- adjutable suspension (CTRL+F3...F8)
- drop sides, to prevent falling loads (CTRL+F9/F10)
- fully working ligths
- avaible in 3 colors: red/yellow/blue
All commands are written on the front left side of the trailer
Here is a 2003 53 foot Great Dane dryvan that I made with Crazyjoe it has opening doors and a contactable inside so you can load crates cars or whatever you pleas into it. The sides of the trailer and the doors are sinkable if you have any questions see the forum link below. Trailer body is fully mesh and has moving mudflaps too.
This is a Cincinnati Bengals skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder.
This is a Detroit Lions skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder
This is my first upload, its a mod to Box5's gooseneck, I used his n/b and Pedro's meshwheels, neck is shortened, and the submesh is supposed to be impossible to pierce. the other meshes are all made by me.
Box5 for original file
Pedro for meshwheels
Squishy and Lilgti for support
All others who have put up with my questions for so long
this height adjustable car trailer, is designed and built for easy loading of low ground clearance vehicles and loads.
the bed is 2m (6'56) wide and 5m (16'40) long.
load capacities unknown.
it has 4 ties 2 at the front and 2 near the wheels, press o to lock the load.
it has an invisible foot near the front to make attaching to a vehicle easier ctrl+f3/f4.
the bed lift hydrolics are run via ctrl+f1/f2.
the mesh's and textures that are produced by me are distributed open for use to all with credit to author.
This is a twamco 40 ft tilt deck trailer me and Crazyjoe made it includes custom mesh wheels and mesh body, as far as i have tested it will hold from small vehicles like the bobcat cars and trucks, and all the way up to heavy machinery like the zetor tractors the 450 dozer and the v2 excavator also the MC roler. Goes best behind dump trucks and medium duty trucks like the 1st gen or dodge rams by box5. Please enjoy our trailer to full exstent. WARNING mods to this trailer amy not be released with-ought permission, see me on the forum for details. Their also may be breaking beams on startup just ignore this problem.
This is a trailer I made from Pricordes semiflat. The main middle frame is the same, but u can see the changes. It has tie downs in numorous spots for vehicles of all sizes. Gooseneck style hitch and neck, new texture, new ramps, and it can fit the behemoth (barely), lol. This was to be a pack with the duece, but I might attach it later to the duece so u can tow it around in multiplayer.
*BUG FIX* LATEST UPDATE
I'd like to say I've fixed the "Big Tex Goseneck.load"
*ever sense .38's "Pinguinville" came out there have been various conflicts with the map's and it's own materials & meshes, merely the extent to which I altered the trailer is merely changing the mesh names to void such conflicts* [read more]
A generic european style foodstuff tanker trailer.
Be careful when driving, it behaves like a partly filled trailer and tips over easiely!
It can be modified if the modified file is really independent, if you want to make a skin only you should use .skin files or release the texture file only.
If you need help with making an independent mod please contact me.
Give credits when modifying or using parts of this trailer!
Trailer with an ampliroll hook, modified from the Volvo.
Removed the cab and the 2 front axles, and made a regular tow bar. Color is matching the Zetor Traktor.
You have to enter the trailer like a truck to connect the hook to the load, the wheels are still driven so you can move it forward and backward.
It has importcommand so it "listens" to the towing vehicle as well (if that has forwardcommands)
ctrl-F1/F2 for the legs
ctrl-F3/F4 for the tow bar height
ctrl-F5/F6 for the arm with hook
ctrl-F7/F8 for the dumping arm
ctrl-F9/F10 to tighten the ties (they sometimes only grab, but don't tighten)
a dump trailer... i have tested it and it can have a 30 tonne load, as you can tell its not finished. it has no flares and no mesh wheels if you want to add some you can (jerald9000, you can ), i have done my part, mostly. and i have a half height version come soon. its fully contactable and is 3 flexibody mesh's you can edit the textures i have left 2, framep.png and bucketp.png blank textures, remove the p and save them as bucket_green.png frame_green.png
(that _green texture i have so you can make your own and not have to worry about going over the other 2 colors).
the picture shows the log, i slid out when i tilted the bin/bucket back so be care full with your loads( 10t log )
A logtrailer that is actually capable of hauling logs arround.
It comes with 3 logs of different weight and size.
The logs were made by Asperion and I have premission to release them with this pack (I've only made minor adjustments to it).
This pack comes with two versions:
High FPS with ordinary wheels
High Detail with meshwheels.
I'm aware of the fact that it spawns of-pad.
Just spawn a log after you spawn the trailer and you should be fine.
Thanks to DennisW for helping me mess arround with the shock values.