I present to you, the 1915 Ford Model T. This holds the name of the oldest real car ever to be put into RoR. This is the Original "Go everywhere, anywhere" car.
There are 6 versions. There is a Pickup truck (2WD and 4WD), a Sedan, a Coupe, a Touring, and a Junker version.
The gear ratios/axle ratios/wheel size/engine power/top speed are all real specifications. The top speed is a physically limited 40 MPH on the dot for all versions except the power-degraded Junker. The Junker's top speed is closer to 30. All versions except the Junker have 21 Horsepower. Junker has around 18.
You cannot drive this car in Automatic Transmission mode, as the gap between 2nd and 3rd, then 3rd and 4th are too large for the game to gearshift between them correctly. Thus, you must drive in Manual or Fully Sequential gearbox mode to get up to cruising speed.
These vehicles are not flexbody, and each on average have between 10K and 20K polys total including all 4 wheels. Honk the horn for a sound only '10s - '30s Fords can produce. Aoooga! Sometimes when you turn, it heavily understeers because the front axle is not very strong, so be careful.
Custom sounds are thanks to DODGE charger (thank you!)
All meshes and N/Bs are thanks to myself, Sirendude2011.
Do not mod this vehicle. Treat this like you would a real Model T 100 years of age. Would you (attempt) to hellaflush a Model T? No, so don't do it. Same goes for hydraulics and lifts with mud tires. It is impossible to skin it with anything except solid colors (no designs), so don't try.
Enjoy this historic vehicle! The driving experience is like no other vehicle in RoR history, believe me.
Terrain description:
This is a desert island, it has no roads but tracks are marked with washed-up logs. There is a few very small settlements dotted around the island.
You start on a peninsula in the midde of the bay and drive across the sunken bridges to get to the island.
You'll need a decent offroad car as there's a section where the track dips underwater, and quite a few large mounds in the roads (where I didn't quite do the heightmap right lol)
Credits:
LJFHutch: Every single non-default object in the terrain (most of the objects I have taken from his Greece map).
PsychoDog: The actual terrain.
F1 Terrain Creator: V1.2 uses trees from the F1 Test Track.
Enjoy.
V1.2
Some fixes and improvements to the island. For the full list of all the edits read the readme. The main edits I've made is to the sunken bridges on the penninsula (I've got rid of the log section since that caused some problems when you drove over it) and added a couple more tracks and buildings. Also added some crops to the farmers field so it's not just green ground any more.
Never released Versions 1.1 - 1.19 because I didn't think there was a big enough change to justify a reupload, so this is the first update. Please tell me if I've screwed anything up that was correct in V1 and I'll fix it.
This works best with 0.38.67. If you use 0.39 there may be some extra bugs (e.g. I had a lot of collision problems when I tested with anything newer than 0.38.67) and things may not look quite right. No fixes are planned for obvious reasons (0.4 is going to be the next release, not 0.39).
*PLEASE DELETE THE OLD ZIP (Zyk.zip) BEFORE YOU DOWNLOAD THIS ONE!*
Here is my grove RT650E rough terrain crane.
the crane can lift heavy objects but not to heavy as it has to be versatile and offroad to.
any problems specify herer: Grove-RT-650E/page2
edit:
Added diff locks
Added more weight
fixed the steering,engine and tires.
Some slight bugs still exist like the front axle bending when turning.
Pretty good offroad capabilities.
Press "O" when you enter to lock the back door & press it again when the bed is at about 10 degrees
Their is no submesh on the bed yet
Credits:
Kuru for the N/B, Engine, Tool boxes & Fuel tanks
Lenni for the wheels
HRVI for making them
Any questions or what ever PM me or ask on here: Scania-142-Heavy-Hauler-Tipper-(Beta-First-Final-public-release)
Do not release mods without asking me via PM first!
Brand and type: Mercedes Benz Atego Sleepwagen ANWB
Ingame name: MB Atego ANWB
Tested in: 0.38.57
This is an Standalone file!
I got permission from Lenni to release this back in April 2011, so I thought this would make a nice addition to the repo.
The ANWB is a dutch company that does most of the towing work in Holland. They basicly control the Roadside assistance branch.
The word ANWB stands for Algemene Nederlandse Wieler Bond.
