Browsing tag Transportation, found 24 matching files. (3 pages)
(updated on 15/10/13)
TATRA 815 VVN 8x8.1R V12 BITURBO without aircooler
Truck made 1:1 to real parameters
up to 12t usefull load
ror gear, tatra gear, reduction,
1. 1. L
2. 1. H
3. 2. L
4. 2. H
5. 3. L
commands under " T " ingame
IMPORTANT!!!!!!----------- For corectly load in to game remove original pack (tat.zip and all other early versions) and hit "clear cache" in settings->advanced tab (in rorconfig)
Special Thanks to:
Masfilip for cab model,texures and unstopable cooperation and helps
Lifter for share tyre mesh
works is still in progress , please rate and leave comment
forum link here TATRA-815-8x8-%28future-8x8-pack%29
DON'T MODE WITHOUT PERMISSION !
update: added ropable nodes
almost all meshes remodeled/retextured
new cab model and interior,
added sides for flatbed
and much more
31 Comments, add comments here.
(updated on 11/10/13)
Welcome to my Dieselpunk road train pack. Included are a locomotive (6 versions), 4 passenger consists, 3 freight consists, and a shunter. These can more or less be mixed and matched as you please. Enjoy!
The rear view camera can be zoomed in and out by pressing ctrl+1. Adjust the height of the trailer drawbars with F1 and F2. Set the transmission to full auto when in a locomotive (not necessary in the shunter). The trailers can be entered and have a Ringfeder coupling at the rear for daisy chaining (careful, the brakes on subsequent trailers will not work).
12x12x12 highway locomotive. 16-cylinder turbosupercharged diesel engine, diesel-electric transmission. Traction motors and steering on all axles.
Length 48 ft, weight 120,000 lbs. Maximum service speed 100 MPH (passenger) or 60 MPH (freight).
12x12x12x2 highway locomotive, with 1 booster. 16-cylinder turbosupercharged diesel engines, diesel-electric transmissions. Traction motors and steering on all axles.
Length 95 ft, weight 240,000 lbs. Maximum service speed 100 MPH (passenger) or 60 MPH (freight).
12x12x12x3 highway locomotive, with 2 boosters. 16-cylinder turbosupercharged diesel engines, diesel-electric transmissions. Traction motors and steering on all axles.
Length 142 ft, weight 360,000 lbs. Maximum service speed 100 MPH (passenger) or 60 MPH (freight).
3x2x1 highway shunter. Inline 8-cylinder naturally aspirated diesel engine, 4-speed diesel-mechanical transmission.
Length 27 ft, weight 48,000 lbs. Maximum service speed 40 MPH.
Relax in airplane-style seats with generous legroom in coaches 1 and 2, enjoy the view from the rear observation lounge, or get some refreshments or a light meal in the bar.
3 cars. Length 212 ft, weight 160,000 lbs. Maximum service speed 125 MPH.
Choose between airplane-style seating in coaches 1 and 2 or table groups in coaches 3 and 4, enjoy the view from the rear observation lounge, or have a drink or light meal in the bar.
5 cars. Length 336 ft, weight 240,000 lbs. Maximum service speed 125 MPH.
Choose between airplane-style seating in coaches 1 and 2 or table groups in coaches 3 and 4, marvel at the view from the rear observation lounge, visit the bar for drinks and snacks, or enjoy a delicious 3-course meal in the dining car.
7 cars. Length 461 ft, weight 320,000 lbs. Maximum service speed 125 MPH.
The choice is yours between single or 2-abreast airplane-style seats in coaches 1 and 2, 1+1 and 2+2 table groups in coaches 3 and 4, or 3+3 compartments in coaches 5 and 6 - legroom is generous throughout. Watch the latest newsreels in the theatre, visit the library for a vast selection of national and international newspapers, magazines, and books, and arrange meetings or send telegrams on the move in the conference room. The rear lounge offers a spectacular view of the landscape through panoramic windows, and the adjacent bar offers all manner of drinks, snacks, or even light meals. For a truly gourmet experience, the world-class kitchen on wheels offers exquisite 3-course meals in the dining car.
10 cars. Length 648 ft, weight 440,000 lbs. Maximum service speed 125 MPH.
Freight Consist 1
Expedited freight. Reefers and mail vans.
9 cars. Length 400 ft, weight 400,000 lbs. Maximum service speed 75 MPH.
Freight Consist 2
Hazardous goods. Chemical and fuel tankers.
10 cars. Length 387 ft, weight 440,000 lbs. Maximum service speed 75 MPH.
