This is the trailer I started a ways back its not done but I am not continuing with it because I am working on something else. I also lost the original unwrap so I have to redo that and really don't wanna redo that. So I figured I would share at least what I have done if some whats to fix/mod what ever do so freely.
Only author is me.
Known problems-handle mesh twitch's, suspension is really stiff, ties are to tight
here is a set of 2006 Lamar tandem axle trailers me and Crazyjoe made the first one has a ramp for loading cars and tractors and such the secound one has no ramp and is for huling loads like hay bails logs craits or whatever you have that requires a trailer with ought a ramp please place in packs and enjoy. WARNING This trailer is not to be modded withought permission from myself and Crazyjoe.
commands:
ctrl+F1/F2 to lift the landing gear up and down
ctrl+F3/f4 to let the rear gate down
O to activate ties once load is on trailer
Credits:
Jerald9000: node and beam chassis
Crazyjoe: all meshes and mesh wheels
Bjytech: flairs
Donoteat: wheelbands
Big thanks to all beta testors
Dieselmaster
EdTheNerd
MadMike
Sushi
Bjytech
Clown
This pack is my attempt to capture the Streamline Moderne style popular in the 1930s and 1940s. The vehicles are all fictional, but their performance is realistic. I hope you'll enjoy driving them as much as I have enjoyed making them.
1948 Martin T64S "Custom" Tractor
A very low-slung 6x4 tractor. It has independent front suspension with double wishbones and load sharing rear suspension. The engine is a naturally aspirated 12-cylinder diesel driving through a 7-speed gearbox and locking differentials. Overall length is 29 ft, wheelbase 22 ft from front axle to centre of rear axle group, width 102 in, height 14 ft 9 in to tip of smokestacks. Kerb weight is 20,000 lbs, gross combination weight 80,000 lbs.
Fully loaded, the T64S will reach a top speed of 60 MPH with one of the included trailers. It will accelerate from 0-50 MPH in 1 minute, 0-60 MPH taking approximately 2 minutes.
1948 Martin O40 Tanker
A streamlined tank trailer in fictional "Hexaco" livery. Steel unibody, load sharing suspension. Overall length is 40 ft, wheelbase 28 ft from kingpin to axle group centre, width 102 in, height 10 ft 6 in. Loaded weight is 60,000 lbs.
1948 Martin F45 Flatbed
A simple flatbed trailer with stainless steel load deck and load sharing suspension. The deck is submeshed with the rollon flag and has ties to secure loads. Overall length is 45 ft, wheelbase 36 ft from kingpin to axle group centre, width 102 in, deck height 59 in, overall height 79 in to top of bulkhead. Kerb weight is 12,500 lbs, rated load 47,500 lbs.
1948 Martin V59 "Streamliner" Dry Van
A very large and somewhat impractical dry van. It has a streamlined stainless steel unibody and load sharing suspension. Overall length is 59 ft, wheelbase 47 ft from kingpin to axle group centre, width 102 in, height 14 ft 9 in. Loaded weight is 60,000 lbs.
Notes
These have only been tested in Rigs of Rods version 0.38.67.
The wheels have 40 nodes each, and the meshes were made in Sketchup. Don't expect these to be FPS-friendly.
The trailers are roll coupled via the system used by Lenni and Badboy for trailer steering. The centre of gravity and suspension are tuned accordingly; the trailers may topple easily on trucks that lack these nodes.
To minimise rolling resistance, the wheels are pushing the limits of the beam engine. They tend to oscillate when stationary. Caution is advised when stopping or parking on slopes as they may creep.
The trailers have very low drag. The T64S will not pull most other trailers at high speed.
Licence
CGTextures does not allow redistribution of its textures under open source licences. You must remove/replace their texture before releasing modifications of this truck. All other assets used are available for modding. See the readme for specific file information and licensing details.
Here is a 2003 53 foot Great Dane dryvan that I made with Crazyjoe it has opening doors and a contactable inside so you can load crates cars or whatever you pleas into it. The sides of the trailer and the doors are sinkable if you have any questions see the forum link below. Trailer body is fully mesh and has moving mudflaps too.
This is a Cincinnati Bengals skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder.
