Here it finally is! The Bombardier ALP-45DP dual powered locomotive.
It comes in two different liveries, AMT (Canada) and NJT (USA).
Both a version of the locomotive in diesel and in electric mode is available, only difference are the sounds and the removed exhausts on electric version.
Please carefully read the instructions BEFORE posting useless questions:
Use the train spawner placed on the map (small building where it says "Trains") or place it on a straight track piece via the .terrn file, DO NOT spawn in the truck spawner this will not work.
The ALP uses default truck controls. Always stay in automatic-transmission, it will not shift in the second gear!
F5/F6: to rais or lower the pantograph.
CTRL + 1: change directional lighting
CTRL + 2: front ditch lights
CTRL + 3: front lights
CTRL + 4: rear ditch lights
CTRL + 5: rear lights
CTRL + 6: wipers
The knouckle couplers couples other trains (using the same coupler, of course...) like other ALP's automatically. When coupled, both carriages are connected to each other ingame. If you want to uncouple two carriages, you need to unlock couplers on BOTH carriages in between you want to uncouple. The ALP has a small lever next to the rear knuckle coupler (with a lock/unlock-sign next to it) that can be grabbed by mouse. Pull to "unlock" position on both carriages and done. Not that complicated.
sputnik_1 - Without him this would not have been possible. He made trains actually work in Rigs of Rods (as you will see after reading this and testing the locomotive), outgoing from donoteats basic layout design. Furthermore he helped a lot with tweaking the ALP, to make it drive as good as it does. Many many thanks mate!
donoteat - He once had the idea to bring trains to RoR and made the great layout we are now using.
And thanks to the inveted members who tested this!
Added ropables so it can now be lifted with a crane.
Game might crash when you want to couple two ALP's, to avoid this disable high quality refelctive effeckts!
2008 KME Predator fire engine, based on the fire engine from Butler NJ.
- Openable doors and windows
- Tilting cab
- Animated props; driveshafts, light switches, pedals, dashboard needles...
- Can simulate engine torque twisting force (RoR first)
- Comes in 2 versions; caterpillar and detroit, both equiped with allison 5 speed auto transmission
- 22 commands (F1 to Ctrl+F12)
- 9 custom lights (Ctrl+1 to 9)
-Default light bar flares showing on the roof when "M" was pressed
-Broken turn signal
-Mirrors are back again
-Added Eminox's engine/gear ratio & driving aids
-Now accept .skinzip files
-Detroit and Caterpillar version are combined into the same .truck file, use the in-game menu to make your choice.
Starling 911, this is Starling Engine 1 responding. Yes ladies and gentlemen, I this is my first upload, and I have made a skin for the KME Preditor by Cydvx and Pascal. With Cydvx's permission I am releasing it. Now mind you this is a Standalone skin, Instructions are in the zipfile. they should help you.
Credit: Cydvx and Pascal for the original KME and Blank skin [read more]
Trailer P-32 is designed for quick transport wheeled and tracked vehicles and other material to the weight of 40 tons. In an emergency, up to 46 tons, maximum speed may be 10 km / h Is designed for off-set with tractor on roads I to III. class, the roads are paved and after tolerable terrain without external imbalances and obstacles.
Technical and tactical data
- Total length (including shaft): 9475 mm
- Overall height: 1420 mm
- Height of the loading area: 1000 mm
- Overall width: 3100 mm
- Wheelbase: 4410 mm + 1000 mm
- Length: 4900 mm
- Width: 3100 mm
- Standby: 10,600 kg
- Payload: 40,000 kg
So this is the new version of the "highliner" double deck EMU, commonly found on the Metra Electric lines in Chicago. This is a 2 car arrangement only. 4, 6 and 8 car versions are in development however, there seems to some issues with nodes2 and slidenodes.
-Working Doors F5/6/7/8
-Working Pantographs F9/10
-Unfinished Cab Interior
-Realistic(ish) acceleration and top speed
Installation & Safe Usage:
-Place the file "highliner.zip" in the packs folder.
-Don't drive round very sharp corners over 30mph.
-Don't try and switch tracks over 50mph.
-Don't try and couple this to any other train. I know it's tempting but it's an EMU you idiots.
-Support/Comments: Forum Thread
-To spawn on train valley add this line to the .terrn:
This is a mod to box5's goose neck. I made it shorter and made it have two axles. The mod was simply to make it look better when hauling stuff around. In my opinion the normal one is a little large.
Original trailer is box5s
Mod by me
And i know the mod isn't perfect. May over write the old one.
Original file http://www.rigsofrods.com/repository/view/585#comments
This is a desert island, it has no roads but tracks are marked with washed-up logs. There is a few very small settlements dotted around the island.
You start on a peninsula in the midde of the bay and drive across the sunken bridges to get to the island.
You'll need a decent offroad car as there's a section where the track dips underwater, and quite a few large mounds in the roads (where I didn't quite do the heightmap right lol)
LJFHutch: Every single non-default object in the terrain (most of the objects I have taken from his Greece map).
PsychoDog: The actual terrain.
F1 Terrain Creator: V1.2 uses trees from the F1 Test Track.
Some fixes and improvements to the island. For the full list of all the edits read the readme. The main edits I've made is to the sunken bridges on the penninsula (I've got rid of the log section since that caused some problems when you drove over it) and added a couple more tracks and buildings. Also added some crops to the farmers field so it's not just green ground any more.
