|
|
Browsing tag Mobile Cranes, found 73 matching files. (3 pages)
Download all 73 files: Mobile Cranes.zip (about 133.40 MB)
|
|
|
Liebherr LTM 1220-5.3
########################################
Version-2007
---------
Arms debuged
Engine power up
Brake power up
|
| |
|
|
 No Comments yet. Add some here.
|
|
|
Liebherr LTM 1220 Custom, Version 1.0
Abstract: a beefier mobile crane was needed to complete certain tasks, such as heavier loads than previously and more stability when transporting an attached heavy load. Ideas that spawned and were implemented include overhead tower elevator hydraulics instead of the boom underside elevator hydraulics that were weak under heavy loads, ties for the crane rotating base to the vehicle frame for less wobbliness under heavy loads and movement yet allowing disconnection so the crane base can rotate, wider wheels for potentially better traction and less wheel breakage when making a turn over curbs, higher total weight for physically better stability, and strategically located heavy load nodes once again for more stability. Intended for RoR v.0.34; use of specific mass load nodes are new to this version and important for optimum functionality of this crane.
;REVISION 0325.26.1.08 //Time (24 hrs).Day.Month.Year
;original by Pricorde, "Custom" package modifications by DSwan (TruckMax)
;Custom Trim by DSwan includes:
;Wider wheels, increased total weight, tuned dynamic weight distribution, crane base lockers, new boom elevators, new supplemental front wheels, modified engine & tranny (better range--ultra-slow creeper gears to cruising highway gears), other minor modifications
;Custom package effects:
;More stability during loading process and loaded movement, up to ~40 Tons can be lifted, in practically (vs. ~20 Tons w/original version), better traction under all circumstances, especially loaded
A Final Word: Thanks for a great mobile crane Pricorde! Expect version 2.0 by February 1 -- enhances may include wheels on the extending feet for awesome stability when transporting heavy loads, rear supplemental wheels like the front supp. wheels, wider stance, more crane structural reinforcement, custom rims, hydraulically adjustable counterbalances, and more! A revision, i.e. v.1.1 or so, may be released between now and then testing fuctionality of upcoming features and/or fixing problems with version 1.0. |
| |
|
|
|
No Comments yet. Add some here.
|
|
|
Liebherr LTM 1220 Custom, Version 1.1
Abstract: a beefier mobile crane was needed to complete certain tasks, such as heavier loads than previously and more stability when transporting an attached heavy load. Ideas that spawned and were implemented include overhead tower elevator hydraulics instead of the boom underside elevator hydraulics that were weak under heavy loads, ties for the crane rotating base to the vehicle frame for less wobbliness under heavy loads and movement yet allowing disconnection so the crane base can rotate, wider wheels for potentially better traction and less wheel breakage when making a turn over curbs, higher total weight for physically better stability, and strategically located heavy load nodes once again for more stability. Intended for RoR v.0.34; use of specific mass load nodes are new to this version and important for optimum functionality of this crane.
;REVISION 0235.28.1.08 //Time (24 hrs).Day.Month.Year
;original by Pricorde, "Custom" package modifications by DSwan (TruckMax)
;Custom Trim by DSwan includes:
;Wider wheels, increased total weight, tuned dynamic weight distribution, crane base lockers, new boom elevators, new supplemental front wheels, modified engine & tranny (better range--ultra-slow creeper gears to cruising highway gears), other minor modifications
;Custom package effects:
;More stability during loading process and loaded movement, up to ~45 Tons can be lifted effectively, in practically (vs. ~20 Tons w/original version), better traction under all circumstances, especially loaded. Version 1.1 removes the hydraulic feet and replaces them with wheels, which can be deployed while moving a heavy object. The vehicle is FAR more stable while moving a heavy load now; Version 1.1 is rated to effectively haul 30 tons up to 30 km/h @ < 15% grade. Before Version 1.1, the stats were 25 tons up to 25 km/h @ < 10% grade.
A Final Word (same note from Liebherr Custom v.1.0): Thanks for a great mobile crane Pricorde! Expect version 2.0 by February 1 -- enhances may include wheels on the extending feet for awesome stability when transporting heavy loads, rear supplemental wheels like the front supp. wheels, wider stance, more crane structural reinforcement, custom rims, hydraulically adjustable counterbalances, and more! A revision, i.e. v.1.1 or so, may be released between now and then testing functionality of upcoming features and/or fixing problems with version 1.0. |
| |
|
|
|
No Comments yet. Add some here.
|
|
|
A mini liebherr based off of a 3 axle liebherr crane. You can do wheelies.
HOW TO DO WHEELIES:
shift into reverse in automatic transmission, then punch the gas until you are going full speed in reverse,
then shift in first really quick and punch it! Its very fun. |
| |
|
|
|
No Comments yet. Add some here.
|
|
|
Project TATRA 815 CKD AD-28 is finally COMPLETE.
You can download it and have fun with this crane.
COMMAND for use:
F1 - F2 : rotation crane tower
F3 - F4 : lift arm
F5 - F6 : disengagement arm
F7 - F8 : spooling hook
ctrl + F1 - ctrl + F4 : disengagement/clutch shelf
ctrl + F5 - ctrl + F12 : dusebgagement/clutch shelf (up/down)
Before you start drive you must locked hook nose oof cabin, because it will cradle. For locked use button "L" and locked arm button "O".