This is a Detroit Lions skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder
This is the Mercedes Benz Actros 8x8 pack.
This package includes 8 versions:
- version with no upper part
- ampliroll
- cartransporter (+trailer)
- dumper
- log truck (+trailer NEW!)
- box-truck(+trailer NEW!)
- flatbed (+trailer NEW!)
- trail-truck
Trailer P-32 is designed for quick transport wheeled and tracked vehicles and other material to the weight of 40 tons. In an emergency, up to 46 tons, maximum speed may be 10 km / h Is designed for off-set with tractor on roads I to III. class, the roads are paved and after tolerable terrain without external imbalances and obstacles.
Technical and tactical data
Dimensions:
- Total length (including shaft): 9475 mm
- Overall height: 1420 mm
- Height of the loading area: 1000 mm
- Overall width: 3100 mm
- Wheelbase: 4410 mm + 1000 mm
Loading area:
- Length: 4900 mm
- Width: 3100 mm
weights:
- Standby: 10,600 kg
- Payload: 40,000 kg
This is a twamco 40 ft tilt deck trailer me and Crazyjoe made it includes custom mesh wheels and mesh body, as far as i have tested it will hold from small vehicles like the bobcat cars and trucks, and all the way up to heavy machinery like the zetor tractors the 450 dozer and the v2 excavator also the MC roler. Goes best behind dump trucks and medium duty trucks like the 1st gen or dodge rams by box5. Please enjoy our trailer to full exstent. WARNING mods to this trailer amy not be released with-ought permission, see me on the forum for details. Their also may be breaking beams on startup just ignore this problem.
This my Goldhofer STNL3-Platform trailer "Speedy".
"Speedy" is a very flexible and light platform trailer.
Commands:
CTRL+ALT+F1/+F2: lower/raise trailer legs
CTRL+ALT+F3/+F4: lock/unlock steering (lock for reverse driving or extending trailer/steering is locked when trailer spawnes)
CTRL+ALT+F5/+F6: extend trailer
CTRL+ALT+F7/+F8: raise/lower liftaxle
CTRL+ALT+F9/+F10: raise/lower trailer ramps
Note: All commads exept ramps are one-press-commands.
Hope you like it :-)
*BUG FIX* LATEST UPDATE
I'd like to say I've fixed the "Big Tex Goseneck.load"
*ever sense .38's "Pinguinville" came out there have been various conflicts with the map's and it's own materials & meshes, merely the extent to which I altered the trailer is merely changing the mesh names to void such conflicts*
*-all credit belongs to the original authors!!! I only modified material names!!
"Fixed" list:
*wheels
*spawning errors on Pinguinville & Minima
*wheel-face bug
*suspension is on the wheels,where it should be, not on the ramps
*the jacks raise and lower a little funny, but they work
*also added two axel version with (slightly) less moving when parked, and backing-up bug is fixed
the sliding-around-while-parked bug is still unsolved...if you have suggestions (or soulutions ^.^) to fix it plz let me know(PM me)
if any other problems protists feel free to pm, but remember i just fixed some bugs, skinning and stuff is tangycrose 's domain
All credit is held by:
tangycrose & Box5
It can load 1x 40', 45' or 48' are also possible, but that may result in too much front and rear overhang and then the container might hit the tractor unit.
The other possibilities are 2x 20', 1x 20' in the middle or at the end with retracted chassis back.
You can extend and retract the rear end to fit different containers on, and it is possible to adapt the suspension to different heights and loads,
the command keys show up in the ingame preview.
There is also a version with two containers fixed to the trailer for people who don't bother loading or unloading it.
If you want to reskin it please use the GUID system and skinzip files, then you can upload your skins to the repo.
Don't modify anything else or use parts of it on other models without my permission please.
Here is a skin for the Kenworth T600 and a 2 axle tanker trailer. The skin is based off of fuel delivery trucks for HESS gas stations. I made the skin as close to the actual paint job as possible.
