This is the dumper-version of my Mercedes Kurzhauber. Everything is made by me. Its ropable, so you could also carry it.
Its a bad frameeater, but you can deactivate the mirrors and the mesh-wheels if you ve poor framerates.
Its not already done, but for the moment its some nice stuff i think.
you can connect trailers to the front- and the back-hook
You can lower and lift the supports with F1/F2
You can lower and lift the Dumper with F3/F4
As long as you give me credits, you re allowed do verything you like to and that makes the trucks better.
Using parts of my trucks for your own project surely also allowed, only let the people know who has done the originals.
It was nice to get an PM if you plan to publish it on other sites than these.
Also, you can do whatever you want with it, take parts, repaint, change rims, I don't care, just give credits if you are going to release something using these parts.
YOU MUST HAVE AT LEAST 0.38.33 TO USE THIS CAR. THIS CAR WILL NOT WORK WITH AN OLDER VERSION.
Updated with modeled panel gaps! Fixed UV mapping on Army version!
1949 Ford by Gabester
The 1949 'Shoebox' Ford was the first all-new design to come out of Ford after the war, featuring a stylish aerodynamic body shape and sophisticated independent front suspension.
Features:
Realistic performance
Detailed flexbody
Full interior
Collidable submesh
Custom sounds
Separate detaching parts (hood, fenders, doors, trunk, headlights, and bumpers)
Five versions (Club Coupe, Moonshine Special, Tudor, Fordor, and Indiana Jones US Army)
Flextires
DO NOT modify this without my permission.
You need a fast computer to handle this car. Requires .38.33.
Do not edit the MESH in any way shape or form without my permission. If you want to use
the n/b all I ask is that you PLEASE consult with me first. Public or private. You are free
to make custom colors, change the motor, wheels, etc. But do not edit the verts on anything
here in this zip.
Credits:
darn_it: Main 440 engine and U-joints
eclipse/faustknight: Rear Dana 60
Tenderpaws: Transmission
ADR's Carmageddon 2 cars: Some textures
Mythbuster: Support, a lot of testing, and being there for rebounding ideas.
Jaw-4: Testing, support, and being someone to talk to.
PRT-Audiman: Sound and tuning help
Skyhawk: Mini's
Jaimswallace: Awesome teaser video
Dkutch: Everything else.
YOU MUST HAVE AT LEAST RIGS OF RODS 0.38.33 TO USE THIS CAR. THIS CAR WILL NOT WORK IN AN OLDER VERSION OF ROR.
Updated with improved suspension, handling, and crashing behavior! The exterior camera is also now correctly centered on the car.
Gavril Zeta by Gabester
This is a compact SUV.
Six versions:
2WD
SWB
LWB
Crawler
X
R
Features:
Realistic performance
Detailed flexbody
Separate detaching parts (hood, doors, trunk, fenders, mirrors, and bumpers)
Collidable submesh
Full interior
Stable on-road handling
Excellent off-road capability (except for the R and 2WD)
Flextires
ABS and traction control
Meshwheels2 for sharper handling
Please DO NOT modify this without my permission. Thanks.
This is a 1976 Ford W-9000 cab-over-engine semi tractor. A fairly basic node-beam vehicle that will get the job done. All of the pieces for this were created by me (M-138) except the mirrors. Feel free to modify, just remember to give credit.
YOU MUST HAVE AT LEAST RIGS OF RODS 0.38.33 TO USE THIS CAR. THIS CAR WILL NOT WORK WITH AN OLDER VERSION OF ROR.
Gavril Omega by Gabester Now with meshwheels2, ABS, and traction control, as well as other minor fixes and improvements!
