This is the dumper-version of my Mercedes Kurzhauber. Everything is made by me. Its ropable, so you could also carry it.
Its a bad frameeater, but you can deactivate the mirrors and the mesh-wheels if you ve poor framerates.
Its not already done, but for the moment its some nice stuff i think.
you can connect trailers to the front- and the back-hook
You can lower and lift the supports with F1/F2
You can lower and lift the Dumper with F3/F4
As long as you give me credits, you re allowed do verything you like to and that makes the trucks better.
Using parts of my trucks for your own project surely also allowed, only let the people know who has done the originals.
It was nice to get an PM if you plan to publish it on other sites than these.
UNIMOG 406
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
Disclaimer:
-mods for personal use ok, but don't ask to release your super engine power lift kit mod, or to use the rims/tires on your vehicle to showoff, it ain't gonna happen, yo.
Here is my latest Kenworth mod. This is a T600 "Anteater" which was first introduced in 1985 and was Kenworth's first aerodynamic truck and a very radical change from the W900 line. This specific model is powered by a C15 Caterpillar engine with a 13 speed transmission. It features a fully animated interior- guages, shifter, pedals and steering wheel. The truck also has diff locks for hauling heavy loads.
Huge thanks to Box5 for the original W900, Jerald for the sounds, Fidoj for fine tuning and everyone who provided support and motivation along the way.
In the pack is the photoshop file to create custom skins. The ambient occlusion names correspond to the truck names, i.e AO1 = T600_1, AO4 = T600_4, etc. (5 and 1 share AO1). When you save the skin as a .dds be sure you have the right AO layer selected and the others invisible, otherwise it'll be all screwed up.
Functions
All functions work by press once functionality, also winches, so when you press the extend button once, the winch will keep extending, until you press again.
F5-F6 Front Winch
F7-F8 Rear Winch
F9-F10 Doors
F11-F12 Drop sides
W Diff Lockers (Open, Rear Locked, Both Locked)
N Driving lights
Credits:
3D models, textures, N/B, truck -file and custom sounds are
by Masa
A shader script and a material script are by Box5Diesel.
Core beta testers and useful help: Braskus, Gabester, and many other forum members.
Thanks to all beta testers and to everyone else who helped me at the
forums.
This pack is my attempt to capture the Streamline Moderne style popular in the 1930s and 1940s. The vehicles are all fictional, but their performance is realistic. I hope you'll enjoy driving them as much as I have enjoyed making them.
1948 Martin T64S "Custom" Tractor
A very low-slung 6x4 tractor. It has independent front suspension with double wishbones and load sharing rear suspension. The engine is a naturally aspirated 12-cylinder diesel driving through a 7-speed gearbox and locking differentials. Overall length is 29 ft, wheelbase 22 ft from front axle to centre of rear axle group, width 102 in, height 14 ft 9 in to tip of smokestacks. Kerb weight is 20,000 lbs, gross combination weight 80,000 lbs.
Fully loaded, the T64S will reach a top speed of 60 MPH with one of the included trailers. It will accelerate from 0-50 MPH in 1 minute, 0-60 MPH taking approximately 2 minutes.
1948 Martin O40 Tanker
A streamlined tank trailer in fictional "Hexaco" livery. Steel unibody, load sharing suspension. Overall length is 40 ft, wheelbase 28 ft from kingpin to axle group centre, width 102 in, height 10 ft 6 in. Loaded weight is 60,000 lbs.
1948 Martin F45 Flatbed
A simple flatbed trailer with stainless steel load deck and load sharing suspension. The deck is submeshed with the rollon flag and has ties to secure loads. Overall length is 45 ft, wheelbase 36 ft from kingpin to axle group centre, width 102 in, deck height 59 in, overall height 79 in to top of bulkhead. Kerb weight is 12,500 lbs, rated load 47,500 lbs.
1948 Martin V59 "Streamliner" Dry Van
A very large and somewhat impractical dry van. It has a streamlined stainless steel unibody and load sharing suspension. Overall length is 59 ft, wheelbase 47 ft from kingpin to axle group centre, width 102 in, height 14 ft 9 in. Loaded weight is 60,000 lbs.
Notes
These have only been tested in Rigs of Rods version 0.38.67.
The wheels have 40 nodes each, and the meshes were made in Sketchup. Don't expect these to be FPS-friendly.
The trailers are roll coupled via the system used by Lenni and Badboy for trailer steering. The centre of gravity and suspension are tuned accordingly; the trailers may topple easily on trucks that lack these nodes.
To minimise rolling resistance, the wheels are pushing the limits of the beam engine. They tend to oscillate when stationary. Caution is advised when stopping or parking on slopes as they may creep.
The trailers have very low drag. The T64S will not pull most other trailers at high speed.
Licence
CGTextures does not allow redistribution of its textures under open source licences. You must remove/replace their texture before releasing modifications of this truck. All other assets used are available for modding. See the readme for specific file information and licensing details.
Features:
-Real weight, real power, real scale. (so don't expect to tow the ror trailers that way a kabillion lbs.)
-Lockers (press W)
-Operational dump bed, & tailgate
-Contactable bed to load vehicles or objects with ties (press O to tie down load)
-Animated winches on all except cargo version, some even have a rear winch.
-Flexbody everything pretty much
-Specular Shader
-Detailed Animated Interior with shifter.
-custom deuce sounds, with added turbo
Known issues:
-Shader shows up black sometimes, restart ROR until it appears normal, or download boring material below and drop in deuce zip.
-5th wheel version breaks when hooking to some trailers
-No flexbody tires (would be way to cpu heavy, it already is)
Brand and type: Mercedes Benz Atego Sleepwagen ANWB
Ingame name: MB Atego ANWB
Tested in: 0.38.57
This is an Standalone file!
I got permission from Lenni to release this back in April 2011, so I thought this would make a nice addition to the repo.
The ANWB is a dutch company that does most of the towing work in Holland. They basicly control the Roadside assistance branch.
The word ANWB stands for Algemene Nederlandse Wieler Bond.
It is meshed, and much higher quality. Credits:
Pricorde - Original bus
Derbymutt - Revival, meshes, re-texturing, n/b fixes and changes, shader stuff
Fradias - Wheels & Tires
Modding Policy:
Modding and releasing any content for this bus on a mod of it or on another vehicle is permitted and encouraged as long as due credit is given.
Basically, Mod away and give credit.
Info:
It is fully skinnable, if you do not like the plastic paneling on the bus, just comment out agora_fb.mesh and agora_rear_lights.mesh from the flexbody section as well as the forset line below them.
It is also deform-able and flexbody.
I have also used flexbodies for the tires, so that they work in multiplayer and still are deform-able and separate from the rim mesh.
This is a FINALLY released pack of tow vehicles COMPLETELY made by Thatsnice. I recieved this file with the request of doing flares and easing up on the FPS Drop.
Authors: Thatsnice (Node/Beam, Meshes), PArescueEMT (Flares and mesh editing)
I am releasing this with permission from TN as this seems to be a sought after mod.
10bb3UID-rundhauber-dumper.zip
view details
Gold
Silver
Bronze