This is my mod of my previous mod called (MTVR2). This is a purely off-roader truck, it has 10 wheels and go's just about anywhere. The original version of this truck came with older versions of ROR so anyone who has used ROR for a while should remember it.
whats new:
More fps friendly then last version
locking diff's
reworked all the suspension with "shocks2"
removed "wheels" section and added "wheels2"
added a steerable rear axle
added grip nodes to the tires
truck now floats
can now change the PSI in the tires
This truck is not a looker and isnt meant to be, its meant to be a usable vehicle, it go's anywhere in ROR you want and will in fact climb up vertical walls. This truck is almost indestructible even after being drivin off a cliff usually a collapsed wheel is all that happens. It has so much torque and traction that if you give it full throttle from a dead stop in 6th or 7th gear it will wheelie up and over backwards. You can still tow trailers with it just hook them up to the receiver and lock it down with L.
Hey guy's after a long few weeks the public beta is here!!! Its my garden tractor, this pack only contains the Stock, and Race, and Bucket Loader versions of the tractor. Once i have more time more will be added so tell me what you guys think of it Also remeber this is BETA, not compleatly Done! Haha anyways this is also my first creation so constuctive critisisum is welcome, good or bad Thanks hope you enjoy it.
Also, If you wish to attach attachments to the Bucket Loader version you will need the pack listed below. It is the manitou MLT 731 telehandler v1.2, The Bucket And Forks will work on my tractor, So again tell me what you think and enjoy this thing, I have worked very hard on it
ZIL-135 BM-27 Uragan 9P140 launch vehicle and ZIL-135 bare chassis version
UPDATE 2:
- if you downloaded before 2011. december 21. 19:00 GMT (or anytime before this note appearing) please REDOWNLOAD. Otherwise you either won't have the fifth wheel version at all, or the one with bugged wheels. Sorry for the inconvenience.
UPDATE:
- fifth wheel version included. Keep in mind though, that most semi trailers might not fit it because of it's different position compared to normal semi tractors.
- the tires and rims are separate objects now, hence the rims won't flex anymore.
- custom engine sound. Sampled from actual Zil-135 sounds.
- some more skins.
i guess i can say merry x-mas now...
highlights:
- normal mapping
- detailed exterior, flexbody, damage textures
- 8x8 drive with a unique wheel and steering layout
- good off-road capability, and no irrealistic performance
known problems:
- alternate skin selection does not show up the first time you select it, only second time. Must be a RoR caching issue.
- when alternate skin is selected, material flare bindings (lights) do not work. This is confirmed to be a problem with the *.skin system.
A Dutch skin for the Mercedes Atego Metz aerial firetruck.
It's a skin based on the Mercedes Atego from the fire department of Middelburg, Zeeland in the Netherlands.
I have tried to make it as real as possible, but because this firetruck is an older Mercedes Atego version than the one in use by the firedept. I could not exactly reskin all parts correctly.
I hope you like it!!
Pedro (Atego Chassis)
firepics (Firetruck body etc.)
Lenni (Nodes/Beams)
Ruben (Dutch skin)
Install: Just overwrite the files in this .zip with the .zip of the Mercedes Atego aerial firetruck
So alot has been updated in this pack, the skin is totally new, the tires are new, the lights are sharper and brighter. A re-bored engine giving 3000 revs more capable of pulling very heavy loads, especially with a new 18 gear transmission. it features abs, tcs, slope brake all custom tuned to fit the trucks.
Box5diesel very kindly has had the trucks to test and they are of his liking. here is a quote.
Yea I think you could post that up, you did some good work on it. I wish all vehicles used slopebrake by default, I love parking on hills and not worrying about it rolling away slowly.
Post it in the mods&skins section of the showroom.
Thank you box5diesel for testing it and glad you like it.
was a problem with previous versions, but now is all fixed
UNIMOG 406
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
Disclaimer:
-mods for personal use ok, but don't ask to release your super engine power lift kit mod, or to use the rims/tires on your vehicle to showoff, it ain't gonna happen, yo.
This is the finished version of the ERF EC14 Wrecker & Loader that i started many months ago.
It has new UID's so they are standalone to any other version's of these vehicle's.
I have added a winch to the boom now so it is easier to rescue cars. If you find any problems or have any suggestions please post them in the discussion (Link below).
As with the numberplates bieng English i have done them to be realistic & are from the Prefix era. With the 1st letter meaning the trucks age in this case. These ERF's are M reg' so are from 1 AUG 1994 to 31 JUL 1995. http://www.number-plates-car-registr...ion_years.html
I have created the engine to be realistic of a derestricted ERF with a top speed of around 90mph. The engine is more powerful just below its max RPM so when it starts to struggle accelerating just change up a gear & it will keep going.
Here is is again. Yet another mod to The Peterbilt 362 CaboverV2 as released by Transcontinental.