The Omega is an off-road sports sedan. Choose from three versions:
Omega Six - ~300 horsepower I6 diesel base model
Omega Ten - ~500 horsepower V10 with bigger wheels and lifted suspension
Omega Twelve - 600+ horsepower V12 with a lightened chassis, stiffened lowered suspension, and street tires
Features:
Realistic performance
Detailed flexbody
Separate detaching parts (hood, doors, trunk, fenders, mirrors, and bumpers)
Collidable submesh
Full interior
Stable on-road handling
Excellent off-road capability (except for the Twelve)
Four wheel drive on all models
Flextires
Here it finally is! The Bombardier ALP-45DP dual powered locomotive.
It comes in two different liveries, AMT (Canada) and NJT (USA).
Both a version of the locomotive in diesel and in electric mode is available, only difference are the sounds and the removed exhausts on electric version.
Please carefully read the instructions BEFORE posting useless questions:
Spawning:
Use the train spawner placed on the map (small building where it says "Trains") or place it on a straight track piece via the .terrn file, DO NOT spawn in the truck spawner this will not work.
Controls:
The ALP uses default truck controls. Always stay in automatic-transmission, it will not shift in the second gear!
F5/F6: to rais or lower the pantograph.
CTRL + 1: change directional lighting
CTRL + 2: front ditch lights
CTRL + 3: front lights
CTRL + 4: rear ditch lights
CTRL + 5: rear lights
CTRL + 6: wipers
(Un)Coupling:
The knouckle couplers couples other trains (using the same coupler, of course...) like other ALP's automatically. When coupled, both carriages are connected to each other ingame. If you want to uncouple two carriages, you need to unlock couplers on BOTH carriages in between you want to uncouple. The ALP has a small lever next to the rear knuckle coupler (with a lock/unlock-sign next to it) that can be grabbed by mouse. Pull to "unlock" position on both carriages and done. Not that complicated.
Thanks to:
sputnik_1 - Without him this would not have been possible. He made trains actually work in Rigs of Rods (as you will see after reading this and testing the locomotive), outgoing from donoteats basic layout design. Furthermore he helped a lot with tweaking the ALP, to make it drive as good as it does. Many many thanks mate!
donoteat - He once had the idea to bring trains to RoR and made the great layout we are now using.
And thanks to the inveted members who tested this!
Update:
Added ropables so it can now be lifted with a crane.
Errors:
Game might crash when you want to couple two ALP's, to avoid this disable high quality refelctive effeckts!
This pack is my attempt to capture the Streamline Moderne style popular in the 1930s and 1940s. The vehicles are all fictional, but their performance is realistic. I hope you'll enjoy driving them as much as I have enjoyed making them.
1948 Martin T64S "Custom" Tractor
A very low-slung 6x4 tractor. It has independent front suspension with double wishbones and load sharing rear suspension. The engine is a naturally aspirated 12-cylinder diesel driving through a 7-speed gearbox and locking differentials. Overall length is 29 ft, wheelbase 22 ft from front axle to centre of rear axle group, width 102 in, height 14 ft 9 in to tip of smokestacks. Kerb weight is 20,000 lbs, gross combination weight 80,000 lbs.
Fully loaded, the T64S will reach a top speed of 60 MPH with one of the included trailers. It will accelerate from 0-50 MPH in 1 minute, 0-60 MPH taking approximately 2 minutes.
1948 Martin O40 Tanker
A streamlined tank trailer in fictional "Hexaco" livery. Steel unibody, load sharing suspension. Overall length is 40 ft, wheelbase 28 ft from kingpin to axle group centre, width 102 in, height 10 ft 6 in. Loaded weight is 60,000 lbs.
1948 Martin F45 Flatbed
A simple flatbed trailer with stainless steel load deck and load sharing suspension. The deck is submeshed with the rollon flag and has ties to secure loads. Overall length is 45 ft, wheelbase 36 ft from kingpin to axle group centre, width 102 in, deck height 59 in, overall height 79 in to top of bulkhead. Kerb weight is 12,500 lbs, rated load 47,500 lbs.
