This is something that I've been meaning to make for quite a while, a revamped version of my first scratch-made creation for RoR.
Working suspension parts
Working lights, courtesy of the materialflares system
Opening ramp (Ctrl+F3/F4)
Working jack, to make trucks of most heights haul this (Ctrl+F1/F2)
Lots o' ties to keep the most unruly load secure (ropables not included and must be present on the vehicle you are securing)
Plenty of room for even the biggest of your toys (10ft wide x 11ft tall, and 20ft long. It also comes in a 26ft long version)
DODGE charger (Me) - Everything
Off-Roader, Excisionized, and ShawnVallance - Beta Testing (A big thanks to them)
Added moving jack
Fixed gap issues with the ramp
Made a basic colors skinpack (Includes Black, White, and Blue skins)
Made an official Dura-Built skinpack
Increased stability of trailer (Doesn't shake as easily)
Destroy-able Road Construction Signs and Barricades
Signs and Barricades commonly found on North American Road Construction sites.
To Turn on the Flashers, enter the barricade with the drop down menu and hit the M key.
You are also able to reset the barricade/sign after destroying it, by entering the object, with the drop down menu, and hitting the "Backspace" Key.
Credits go to:
DarthCain - For the structure/meshes
Creak - For helping me with the Set_beam_defaults and the stability on the Three legged sign
LT. Smell My - for telling me about the "add Noise" tool which I used to do the .spec files
Type II Barricade
- One standard barricade
- One with Single Barricade Flasher
Type III Road Barricades
- 6' Double Sided Barricade
- 8" Double sided Barricade
- 10' Double Sided Barricade
- 8' Barricade, with two lights and Road Closed Sign
30" x 30" Diamond Road sign with Three leg Base
- Road Construction Ahead
Heres a new load for you all to have fun with
Its a big 2 ton (or it might be one ton) coffee cup.
Mesh was made by Skyhawk. I colored, resized, and made the node and beam structure.
Fully contactable with ropeable nodes on top and bottom.
I was searching the forums recently, and discovered that there were no ramps to jump cars off of, so I decided to create one. This is a car-sized "Kicker" ramp based off of those that are used for skateboarding. It has a tow hitch so you can drag it around with trucks, so moving it is possible. It only weights 150 Kg, so most vehicles can tow it. As a side note, this is my very first mod for any game.
+Add more types of ramps, especially tilted ramps and sliced quarter pipe ramps.
+ Added New Twisted Ramp 'RoR Ramp "Twisted Kicker" - Plastic'
+ Added New Twisted Ramp 'RoR Ramp "Twisted Kicker" - Full Metal'
+ Renamed Original Ramp to 'RoR Ramp "Kicker" - Plastic'
+ Added New All Metal Ramp: 'RoR Ramp "Kicker" - Full Metal'
+ Full Metal ramp weighs more than Plastic ramp.
+ Plastic ramp is still compatible with people that still have V1
+ Fixed some errors.
[Moved Props section below nodes]
Everything was created by me.
To Modders of Mods:
I know who I personally have given permission to mod this, so don't mod without permission.
Link to Discussion: RoR-Ramp (More Frequent Updates)
Heavy vehicles or vehicles with large tires risk causing the ramps to slide. The ramps were designed for lighter vehicles and are physically designed to be light so they can be towed by normal vehicles such as SUVs or Pickup Trucks (Including the S10).
All content is for use in Rigs of Rods only. Read the copyright file included in the zip!
This is a small map I built for my erectable wind engine.
- Contains all parts of my fully transportable and erectable wind engine. See included manual for button assignments
- A winding road to transport the windmill pieces
- A small train track with tunnels
- Nice looking textures and vegetation (Thanks for all your help DeGa!)
This is the trailer I started a ways back its not done but I am not continuing with it because I am working on something else. I also lost the original unwrap so I have to redo that and really don't wanna redo that. So I figured I would share at least what I have done if some whats to fix/mod what ever do so freely.
Only author is me.
Known problems-handle mesh twitch's, suspension is really stiff, ties are to tight
Here's an odd load, a computer! I thought of this one day while I was looking on the repository for loads. It's not too bad on fps, but it's not great. I may work on this more, but I'm not sure about it.
Enjoy a flexbody computer to smash in Rigs of Rods.
Do you want a modifiable version so you can make any computer you want? If so, please respond using the discussion link below.
This is a mobile home or mobile office depends on how you use it. You can pull it to your location and pull the tires into the body and it will be on the ground like a house. It is a decent amount of weight 22046.23lbs. It is fun to pull around comments are greatly welcomed. This is a 10x40 trailer its not a CAMPER.
made by me
Update 1. made the tongue longer fixed the tires problems added more weight
Submarine Deep Sea 9 - or DS9
For Science and Research..
divedepth: all the way down to 30 meters and beyond..
- crane arm to salvage crates, cars and other stuff.. - I lifted 1.7 tons with it.. probbably goes more..
- cockpit with 4 windows to see, what is around under the water..
- trailer-interface - is needed to load it on a trailer for land transport
- some nodes to lift it with a crane - you need something like Demag ZKKE
the zip contains:
- submarine DS9
- 3 FPS versions with reduced quality or even removed some cameras - made a lot difference..
This is a mod to box5's goose neck. I made it shorter and made it have two axles. The mod was simply to make it look better when hauling stuff around. In my opinion the normal one is a little large.
Original trailer is box5s
Mod by me
And i know the mod isn't perfect. May over write the old one.
Original file http://www.rigsofrods.com/repository/view/585#comments
Today, me and Brickman bring you a generator load, the RORGEN GX70000. It is simply a mesh placed on a n/b chassis.
-Engine, for realism.
-Ropables, so you can pick it up with a crane.
-Contactable, so you can place it in a truck bed or on a trailer.
-Exhaust, for realism.
-It also features a large wheel on the inside (viewable by pressing the "K" key), which spins faster as the engine RPM increases .
We are hoping to release updates and/or new models under the RORGEN name, so stay tuned!
Me (ROR-EMS): Mesh, idea
Brickman: All N/B work, Engine, Mesh help.
Feedback is always welcome!
Note: If you want to use the n/b, mesh, or any components of this project in a mod of your own, please request permission from me first, and I will either grant/decline you permission for the parts of this project I am responsible for, or I will forward you to Brickman, for the parts he is responsible for.