Freight Consist 3
Bulk freight. Timber trailers and coal hoppers.
8 cars. Length 296 ft, weight 440,000 lbs. Maximum service speed 75 MPH.
Made for version 0.38.67. Other versions are generally untested and may or may not work.
The wheels may oscillate when stationary because they are optimised for low rolling resistance. Exercise caution when stopping or parking as they tend to creep.
The longer consists are extremely CPU-heavy. Expect very low frame rates if you connect multiple long trailer consists.
These vehicles are not designed to deform realistically in a crash.
Except for the front and rear, collision meshes are disabled for performance reasons. They can be reenabled by removing the 'comment' and 'end_comment' lines in the submesh section of the .truck or .trailer file.
tiredoldwhiteman - sound
Zabuhailo - sound
BigBoy - sound
flyer3849 - sound
James - sound
Davded - engineering consultant
sputnik_1 - engineering consultant
JensLynIV - all
With the exception of the sounds provided by BigBoy, all assets used are available for modding with no further permission needed. See the readme for specific file information and licensing details.
Maps in screenshots: La Paz, Lone Peak, Wild West.
15 Comments, add comments here.
A Genie s-60
f1-f2 rotate base
f3-f4 raise/lower arm
f5-f6 tilt basket
f7-f8 extend/retract boom extension
f9-f10 rotate basket
f11-f12 tilt macine side to side
NOTE only use when on unstable ground
sputnik_1: guidance on how to fix the triggers on the basket rotator
DJ|Jasper: sounds and support
negativeice: everything else
9 Comments, add comments here.
(updated on 31/3/13)
Map: La Paz.
This pack is my attempt to capture the Streamline Moderne style popular in the 1930s and 1940s. The vehicles are all fictional, but their performance is realistic. I hope you'll enjoy driving them as much as I have enjoyed making them.
1948 Martin T64S "Custom" Tractor
A very low-slung 6x4 tractor. It has independent front suspension with double wishbones and load sharing rear suspension. The engine is a naturally aspirated 12-cylinder diesel driving through a 7-speed gearbox and locking differentials. Overall length is 29 ft, wheelbase 22 ft from front axle to centre of rear axle group, width 102 in, height 14 ft 9 in to tip of smokestacks. Kerb weight is 20,000 lbs, gross combination weight 80,000 lbs.
Fully loaded, the T64S will reach a top speed of 60 MPH with one of the included trailers. It will accelerate from 0-50 MPH in 1 minute, 0-60 MPH taking approximately 2 minutes.
1948 Martin O40 Tanker
A streamlined tank trailer in fictional "Hexaco" livery. Steel unibody, load sharing suspension. Overall length is 40 ft, wheelbase 28 ft from kingpin to axle group centre, width 102 in, height 10 ft 6 in. Loaded weight is 60,000 lbs.
1948 Martin F45 Flatbed
A simple flatbed trailer with stainless steel load deck and load sharing suspension. The deck is submeshed with the rollon flag and has ties to secure loads. Overall length is 45 ft, wheelbase 36 ft from kingpin to axle group centre, width 102 in, deck height 59 in, overall height 79 in to top of bulkhead. Kerb weight is 12,500 lbs, rated load 47,500 lbs.
1948 Martin V59 "Streamliner" Dry Van
A very large and somewhat impractical dry van. It has a streamlined stainless steel unibody and load sharing suspension. Overall length is 59 ft, wheelbase 47 ft from kingpin to axle group centre, width 102 in, height 14 ft 9 in. Loaded weight is 60,000 lbs.
These have only been tested in Rigs of Rods version 0.38.67.
The wheels have 40 nodes each, and the meshes were made in Sketchup. Don't expect these to be FPS-friendly.
The trailers are roll coupled via the system used by Lenni and Badboy for trailer steering. The centre of gravity and suspension are tuned accordingly; the trailers may topple easily on trucks that lack these nodes.
To minimise rolling resistance, the wheels are pushing the limits of the beam engine. They tend to oscillate when stationary. Caution is advised when stopping or parking on slopes as they may creep.
The trailers have very low drag. The T64S will not pull most other trailers at high speed.
CGTextures (restrictions apply, see below)
CGTextures does not allow redistribution of its textures under open source licences. You must remove/replace their texture before releasing modifications of this truck. All other assets used are available for modding. See the readme for specific file information and licensing details.
|Average Rating:||Tags:||HighQuality040, HighQuality, Tanker, Flatbed, Box body, Trailers, 6x4, Semi, Transportation, Heavy Machinery, Land Vehicles||
Downloads today: 3, all time: 13033
22 Comments, add comments here.
ideal for heavy loads as:
bricks, cement, steel objects and loads that are not fragile.