1948 Martin V59 "Streamliner" Dry Van
A very large and somewhat impractical dry van. It has a streamlined stainless steel unibody and load sharing suspension. Overall length is 59 ft, wheelbase 47 ft from kingpin to axle group centre, width 102 in, height 14 ft 9 in. Loaded weight is 60,000 lbs.
Notes
These have only been tested in Rigs of Rods version 0.38.67.
The wheels have 40 nodes each, and the meshes were made in Sketchup. Don't expect these to be FPS-friendly.
The trailers are roll coupled via the system used by Lenni and Badboy for trailer steering. The centre of gravity and suspension are tuned accordingly; the trailers may topple easily on trucks that lack these nodes.
To minimise rolling resistance, the wheels are pushing the limits of the beam engine. They tend to oscillate when stationary. Caution is advised when stopping or parking on slopes as they may creep.
The trailers have very low drag. The T64S will not pull most other trailers at high speed.
Licence
CGTextures does not allow redistribution of its textures under open source licences. You must remove/replace their texture before releasing modifications of this truck. All other assets used are available for modding. See the readme for specific file information and licensing details.
v1.2, see changelog
Here is a 1st Generation Bluebird Vision for under your tree! (or in your mods directory...)
Info:
The 1st Generation Vision was a type C bus made by BlueBird from 2003 – 2007.
Features:
-Animated props (including openable e-door and roof hatches)
-Changeable seat and floor color textures*
-ABS, slopebrake
-District name on the side of the bus
-Selectable 8-way types (dropdown in the spawn menu)
Gripes:
-The body appears shaky on the inside at high speeds (since it's not a flexbody it shakes rather than flexes)
Changelog:
-Fixed the left veer
-Added reflection in driver mirror
This should be the final final version!
*You can download different seat/floor textures here: Brown Black Green Red Blue Here is the PSD for the district name, making editing it with the same font easy.
Credits:
Brickman & Dereksh97: Original free-to-use-with-credit bus n/b
SBF- critiquing and suggestions
Khadner- CAT C7 sounds
ROR-EMS- CM300 Radio mesh
Carsonj493- BlueBird Vision 3D model
graysonk95- Making the bus!
PM me with any questions or comments. No mods, however, you may distribute customized textures, no permission needed.
Enjoy!
Hey, This is a Undercover Police mod for the Box5 Dodge Ram.
If you have my 1st Version, Please Delete! Thank You
What Does it have?
-Flares CTRL+1/CTRL+2
-Sirens
-ABS/TCS/Slope Brake
-As Some Props
-Differentials Locked/Open
BIG UPDATE!!!
-Now are Gray
-Renamed Vehicle to "Dodge Ram 12v Undercover"/"Dodge Ram EXT. 12 Undercover"
-Fixed Description
-You Dont need to delete Original Ram
Credits/Permission
DODGE charger (Props)
HEMI (Props)
Box5 (Release)
tman 434 (Fixing the original skin as flares)
0429matthew (flares)
LGxDevil (Placing Props,Siren, TCS/ABS/Slope Brake, As other stuff)
Trailer P-32 is designed for quick transport wheeled and tracked vehicles and other material to the weight of 40 tons. In an emergency, up to 46 tons, maximum speed may be 10 km / h Is designed for off-set with tractor on roads I to III. class, the roads are paved and after tolerable terrain without external imbalances and obstacles.
Technical and tactical data
Dimensions:
- Total length (including shaft): 9475 mm
- Overall height: 1420 mm
- Height of the loading area: 1000 mm
- Overall width: 3100 mm
- Wheelbase: 4410 mm + 1000 mm
Loading area:
- Length: 4900 mm
- Width: 3100 mm
weights:
- Standby: 10,600 kg
- Payload: 40,000 kg
This is a FINALLY released pack of tow vehicles COMPLETELY made by Thatsnice. I recieved this file with the request of doing flares and easing up on the FPS Drop.