Never released Versions 1.1 - 1.19 because I didn't think there was a big enough change to justify a reupload, so this is the first update. Please tell me if I've screwed anything up that was correct in V1 and I'll fix it.
This works best with 0.38.67. If you use 0.39 there may be some extra bugs (e.g. I had a lot of collision problems when I tested with anything newer than 0.38.67) and things may not look quite right. No fixes are planned for obvious reasons (0.4 is going to be the next release, not 0.39).
*PLEASE DELETE THE OLD ZIP (Zyk.zip) BEFORE YOU DOWNLOAD THIS ONE!*
A Scania ampliroll, based on the default Scania loader by Pricorde. I made this a while back (now added UID and a miniature file).
Works nicely in the latest version(0.38.43). NOT tested with older versions.
Pricorde - the default 6x6 Scania Loader
Scania & Pricorde - the skin
Me(Aivar) - ampliroll mod
Pull the trailer next to the load so the rear part is at the right place.
Disconnect the rear part with F11 and pull the front part to the front attachment point.
Use a crane to put the load on, the wood load also has invisible legs so it can be loaded without crane, use F9/10.
The steering strength can be adjusted with F5/6 to fit to the length of the load.
The rear part has manual steering for special situations: F7/8, don't use when the steering is already at maximum angle!
The legs fold in automatically if you pull them up with F1, hold F2 until they fully fold out.
The load will attach on the trailer automatically once it is close enough to the right position.
To unload push F12, but attach it to a crane first and put enough tension until the trailer almost lifts off!
Thanks to Lifter for the hookgroups and triggers and for support with this project!
Thanks to fidoj for his roof part load!
Please do not modify this without my permission,
skins can be added using the skin file system: skins-working
If this system is used properly then no need for my permission for skins.
this is the engine start and sound of my newest upload the armada, just go to...
-rigs of rods folder
-and replace the two files(note:this work fine but if i dont now for power of the destinity you have trouble just make a back up of the original 2 files
-the names are(default_car_idle.wav)and(default_starter_start .wav)
- Detailed meshes
- Animated cab
- Realistic buffers, coupling, suspension
- Custom sounds
- Click here for a tutorial how to couple
- F4 Wipers
- F5/6 coupling in the back
- F7/8 coupling in the front
- F9/10 coupling bar length in the back
- F11/12 coupling bar length in the front
- Ctrl + 1/2: Lights
- Ctrl + 3: speedo illumination
- Ctrl + 4: interior lights
- sputnik_1: meshes, node and beam, sounds, textures
- BigBoy: much help and testing, thanks a lot!
- The Inviteds: testing
Not compatible with BigBoys Bombardier ALP!
Update: Now including the blue and red skin. Please notice: The flares don't work when you choose the blue or red skin!
This is The F-150 Raptor SVT from Ford.
Has leaf springs at the rear with some really nice travel. on the front double A arms for each wheel with fair amount of travel.
real fun to cruise. has tow hitch for towing thingies.
Not much of exciting look since it is only N/B chassis but i find those kind of trucks most pleasing.
A pack of flatcars (standart 40ft, bulkhead 40ft and heavy weight 8-axle), all come with different skins.
The couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
If you enter a flatcar through the vehicle selection menu game will crash if you try to exit the flatcar, simply change into another enterable vehicle via the menu and exit there.
sputnik_1 for helping me with adjusting the node/beam.
A Dutch skin for the Mercedes Atego Metz aerial firetruck.
It's a skin based on the Mercedes Atego from the fire department of Middelburg, Zeeland in the Netherlands.
I have tried to make it as real as possible, but because this firetruck is an older Mercedes Atego version than the one in use by the firedept. I could not exactly reskin all parts correctly.
I hope you like it!!
Pedro (Atego Chassis)
firepics (Firetruck body etc.)
Ruben (Dutch skin)
Install: Just overwrite the files in this .zip with the .zip of the Mercedes Atego aerial firetruck
Hey guy's after a long few weeks the public beta is here!!! Its my garden tractor, this pack only contains the Stock, and Race, and Bucket Loader versions of the tractor. Once i have more time more will be added so tell me what you guys think of it Also remeber this is BETA, not compleatly Done! Haha anyways this is also my first creation so constuctive critisisum is welcome, good or bad Thanks hope you enjoy it.
Also, If you wish to attach attachments to the Bucket Loader version you will need the pack listed below. It is the manitou MLT 731 telehandler v1.2, The Bucket And Forks will work on my tractor, So again tell me what you think and enjoy this thing, I have worked very hard on it
It can load 1x 40', 45' or 48' are also possible, but that may result in too much front and rear overhang and then the container might hit the tractor unit.
The other possibilities are 2x 20', 1x 20' in the middle or at the end with retracted chassis back.
You can extend and retract the rear end to fit different containers on, and it is possible to adapt the suspension to different heights and loads,
the command keys show up in the ingame preview.
There is also a version with two containers fixed to the trailer for people who don't bother loading or unloading it.
If you want to reskin it please use the GUID system and skinzip files, then you can upload your skins to the repo.
Don't modify anything else or use parts of it on other models without my permission please.