Credits:
Kenworth T600 - HemiBoy95 & Box5Diesel
Tanker Trailer - Trevor
Inspiration - My father
Skins - Venem (me)
This is my modded virsion of the sliding flatbed i modded a while back so i finally wanted to mod and make it better. it works like and actuall landoll trailer. have fun and keep the wheels about where i have them in the picture cause if u go any further it will break, also keep ur parking brake off to move the wheels. this is a trailer
Commands
dolly legs: f1 f2
wheels forward and backward: f3 f4
up and down: f5 f6
Here is the first US rolling stock, so you can finally tow some waggons with my ALP.
A loadable 40ft boxcar, comes in several liveries.
You can open the doors by grabbing the levers at the doors, the couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
Known bugs:
If you enter a boxcar through the vehicle selection menu game will crash if you try to exit the boxcar, simply change into another enterable vehicle via the menu and exit there.
Thanks to:
donoteat, maddrix for skins
sputnik_1 for helping me with adjusting the node/beam.
This is a mobile home or mobile office depends on how you use it. You can pull it to your location and pull the tires into the body and it will be on the ground like a house. It is a decent amount of weight 22046.23lbs. It is fun to pull around comments are greatly welcomed. This is a 10x40 trailer its not a CAMPER.
made by me
Update 1. made the tongue longer fixed the tires problems added more weight
This is a complete overhaul of the older arrow board trailer I made all those years ago. It's been completely rebuilt from scratch. It consists of a basic frame, and a basic mesh, so it should be pretty easy on your computer.
Note: While the board and legs may be raised and lowered from the tow vehicle (if it has the forwardcommands tag), you'll have to manually enter the trailer to activate and deactivate the lights.
Features
- Detailed meshes
- Accurate kinematics
- Realistic lifting capacity (refer to the board on the crane!)
Instructions
Start the engine and put the Crane in NEUTRAL!
- F1/F2: Rotate
- F3/F4: Trolley (use throttle to speed up if needed)
- F5/F6: Hook Up/Down (use throttle to speed up if needed)
- F7/F8: Extend/Retract Jib
- F9/F10: Raised-jib working angle
- Ctrl+F1/F2: Assemble/Disassemble
- Ctrl+F3/F4: Outriggers
- Ctrl+F5/F6: Legs
- Ctrl+F7/F8: Trailer wheel up/down
- Ctrl+F9/F10: Turn trailer wheel
- And as usual lock loads with "o"
You can also see the commands by pressing "T" ingame.
Basical procedure: Ctrl+F4 to fold outriggers; Ctrl+F6 once for legs, Ctrl+1 [NOT F1!] to display the baseplates, Ctrl+F6 again for legs. Then Ctrl+F2 to erect the crane automatically. Jib control is on F7/F8. Jib angle is on F9/F10. Retract automatically on Ctrl+F1.
Credits:
- sputnik_1: meshes, node and beam, sounds, textures
- BigBoy, Craneman, Lifter, Inviteds, Donators: testing and help, thanks a lot!
This is a trailer I made from Pricordes semiflat. The main middle frame is the same, but u can see the changes. It has tie downs in numorous spots for vehicles of all sizes. Gooseneck style hitch and neck, new texture, new ramps, and it can fit the behemoth (barely), lol. This was to be a pack with the duece, but I might attach it later to the duece so u can tow it around in multiplayer.
*BUG FIX* LATEST UPDATE
I'd like to say I've fixed the "Big Tex Goseneck.load"
*ever sense .38's "Pinguinville" came out there have been various conflicts with the map's and it's own materials & meshes, merely the extent to which I altered the trailer is merely changing the mesh names to void such conflicts* [read more]
I turned the cement truck into a trailer by removing the cab and the 2 front axles.
The drum is enlarged to fit the frame, total length is only 8 meters/27 foot and it weighs 20 tonne.
Despite having the load nodes at the bottom of the frame, it still want to tip over.
Known bug: Because the drum is stretched, at a slightly different angle (7 degrees instead of 9 on the truck) and rounding the coordinates, it is not balanced.
It's rotation alternates left and right. You can use the mouse to give it a swing, but then it seems to gain rotating speed and makes everything shake. (Looks funny, but makes it drive bad)
F1/F2: legs
F3/F4:extend/retract chute
F5/F6: rotate chute
F7/F8: lower/raise chute
skstep.zip
view details
Gold
Silver
Bronze