Authors: Thatsnice (Node/Beam, Meshes), PArescueEMT (Flares and mesh editing)
I am releasing this with permission from TN as this seems to be a sought after mod.
UNIMOG 406
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
Disclaimer:
-mods for personal use ok, but don't ask to release your super engine power lift kit mod, or to use the rims/tires on your vehicle to showoff, it ain't gonna happen, yo.
Brand and type: Mercedes Benz Atego Sleepwagen ANWB
Ingame name: MB Atego ANWB
Tested in: 0.38.57
This is an Standalone file!
I got permission from Lenni to release this back in April 2011, so I thought this would make a nice addition to the repo.
The ANWB is a dutch company that does most of the towing work in Holland. They basicly control the Roadside assistance branch.
The word ANWB stands for Algemene Nederlandse Wieler Bond.
New
Added some copyright file to the zip, since someone found it necessary to use my mesh without permission for another game.....
This is the Liebherr LTC 1045-3.1. It's a small compact crane which can lift 45t at close range.
The crane is fully skinable and you can download the PDN files here You are allowed to release new skins onto the repo but please make it a .skinzip!
Be sure you got an up to date RoR version
Credits:
- Lenni for mapping the whole crane and his tons of work on finishing this project!(Mirrors, flares and N/B fixes!)
- AIN_002 for editing meshes and bug fixes on the N/B
Controlls:
You can also find the controls by the T-screen. (just press T in-game)
Mesh of the uppercabin is made by Craneman
Other mesh parts are made by me
N/B axles are made by Craneman
what you get is:
Terex-Demag ac500 with ssl
Terex-Demag ac500 without ssl
Terex-Demag ac500 with 18m fixed jib
Terex-Demag ac500 with 30m fixed jib
Terex-Demag ac500 with 36m luffing jib
Terex-Demag ac500 with 60m luffing jib
Terex-Demag ac500 with 90m luffing jib
controls:
f1 or f2 = turn left or right
f3 or f4 = boom up/down
f5 or f6 = hook up/down
f7 or f8 = cab up/down
f9 or f10=counterweight systeem up/down press K too see it
f11 or f12=jib up/down
ctrl+f1 or ctrl+f2=boom1 in/out
ctrl+f3 or ctrl+f4=boom2 in/out
ctrl+f5 or ctrl+f6=boom3 in/out
ctrl+f7 or ctrl+f8=boom4 in/out
alt+f1 or alt+f2 = suspension up/down
alt+f5 or alt+f6 = outriggers turn
alt+f7 or alt+f8 = outriggers in/out
alt+f9 or alt+f10 = outriggers up/down
alt+f11 or alt+f12=cab turn
ctrl+alt+f1 or ctrl+alt+f2 = axle 5 lift
ctrl+alt+f3 or ctrl+alt+f4 = ssl up/down
ctrl+alt+f5 or ctrl+alt+f6 = ssl sidemoving
ctrl+alt+f7 or ctrl+alt+f8 = ssl ropes ssl till boomhead
ctrl+alt+f9 or ctrl+alt+f10 =couterweight boom up down only by versions needed with luffing jib
ctrl+alt+f11 or ctl+alt+f12=crab steer
i hope i have write all commands
look at the first post of ac500 topic for pictures how the counterweight systeem work (demag-ac500)
Features
- Detailed meshes
- Accurate kinematics
- Realistic lifting capacity (refer to the board on the crane!)
Instructions
Start the engine and put the Crane in NEUTRAL!
- F1/F2: Rotate
- F3/F4: Trolley (use throttle to speed up if needed)
- F5/F6: Hook Up/Down (use throttle to speed up if needed)
- F7/F8: Extend/Retract Jib
- F9/F10: Raised-jib working angle
- Ctrl+F1/F2: Assemble/Disassemble
- Ctrl+F3/F4: Outriggers
- Ctrl+F5/F6: Legs
- Ctrl+F7/F8: Trailer wheel up/down
- Ctrl+F9/F10: Turn trailer wheel
- And as usual lock loads with "o"
You can also see the commands by pressing "T" ingame.
