Browsing tag Heavy Duty, found 55 matching files. (6 pages)
(updated on 5/8/11)
UPDATE: I've been working on a variation of my own and it's complete, or close enough. It is fully submeshed and will contact with other vehicles(that must to be contactable). It's sides and tail can fold down. The rear rollcage can be lifted using Ctrl+F4/Ctrl+F6. It has ties in the back so you can drive an vehicle into it. Unfortunately all the stuff I added makes it too "tippy" to carry a vehicle into water anymore but driving on land is fine. Also has a trailer hitch that can be completely folded away if you're not going to use it. All controls are listed in-game. Have fun.
This is an Tatra 813 pack I modified from Pricordes original versions and added "Wheels2" to all of the models so you can inflate/deflate the tires. Also updated to work properly in the latest RoRs release as it was having texture issues before. Use [ to deflate and ] to inflate the tires. This is not as easy on your system as the originals were. They were only about 1300 beams before, now each has over 2800 to properly simulate the wheels.
NOTE: You will need to enable advanced wheels in the configurator under the "CPU" tab to enable "Wheels2" in versions older than 0.38.33.
Please note the credits for the crane go josh (1239) who made the original.
**Cameras are fixed
3 Comments, add comments here.
(updated on 22/7/13)
Hello. This is my updated Scania wrecker with Scania v8 sounds. It should have all of the correct sounds, now. Like the previous version, it's much more powerfull and driveable with softened suspension and it still has those good ol' thumpin' and suckin' Scania v8 sounds and turbo sounds.
-Pricorde (original truck)
-Zikemester96 (original Scania DS-16 sounds)
-12444 (me) Fitting and editing the engine sounds and fitting the rest of the sounds
WARNING:do NOT forget to delete the old folder of this truck or this one will NOT work!!!!!!!! It will conflict with the old file!:WARNING
Enjoy this new and improved Scania wrecker and the sounds and tell me what you think of them.
No Comments yet. Add some here.
At long last, my very first proper vehicle pack for RoR!!! In this pack are a Kenworth k100 and a Peterbilt 379! They are basic node/beam structures and behave realistically and are tuned niceley to haul/pull a heavy load at high speed. They both ride VERY nice because they both have air ride cabs. The Pete has rear tandem bogie suspension (if you don't know what that is look it up on google) and the Kenworth has rear air ride suspension. They also have Cummins 6BT sounds by zikemester96 and they were edited and fitted by me. Enjoy these great trucks and if you want to release mods of these trucks, remember to credit me and zikemester96!
-Peterbilt and Kenworth: 12444 (me)
2 Comments, add comments here.
Credits first of all to Box5diesel for his 1stgens
These do not replace any originals.
Three new meshes for you to have fun with.
Install instructions: For .36 put it into the documents rigsofrods packs folder
For .35 unzip original 1stgen and then unzip this one into trucks folder
Thanks to all who enjoy my mods.
Next update will be new textures and improved chassis for dump box and utility truck.
Issues with trucks: two have the window a little off I did fix it a bit but if you want fix it and pm me.
5 Comments, add comments here.
(updated on 14/12/11)
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
fixed the spelling mistake on the ropables so they all work now
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
see this thread for issues or discussion
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
Originals from BigBoy
Kenworth T800 6x6 Flatbed regular frame
Kenworth T800 6x6 Logtruck
Kenworth T800 6x4 Tanker
Kenworth T800 6x6 Daycab regular frame
|Average Rating:||Tags:||Heavy Duty, Allwheeldrive, 8x8, 6x4, 6x2, 4x4, 4x2, Axle Configuration, Vehicle Keywords, Rigid, Semi, Transportation, Heavy Machinery||
Downloads today: 4, all time: 36494
64 Comments, add comments here.
(updated on 15/10/11)
This is the updated version of RoR's 1st ever Suspended Monorail System. It should now work with the latest 0.38 version.
After 10 months of work and development, it is finnaly finished.
Suspended Monorail System 2.2:
This new version includes:
-Fixed Cab Cameras
-Fixed Track Bugs
-Managed Materials (NEW)
-Working Sliding Doors (f1/f2)
-Directional lighting (,/.)
-Contactable Deck (goods only)
The Track Network:
-Fully controllable Points (f3/f4)
-Left & Right Curves
-Goods Loading Ramp
-Custom Non-overwriting N Helens Map
-Simply place the .zip in your: My DocumentsRigs of Rodsterrains
-Does Not Overwrite
-Unique N helens map
-Custom Sounds from the Free Sound Project
-Original N Helens Map by Pricorde etc.
-Everything else built from scratch by me, Al T.
-Thanks to the beta testers, coco for help with the engine and everyone on IRC for help or suggestions.
-Take corners no faster than around 40mph.
-Doors controlled by f1/f2
-Points controlled by f3/f4 from the trains (must be very close)
-Directional Lighting controlled by (,) and (.) or the indicators.
-The trains are allready on the track.
*Do not release a mod of this without my permission*
Discuss: Suspended Monorail System Forum Thread
Enjoy, Al T. 8)
27 Comments, add comments here.
(updated on 22/8/11)
Melroe M-880 Prime Mover
This is a prime mover for real heavy loads build out of a former wheeled skid-steer dozer. Like the real thing it does not have any suspension but a lot of power ;-) .
My RoR model features some animated parts like the cooling fans and levers inside the cab as well as some custom sounds.
Mesh and N/B all by me, please do not upload any mods without my permission, thanks :-) .
Discuss here: http://www.rigsofrods.com/threads/79...80-Prime-Mover
Update: GUID gernerator working again, it now has a GUID so feel free to release your sikns as a .skinzip file
|Average Rating:||Tags:||HighQuality, Construction Equipment, 8x8, Allwheeldrive, Heavy Duty, Offroad, Transportation, Other Land Vehicles, Heavy Machinery, Land Vehicles, HighQuality040||
Downloads today: 0, all time: 25538
20 Comments, add comments here.
A pack of flatcars (standart 40ft, bulkhead 40ft and heavy weight 8-axle), all come with different skins.
The couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
If you enter a flatcar through the vehicle selection menu game will crash if you try to exit the flatcar, simply change into another enterable vehicle via the menu and exit there.
sputnik_1 for helping me with adjusting the node/beam.
12 Comments, add comments here.
Deuce and a Half - M35 6x6
-Bobbed 4x4 dually
-Bobbed Lifted 4x4 Singles
-Tractor 5th wheel
-Real weight, real power, real scale. (so don't expect to tow the ror trailers that way a kabillion lbs.)
-Lockers (press W)
-Operational dump bed, & tailgate
-Contactable bed to load vehicles or objects with ties (press O to tie down load)
-Animated winches on all except cargo version, some even have a rear winch.
-Flexbody everything pretty much
-Detailed Animated Interior with shifter.
-custom deuce sounds, with added turbo
-Shader shows up black sometimes, restart ROR until it appears normal, or download boring material below and drop in deuce zip.
-5th wheel version breaks when hooking to some trailers
-No flexbody tires (would be way to cpu heavy, it already is)
If the Deuce shows up black in game more than a few times, you can use the material file in the download link below (put it in the deuce zip)
34 Comments, add comments here.