As well as a totally bitchin' skin (Copyright Marco Heitala 2011) i've also changed to the engine, its no longer a 'truck puller' Its just a normal truck for haulin'
This is an addon to my original Mack Terrapro cabs. Well more of knockoff's of mack terrapro's. The cabs are fully skinable and can be used in any project you wish so long as I am credited. These are being released as UNFINISHED, they have issues but rather then they rot on my harddrive I decided to release. I have NO motivation to finish them, most issues are just flares anyways. Also you may use the fire truck rear end also.
This is a "equipment cart decontamination. "
He is one here in Germany, the dews of the civil defense vehicles.
I'm here once the GW DekonP geskint of the ABC-coating district of Aurich.
This is an essentially imaginary truck made from scratch. I've tried to base it loosely on trucks from the 1930's and 40's but its unique. It has meshwheels, a contactable bed and i've tried to give it as close to real handling as i could. Yes its huge but my sketchup ogre exporter stopped working so i cant resize it.
Credits go to: Fordfan for the chassis and me for the mesh and chassis tweaks.
These are my Winnebago's I have been working on for a couple of months. Instead of basing them on a particular year, I just used the styling cues of the early 70's. More or less if these were real I would call them licensed reproductions(Though not really Licensed). Yes, they are made in sketch... But I feel that it is one of my best mods ever. Please keep the sketch comments to your self, I would really appreciate it. Now on to the credits...
Me= The main mesh's/converting/optimizing
Google= the sink in the large Winne
Arthur Hucksack/Creak and me= The chassis
csxgp38-2 Schoolbus version
Now on to business
1. You are allowed to mod these vehicles to any extent, even the mesh
2. You are allowed to upload mods of this vehicle here or any other RoR related site.
3. You are legally aloud to have fun and post pictures to you're hearts content.
This is a Peterbilt 359, they both have bags so u can drop it low. Pretty good driving and thanks trevor for this great but old semi. By the way this is my first repo and i hope its good
authors: trevor and me for mods
UPDATE
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
UPDATE2
fixed the spelling mistake on the ropables so they all work now
UPDATE 3
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
This is the Unimog from my avatar, which I made way back in 2007 but never really finished it.
Despite that, I still recieve questions about where it can be downloaded - so I decided to finally upload it here
Please keep in mind that it was originally made for RoR 0.31a and updated to use (well, at the time) break-through 0.32 tech (aka. flares )
It features a crappy suspension, a tipper which can be operated by F3/F4 (lower/raise tipper) and (F5/F6) close/open backboard and two (!) trailer hitches (front/back) which actually work (in 0.38, that is)
Please enjoy, mod as desired, comment on it here, but most of all: have fun!
second upload to the repository another skin for my company rormart this skin is for the Ekeri trailer for 6x2 Scania R560 that kuru made to install it you just put the DDS file in to your ekeri.zip and you done!
Scania R560 6x2 "Tuning" semi and rigid tractors. Modded from 4x2 Scania R480 semi, originally made by Lenni.
Features:
Lift axle
Tilt cab
"Enough" power, chrome and lights
Credits:
Lenni: 4x2 base version and new UID (big thanks !!)
Korppi (Kuru): Editing the N/B and physics, frame mesh, basic bullbar mesh, airhorns, brights, sunvisor, front rims, lightsign, material flares etc...
Nexmartin: Roofbar, bumperbar and bumperguards, editing the basic bullbar, tons of great ideas
Lokinor566: Flares placing
Denkan: Many great ideas, beta testing
The skin is mainly made by Korppi, small fixes by Denkan and Nexmartin
Hello, I'm here to show a skin that created the MB Atego COMAX, with permission of the coco, the company's Brazilian postal service called Correios or Sedex.
Show some pictures and hope you like it.
Credits to Coco and Pedro, creators of the vehicle. [read more]
well here is my first upload the the repository its a skin for the Mercedes-Benz Atego with CoMax-Body&Lift V2 the skin is for my company called rormart. you dont have to sign up to get the skin if you do wish to purchase or sign up here is the link: rormart
to install just put the DDS file in your MB-Atego-CoMax.zipMB-Atego-CoMax.zip and your done [read more]
MB LAF 1113 B TWH GKW 1
A truck of the german THW, federal agency of technical relief.
It features a light pole in the back, openable sides, a searchlight and a winch in the front.
Feel free to modify it, but make it not conflicting with the original one if you want to release it.
Kenworth Transfer Dump Truck
A transfer dump truck inspired by a request on the forum.
Credits go to Box5Diesel for his Kenworth truck.
For information on how the system works see the request and showrooms thread.
Feel free to modify, but use a different unique id to make it not conflicting with my truck.
Skins for Box5diesels Kenworth should work on this truck, but I'm not sure.
I've fixed a little bug with the material of the trailer dump box.
ModelT.zip
view details
)
Gold
Silver
Bronze