Basical procedure: Ctrl+F4 to fold outriggers; Ctrl+F6 once for legs, Ctrl+1 [NOT F1!] to display the baseplates, Ctrl+F6 again for legs. Then Ctrl+F2 to erect the crane automatically. Jib control is on F7/F8. Jib angle is on F9/F10. Retract automatically on Ctrl+F1.
Credits:
- sputnik_1: meshes, node and beam, sounds, textures
- BigBoy, Craneman, Lifter, Inviteds, Donators: testing and help, thanks a lot!
added the following
5th wheel version with ball mesh courtesy of Diesel Smoke
light bar with working flares on all versions. CTRL-1 for flashing lights on light bar.
beacon on each version
light bar is from the repo thanks to dodge0359a
improved power,braking and hauling abilities.
Functions
All functions work by press once functionality, also winches, so when you press the extend button once, the winch will keep extending, until you press again.
F5-F6 Front Winch
F7-F8 Rear Winch
F9-F10 Doors
F11-F12 Drop sides
W Diff Lockers (Open, Rear Locked, Both Locked)
N Driving lights
Credits:
3D models, textures, N/B, truck -file and custom sounds are
by Masa
A shader script and a material script are by Box5Diesel.
Core beta testers and useful help: Braskus, Gabester, and many other forum members.
Thanks to all beta testers and to everyone else who helped me at the
forums.
These are two of my favorite trucks, 1975 Chevrolet Titan 90 and GMC Astro 95.
The Astro 95 and the Titan 90 both have a Detroit 8v-71 318.
updated again with Sounds, The Titan is now longer in the GN Empire Builder Scheme
She's painted like my Titan model. Big Sky Blue and White with Black and gold stripes.
Now Without Visor, And Detroit 318 Straight pipe Sound Added.
Credits
Model - dneufeld
Wheels - Hemiboy
Adding the wheels - DougFunnie
Skins and tuning - MADDRIX
Sounds - MADDRIX - NRS91
I present to you, the 1915 Ford Model T. This holds the name of the oldest real car ever to be put into RoR. This is the Original "Go everywhere, anywhere" car.
There are 6 versions. There is a Pickup truck (2WD and 4WD), a Sedan, a Coupe, a Touring, and a Junker version.
The gear ratios/axle ratios/wheel size/engine power/top speed are all real specifications. The top speed is a physically limited 40 MPH on the dot for all versions except the power-degraded Junker. The Junker's top speed is closer to 30. All versions except the Junker have 21 Horsepower. Junker has around 18.
You cannot drive this car in Automatic Transmission mode, as the gap between 2nd and 3rd, then 3rd and 4th are too large for the game to gearshift between them correctly. Thus, you must drive in Manual or Fully Sequential gearbox mode to get up to cruising speed.
These vehicles are not flexbody, and each on average have between 10K and 20K polys total including all 4 wheels. Honk the horn for a sound only '10s - '30s Fords can produce. Aoooga! Sometimes when you turn, it heavily understeers because the front axle is not very strong, so be careful.
Custom sounds are thanks to DODGE charger (thank you!)
All meshes and N/Bs are thanks to myself, Sirendude2011.
Do not mod this vehicle. Treat this like you would a real Model T 100 years of age. Would you (attempt) to hellaflush a Model T? No, so don't do it. Same goes for hydraulics and lifts with mud tires. It is impossible to skin it with anything except solid colors (no designs), so don't try.
Enjoy this historic vehicle! The driving experience is like no other vehicle in RoR history, believe me.
This is the final and last version of Nissan 350Z for Rigs of Rods.
Even if the original submesh model of this car is more than 2 years old its still a headturner!
Since then I edited the nearly everyday to make it look, sound and feel like its real counterpart.