(flatbed with redilas)
for farm work, transport of animals and other objects that need to be contained.
(tank diesel pemex)
PEMEX transport truck.
You are allowed to change the skin.
Coca Cola transport truck.
You are allowed to change the skin.
sorry if I forgot something, it's because I'm so distracted.
7 Comments, add comments here.
This is the revival mod for pricorde's Agora S
It is meshed, and much higher quality.
Pricorde - Original bus
Derbymutt - Revival, meshes, re-texturing, n/b fixes and changes, shader stuff
Fradias - Wheels & Tires
Modding and releasing any content for this bus on a mod of it or on another vehicle is permitted and encouraged as long as due credit is given.
Basically, Mod away and give credit.
It is fully skinnable, if you do not like the plastic paneling on the bus, just comment out agora_fb.mesh and agora_rear_lights.mesh from the flexbody section as well as the forset line below them.
It is also deform-able and flexbody.
I have also used flexbodies for the tires, so that they work in multiplayer and still are deform-able and separate from the rim mesh.
6 Comments, add comments here.
DarthCain : T800 Cab/Chassis, Mesh modification, Skinzip, Skins, Support
Fastruck : Jerr Dan Wrecker body, Support
Joe Swanson: Strobe Lights, Support
Thatsnice: Meshes, N/B, Flares, Mesh Modification
F1-F2 Main Boom Down/Up
F3-F4 Boom In/Out
F5-F6 Left Winch Up/Down
F7-F8 Right Winch Up/Down
F9-F10 Under Reach Fold/Unfold
F11-F12 Under Reach In/Out
F1-F2 Under Reach Boom Down/Up
F3-F4 Left Stabilizer Up/Down
F5-F6 Right Stabilizer Up/Down
F7-F12 Toolbox Doors Open/Close
F1-F2 Hood Close/Open
CTRL 1 Lightbar/Strobes
CTRL 2 Highbeam Lights
ALT + L will release the hooks from the boom when they are secured.
The boom is rated for 50 tons retracted and about 15 tons fully extended with boom mostly down (which is almost spot on with the real truck)
The under reach is rated for about 40 tons although I'm sure it may handle more.
This truck took a lot of hard work from my "team" and we are all very pleased with how it turned out, I hope you enjoy it as much as we do.
Please DO NOT MODIFY truck without asking me for permission
5 Comments, add comments here.
This is the dumper-version of my Mercedes Kurzhauber. Everything is made by me. Its ropable, so you could also carry it.
Its a bad frameeater, but you can deactivate the mirrors and the mesh-wheels if you ve poor framerates.
Its not already done, but for the moment its some nice stuff i think.
you can connect trailers to the front- and the back-hook
You can lower and lift the supports with F1/F2
You can lower and lift the Dumper with F3/F4
You find find the WIP-Thread for my Mercedes trucks here:
As long as you give me credits, you re allowed do verything you like to and that makes the trucks better.
Using parts of my trucks for your own project surely also allowed, only let the people know who has done the originals.
It was nice to get an PM if you plan to publish it on other sites than these.
4 Comments, add comments here.
This is the Grumman Long Life Vehicle (LLV), most commonly referred to as the Mail Truck. This vehicle is used by the USPS, but it is also used by the Canadian and Mexican postal service.
Forum Thread- Grumman-LLV-%28USPS-Mail-Truck%29
Made by me and only me.
This thing has the tightest turning radius of any vehicle I've ever made. One of Box5Diesel's old methods is used. Put the hydros inside the wheel diamond, not alongside the suspension arms or in the axle.
This can play an interesting role in Roleplay groups and servers
3 Comments, add comments here.
(updated on 16/5/13)
These are two of my favorite trucks, 1975 Chevrolet Titan 90 and GMC Astro 95.
The Astro 95 and the Titan 90 both have a Detroit 8v-71 318.
updated again with Sounds, The Titan is now longer in the GN Empire Builder Scheme
She's painted like my Titan model. Big Sky Blue and White with Black and gold stripes.
Now Without Visor, And Detroit 318 Straight pipe Sound Added.
Model - dneufeld
Wheels - Hemiboy
Adding the wheels - DougFunnie
Skins and tuning - MADDRIX
Sounds - MADDRIX - NRS91
3 Comments, add comments here.