UPDATE: I've been working on a variation of my own and it's complete, or close enough. It is fully submeshed and will contact with other vehicles(that must to be contactable). It's sides and tail can fold down. The rear rollcage can be lifted using Ctrl+F4/Ctrl+F6. It has ties in the back so you can drive an vehicle into it. Unfortunately all the stuff I added makes it too "tippy" to carry a vehicle into water anymore but driving on land is fine. Also has a trailer hitch that can be completely folded away if you're not going to use it. All controls are listed in-game. Have fun.
This is an Tatra 813 pack I modified from Pricordes original versions and added "Wheels2" to all of the models so you can inflate/deflate the tires. Also updated to work properly in the latest RoRs release as it was having texture issues before. Use [ to deflate and ] to inflate the tires. This is not as easy on your system as the originals were. They were only about 1300 beams before, now each has over 2800 to properly simulate the wheels.
NOTE: You will need to enable advanced wheels in the configurator under the "CPU" tab to enable "Wheels2" in versions older than 0.38.33.
Please note the credits for the crane go josh (1239) who made the original.
UPDATE
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
UPDATE2
fixed the spelling mistake on the ropables so they all work now
UPDATE 3
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
UNIMOG 406
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
Disclaimer:
-mods for personal use ok, but don't ask to release your super engine power lift kit mod, or to use the rims/tires on your vehicle to showoff, it ain't gonna happen, yo.
This is a mod to the BI3300 by BusMan1985. All that I've changed is the sounds. The engine has 2006 DT466 sounds and the others are from an International 4300 and an IC CE200
This is a 2005 International 3300. It has a 6.0L VT365 turbo diesel V8 engine and an Allison 2100 PTS transmission. It's built off the International 4200 chassis and is nearly identical to the International 3300
This is it after a few months: the Seridon Si14 from Seridon Motorhomes
This is my first creation from scratch, and it's a bit oversized. The next versions will be better scaled
In the next update it is colorable
Credits:
Me: n/b and mesh
haselnut116601: support, door n/b and loads of other stuff
rainingheavy: steeringwheel and placement
Scalefreak93: shocks
Nickster 7: wheels
bray: engine settings
I don't remember all the people who helped me, so report it to me if I forgot someone!
Pack now includes 2 P-boom versions.
----------------------------------------------------------------------------------------------------------------
This is the FLK-1500, a strong crawler crane and designed by AIN_002. The crane is not mapped but you can still skin some parts and change colors of meshes. I recommend downloading the skin pack from Rotexx. Uploading your own skin is allowed but please upload it as a skinzip.
Controls:
F1/2 - Rotating the crane
F9/10/11/12 - Moving the tracks
You can view the rest of the commands in the T-screen
This pack includes 6 cranes
- FLK-1500 with 108m boom
- FLK-1500 with 108m P-boom
- FLK-1500 with 58m boom
- FLK-1500-NT with 108m boom
- FLK-1500-NT with 108m P-boom
- FLK-1500-NT with 58m boom
There might be coming more version of this crane like something with a jib but that will be a matter of time.
This zip also includes counterweight for the crane, which can simply be locked to the back of counterweight-arm with L!
Oh and before more people start crying about this: The counterweight can't be lifted off the ground when there is no heavy load in the hook! (which is logical and real!).
Credits: AIN_002 - Started the project/modelled the crane. Rotexx - Did get the sounds for me. Craneman - Finished the whole project. Sputnik_1 - Tuning and helping with the CW trailer
This Pack have a lot of Skinzips for the Heavy Crawler Crane. The Skinzips are for the normal Crane Version - and the Skinzips with "NT" is for the Narrow Track Version.
This is an 8x8 Offroader based on a MAN-TGA chassis.
It is made for offroading so don't expect it to handle well at high speed.
However, I tried to keep it as highspeed-friendly as possible.
But the main aim is to perform well in rough terrain.
In the readme, there are instructions on how to enable the enclosed wheel meshes.
