37.00-R57 tire from a Komatsu 730E-7, load weight 4000kg, usable as a chock for other loads or to load onto a trailer for transport or to roll down a hill for a laugh.
if you wanna use it for something else add my name with it or at least send me a message.
the bridge is a base of the confederation bridge in canada.
It is 1km long (in real 14km ) and between 40 60 m heigh .
You can drive (in real only walk ) in the bridge, it is hollow.
The bridge is not complete ,you have only lift the brigdesections on the pillar,they are 200m long and weight 25t (in real 8000t )
I have made the bridge sections so light, it's now easy to lift with a high crane ( min 100m heigh ).
The ties on brigdesections are so long for stability.
IT DON,T WORK IN 0.37
MANUAL
1 first lift the brigdesection near a ramp so you can see the right position
2 Lift the triangle belowe the brigdesection over the top of the pillar.
3 Each side of the brigdesection must be higher than the near the brigdesection (when lower, the invisable surfaces don,t work)
4Llower the brigdesection about in the right position.
5 When it lean on the pillar ,you can pull (slowly) it, with the left mouse bottum on the right position .
In the right position it lock automatically.
IMPORTANT
to spawn the bridge in your flatmap, place these text in your flatmap.zip , in file f4afUID-flat_map_full32xa.terrn under name loads.
Authors: sirendude 2011 and various members for support.
This is a pack of all of the vehicles I have made in the past 4 months. All of the cars are N/B only, don't have submesh, and some have no engine tuning.
none of these vehicles float, and one car (siren's auto 12x12 special) has all wheel drive, all wheel steer, working reverse lights, headlights, brakelights, and turn signals (flares). Some vehicles have opening hoods and doors.
Vehicles in this pack:
a 6x6 pickup truck called "mud slinger" (includes a Monster Truck version)
a 4x4 pickup truck simply called "pickup truck"
a few muscle cars/ sportscars (they are "highway terror", "lancia delta N/B Car", "tire burner", and "muscle car")
a school bus
a few offroaders ( they are "rock locker", "redneckrickem's dune buggy" (a YouTuber's buggy), "traxxurator"+"traxxurator dump" and "4x4 offroader")
a motorcycle (it has training wheels for stability :P)
and an engine that uses negative shocks to run, just give it a spin with the mouse and it runs. (be careful it explodes after a certain RPM)
You have the freedom to do whatever you want to these vehicles, but give me credits for the vehicle's N/B.
To open a hood or door, press F1 - F4. These commands do different things like open and close a door or hood.
This is a mobile home or mobile office depends on how you use it. You can pull it to your location and pull the tires into the body and it will be on the ground like a house. It is a decent amount of weight 22046.23lbs. It is fun to pull around comments are greatly welcomed. This is a 10x40 trailer its not a CAMPER.
made by me
Update 1. made the tongue longer fixed the tires problems added more weight
This is my first upload. I made ?pallet of gold for you. They are four variants ( 1095 kg,1976 kg, 2912 kg, 3432 kg). Sorry for my bad english. Enjoy it
Autor: Pedro
Vojta1991
I was searching the forums recently, and discovered that there were no ramps to jump cars off of, so I decided to create one. This is a car-sized "Kicker" ramp based off of those that are used for skateboarding. It has a tow hitch so you can drag it around with trucks, so moving it is possible. It only weights 150 Kg, so most vehicles can tow it. As a side note, this is my very first mod for any game.
+Add more types of ramps, especially tilted ramps and sliced quarter pipe ramps.
Change Log:
V3:
+ Added New Twisted Ramp 'RoR Ramp "Twisted Kicker" - Plastic'
+ Added New Twisted Ramp 'RoR Ramp "Twisted Kicker" - Full Metal'
V2:
+ Renamed Original Ramp to 'RoR Ramp "Kicker" - Plastic'
+ Added New All Metal Ramp: 'RoR Ramp "Kicker" - Full Metal'
+ Full Metal ramp weighs more than Plastic ramp.
+ Plastic ramp is still compatible with people that still have V1
+ Fixed some errors.
[Moved Props section below nodes]
V1:
+Initial Release
Everything was created by me.
To Modders of Mods:
I know who I personally have given permission to mod this, so don't mod without permission.
Link to Discussion: RoR-Ramp (More Frequent Updates)
IMPORTANT!
Heavy vehicles or vehicles with large tires risk causing the ramps to slide. The ramps were designed for lighter vehicles and are physically designed to be light so they can be towed by normal vehicles such as SUVs or Pickup Trucks (Including the S10).
Here's an odd load, a computer! I thought of this one day while I was looking on the repository for loads. It's not too bad on fps, but it's not great. I may work on this more, but I'm not sure about it.
Enjoy a flexbody computer to smash in Rigs of Rods.
Do you want a modifiable version so you can make any computer you want? If so, please respond using the discussion link below.
this is my modification to Box5diesel's sledpull
I added an engine an other skin and a beacon
credits: Box5diesel for the original sledpull
and me ( jerom ) for the modification's
Rotexx-presseteil.zip
view details
Gold
Silver
Bronze