Here are the most important notes:
- the body and suspension is a RoR classic setup made out of a nodes, beams and a submesh
- the engine is tuned to behave like the original one
- the transmission should be shifted manually and has real gear ratios
- the car can easely go to 250 km/h
- the suspension is set up for both drifting and highspeed stability
- the sounds are carefully collected and mixed so can get that good V6 sound in your ear
- i havnt include a tire sound. it got annoying after a while
- there is also a roadster/ convertible version in the file
- and many more things...
I havnt a specific forum tread for this car. If you have questions or want to mod the please PM me.
This is my selfmade Mercedes "Kurzhauber". It has good offroad capabilitis for a truck of this kind. Suspension and Engine are in a medium setup, so i hope everyone can have fun with this. There are Mirrors and Meshwheels prepared in the truckfile, simply activate them, if your machine has enough gfx power. There will follow more different versions of this truck.
updated version - some bugfixes
added 2 trailers, semi and turnaxle trailer.
did some mesh-updates....
Big thanks to Dodge Charger, Murkas and Auke1 for their help.
Well here it is. The official release of my not-so-official FJ cruiser.
I worked nonstop on this car for a year and a half, and gave up about 6 months ago due to just loss of interest.
I had been talking to some friends recently on the forum who said they would really like to see it tidied up
and released. I dont exactly have some long drawn out story about how it got to where it is. It was really just
a huge learning experience. but finally decided to let it go because I lost all of the original files to the mesh.
I suck at writing. So heres a list. :|
Everything-me.
pictures to the left- taken an edited by my main man, Ferrettank!
Known problems are as follows:
Missing quite a few meshes. (Mainly suspension pieces)
Interior is incomplete.
No damage.
And there is a material bug with it on Deags Trail Island map. For whatever reason, the tires are yellow. I cant figure it out...
This was my first try at animated props, flex tires, and flares, so it is what it is! Hope you enjoy it.
Also, modding, do as you wish, post pics as you wish. I dont really care. But if you'd like to release any of your mods (and credit me ;D), please ask my permission first.
This is The F-150 Raptor SVT from Ford.
Has leaf springs at the rear with some really nice travel. on the front double A arms for each wheel with fair amount of travel.
real fun to cruise. has tow hitch for towing thingies.
Not much of exciting look since it is only N/B chassis but i find those kind of trucks most pleasing.
HAVE FUN.
THIS HAS BEEN UPDATED:
FIXES:
THE 01 ON THE SIDE
THE RANDOM BLACK LINES.
This is the old General Lee from the Dukes of Hazard. The original Dodge Charger was by bonehead and I gave it a new paint job (skin) and then modded the engine and gearbox to make it more like the original General from the program. Hope you like it.
Credits:
Dodge Charger (.truck file): bonehead (kudos to him)
Skin and Engine: Me (FlyingGuru)
Included in the pack is:
- Manitou telehandler with coupling for attachment
- Manitou telehandler with truss boom
- Manitou telehandler with winch
- Bucket attachment
- Forklift attachment
- Counterweight loads
Version 1.2
- Skin selection menu removed (download skin pack instead - see forum link)
- New torque curve
- Flares added
- Working lights/beacon added (Ctrl-1)
- New Manitou winch version
- 2 Counterweight loads
2008 KME Predator fire engine, based on the fire engine from Butler NJ.
Features:
- Openable doors and windows
- Tilting cab
- Animated props; driveshafts, light switches, pedals, dashboard needles...
- Can simulate engine torque twisting force (RoR first)
- Comes in 2 versions; caterpillar and detroit, both equiped with allison 5 speed auto transmission
- 22 commands (F1 to Ctrl+F12)
- 9 custom lights (Ctrl+1 to 9)
v1.2
Fixed:
-Default light bar flares showing on the roof when "M" was pressed
-Broken turn signal
-Mirrors are back again
-Meshwheel2
-Added Eminox's engine/gear ratio & driving aids
-Now accept .skinzip files
-Detroit and Caterpillar version are combined into the same .truck file, use the in-game menu to make your choice.