This vehicle features the "Driving right out of the package" concept.
So put it straight into your data/packs folder and you'll be fine.
Please note that it is my first vehicle and I''m still learning
Included in the pack is:
- Manitou telehandler with coupling for attachment
- Manitou telehandler with truss boom
- Manitou telehandler with winch
- Bucket attachment
- Forklift attachment
- Counterweight loads
Version 1.2
- Skin selection menu removed (download skin pack instead - see forum link)
- New torque curve
- Flares added
- Working lights/beacon added (Ctrl-1)
- New Manitou winch version
- 2 Counterweight loads
just a peterbuild. i have only done a submesh that is red. no mesh or emissive or something like that. i will see this one with a texture so work on now
This is the finished version of the ERF EC14 Wrecker & Loader that i started many months ago.
It has new UID's so they are standalone to any other version's of these vehicle's.
I have added a winch to the boom now so it is easier to rescue cars. If you find any problems or have any suggestions please post them in the discussion (Link below).
As with the numberplates bieng English i have done them to be realistic & are from the Prefix era. With the 1st letter meaning the trucks age in this case. These ERF's are M reg' so are from 1 AUG 1994 to 31 JUL 1995. http://www.number-plates-car-registr...ion_years.html
I have created the engine to be realistic of a derestricted ERF with a top speed of around 90mph. The engine is more powerful just below its max RPM so when it starts to struggle accelerating just change up a gear & it will keep going.
This is my "Löschgruppenfahrzeug 16/12" in english a Fire Engine.
You can open the doors of the cabin and the equipment structure with the F1 to F10 key.
In the back of the truck is a hose reel that you should load up.
So you can move the holder up and down with Ctrl+F1 and Ctrl+F2 and you can change the angle of the hose reel (Ctrl+F3 and Ctrl+F4) so its a little bit easier to hook it up (with "O")
Credits: The truck is copletely made by me (the Fire Extinguisher in the cabin is from the Sketchup Gallery and the wheel texture from RoR)
///Deutsch////
Hier ist mein Löschgruppenfahrzeig 16/12 (LF 16/12)
Man kann die Türen der Kabine sowie des Aufbaus mit den Tasten F1-F10 öffnen.
Die Schlauchhaspel hinter dem Auto kann man anhängen (mit der Taste "O")
dazu kann man die Halterung mit Strg+F1 oder Strg+F2 Hoch und Runter Bewegen.
Den Winkel der Schlauchhaspel kann man mit Strg+F3 und Strg+F4 ändern.
Credits: Das Fahrzeug habe ich bis auf den Feuerlöscher und die Textur der Reifen komplett selbst erstellt
Here is my Mercedes Benz SK B1 1224 THW.
It is based on the 16 TLF from FF_Neustadt where I changed the skin and truck file.
The original truck is from FF_Neustadt [read more]
This is a fire engine from the fire department Hamburg.
The Original was build from 1994/1995 by Mercedes Benz and Ziegler.
I used the tips from the older fire engines to work over the meshes so that there d´ont be any errors...i hope.
You can open the command list with the button "T" an hook on the hose reel with button "O"
The node/beam chassis and the meshes are build by me.
This is a Ladder Truck from the fire department Hamburg.
Build in 1995 from Mercedes Benz and Metz.
I has experimented with the slide node system and it works very well.
The command list can be opened by pressing button "T" and the ladder can be secured by pressing button "O".
The node/beam chassis and the meshes are made by me.
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-FIRE ENGINE (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-Fire Engine (MB NG 80)
-Equipment Vehicle (MB NG 80)
-LADDER TRUCK (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-TANKER TRUCK (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-Fire Engine (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-Fire Engine (MB NG 80)
-EQUIPMENT TRUCK (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second TANKER TRUCK with WATER CANNON (MB NG 80)
-Fire Engine (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
Tatra813Pack.zip
view details
Gold
Silver
Bronze