B O N U S 3x craneload
[youtube=425,350]TVAJZntL3iU[/youtube]
|
| |
| Average Rating: |   | Tags: | Mobile Cranes |
Downloads today: 5, all time: 54613 |
|
|
7 Comments, add comments here.
|
|
|
well here is the next update. this version dosnt turn to well i modded it to be able to lift and move 130tonne i think it might be more. controls are displayed in the help section.
delete the old version isoloader.truck |
| |
|
|
|
No Comments yet. Add some here.
|
|
|
new and improved. this isoloader has been modded to suit the much anticipated release of the train!! now not only could you load trucks with containers, logs and other large item's but with this isoloader and the release of the train mod (hopefully not that long away, fingers crossed), you could build a empire and make, make Believe a reality. i know I'm tired of fake heavy loads what a boring box..... now there is light at the end of the tunnel, can you feel the vibrations.
delete the old isoloader.zip file before running game to stop crash's. |
| |
|
|
|
No Comments yet. Add some here.
|
|
|
This is my version of the a tatra flatbed. It has a crane on the back of it. The crane is not that big and strong so be careful. Yes this is my first crane. And my first big leap to becoming a
truck bulider. So I hope you like it!
CAUTION! Make sure you take the tatra flatbed out of your pack folder otherwise it will NOT work.
This file has no dependencies.
|
| |
|
|
|
No Comments yet. Add some here.
|
|
|
My first release: Liebherr LHM 280
commands:
F9-F10: Rotate front wheels
F11-F12: Rotate rear wheels
F1-F2 : Rotate crane
F3-F4 : Boom Up/Down
F5-F6: Hook Up/Down
F7-F8: Rotate hook
Ctrl+F9-F10: Stabilizer Open/Close
Ctrl+F11-F12: Stabilizer Up/Down
Press "O" to use ties and hook in 4 points (needed if you want to rotate the load)
or
Presss "L" to hook in 1 point
Note: to enter the crane, you need to be placed under the cab; and if the crane is on the stabilizer, you'll need to jump to enter. the cab is a little high 
discuss here
|
| |
| Average Rating: |  | Tags: | Mobile Cranes |
Downloads today: 6, all time: 41819 |
|
|
5 Comments, add comments here.
|
|
|
Flares for Gamer18's Demag AC500
This zip contains the truck files and Csxgp38-2's beacon (available on the repo).
Instructions:
1- Make a backup of your Gamer18's original zip file demagac500gamer18UID.zip
2- Take all the files from flares_for_demagac500gamer18.zip and put them into Gamer18's orginial zip file. This will overwrite the original truck files.
Usage :
Your keybind for headlights and turn signals
Warning lights = CTRL + 1
Worklights on the cab and rotator = CTRL + 2
Credits :
Gamer18 for the Demag AC500
Csxgp-38-2 for the beacon |
| |
|
|
|
4 Comments, add comments here.
|
|
|
This is a simple re-skin of the Sennebogen 5500
Yes i have got permission from Gamer18 to upload only the skin files.
to install
1. Unpack files to temporary location
2. Copy files into the Sennebogen 5500 .zip
3. Play
and no this mod does NOT turn you into a tank |
| |
|
|
|
No Comments yet. Add some here.
|
|
|
skin van een staalbedrijf !
bestanden uit de zip halen en in de map van de sennebogen zetten en vervangen !!
groet liebherr mk100 |
| |
|
|
|
One Comment, add comments here.
|
(updated on 30/6/11)
|
This is a re- skin for the Sennebogen 5500
Northern Crane
to install
1. Unpack files to temporary location
2. Copy files into the Sennebogen 5500 .zip
3. have fun! |
| |
|
|
|
No Comments yet. Add some here.
|
(updated on 1/7/11)
|
This is a new skin for the Sennebogen 5500
to install
1. Unpack files to temporary location
2. Copy files into the Sennebogen 5500 .zip
3. have fun! |
| |
|
|
|
No Comments yet. Add some here.
|
(updated on 1/7/11)
|
This is a !!NEW!! skin for the Sennebogen 5500
In the old skin was missing an "a" in Kra(a)nverhuur
to install
1. Unpack files to temporary location
2. Copy files into the Sennebogen 5500 .zip
3. have fun! |
| |
|
|
|
No Comments yet. Add some here.
|
(updated on 1/7/11)
|
Skin for the Sennebogen5500
Just the 3 files from the ZIP folder to replace the original files in the Sennebogen folder at the PACKS folder , and you've got a "H N Krane" Sennebogen 5500
Thank you for allowing us gamer18. |
| |
|
|
|
No Comments yet. Add some here.
|
(updated on 1/7/11)
|
This is a skin for the Sennebogen 5500
to install
1. Unpack files to temporary location
2. Copy files into the Sennebogen 5500 .zip
3. have fun! |
| |
|
|
|
No Comments yet. Add some here.
|
(updated on 1/7/11)
|
This is a new skin for the Sennebogen 5500
to install
1. Unpack files to temporary location
2. Copy files into the Sennebogen 5500 .zip
3. have fun! |
| |
|
|
|
One Comment, add comments here.
|
|
CRANE.rar
view details
Gold
Silver
Bronze