Starling 911, this is Starling Engine 1 responding. Yes ladies and gentlemen, I this is my first upload, and I have made a skin for the KME Preditor by Cydvx and Pascal. With Cydvx's permission I am releasing it. Now mind you this is a Standalone skin, Instructions are in the zipfile. they should help you.
Credit: Cydvx and Pascal for the original KME and Blank skin [read more]
This is a ford f350 dually with a 7.3powerstroke turbo diesel it will do all your hauling and is great offroad.
authors box5 diesel for the truck me for the mod and RORCAT for the sounds
It is meshed, and much higher quality. Credits:
Pricorde - Original bus
Derbymutt - Revival, meshes, re-texturing, n/b fixes and changes, shader stuff
Fradias - Wheels & Tires
Modding Policy:
Modding and releasing any content for this bus on a mod of it or on another vehicle is permitted and encouraged as long as due credit is given.
Basically, Mod away and give credit.
Info:
It is fully skinnable, if you do not like the plastic paneling on the bus, just comment out agora_fb.mesh and agora_rear_lights.mesh from the flexbody section as well as the forset line below them.
It is also deform-able and flexbody.
I have also used flexbodies for the tires, so that they work in multiplayer and still are deform-able and separate from the rim mesh.
Hi there, this a 1984 Kenworth SAR designed and built only in Australia. It has a big 'n' burly Cummins inline 6, backed by an Eaton Fuller transmission with 12 forward gears to get the power where it's needed.
If you have the old version make sure to delete it from your packs folder
NOTE: This is an extensively modified version of Box5diesel's W900. I give massive thanks to him for the original truck and for allowing me to modify it.
There are several different trucks in the pack, however, to save space they all share the same mesh so you can only spawn one of each type at a time, otherwise the materials will collide.
I included the photoshop file in the pack as well, so it easier to make custom skins.
If you find any problems feel free to send me a private message.
Melroe M-880 Prime Mover
This is a prime mover for real heavy loads build out of a former wheeled skid-steer dozer. Like the real thing it does not have any suspension but a lot of power ;-) .
My RoR model features some animated parts like the cooling fans and levers inside the cab as well as some custom sounds.
Mesh and N/B all by me, please do not upload any mods without my permission, thanks :-) .
Terrain description:
This is a desert island, it has no roads but tracks are marked with washed-up logs. There is a few very small settlements dotted around the island.
You start on a peninsula in the midde of the bay and drive across the sunken bridges to get to the island.
You'll need a decent offroad car as there's a section where the track dips underwater, and quite a few large mounds in the roads (where I didn't quite do the heightmap right lol)
Credits:
LJFHutch: Every single non-default object in the terrain (most of the objects I have taken from his Greece map).
PsychoDog: The actual terrain.
F1 Terrain Creator: V1.2 uses trees from the F1 Test Track.
Enjoy.
V1.2
Some fixes and improvements to the island. For the full list of all the edits read the readme. The main edits I've made is to the sunken bridges on the penninsula (I've got rid of the log section since that caused some problems when you drove over it) and added a couple more tracks and buildings. Also added some crops to the farmers field so it's not just green ground any more.
Never released Versions 1.1 - 1.19 because I didn't think there was a big enough change to justify a reupload, so this is the first update. Please tell me if I've screwed anything up that was correct in V1 and I'll fix it.
This works best with 0.38.67. If you use 0.39 there may be some extra bugs (e.g. I had a lot of collision problems when I tested with anything newer than 0.38.67) and things may not look quite right. No fixes are planned for obvious reasons (0.4 is going to be the next release, not 0.39).
*PLEASE DELETE THE OLD ZIP (Zyk.zip) BEFORE YOU DOWNLOAD THIS ONE!*
10bb3UID-rundhauber-dumper.zip
view details
Gold
Silver
Bronze
