Project TATRA 815 CKD AD-28 is finally COMPLETE.
You can download it and have fun with this crane.
COMMAND for use:
F1 - F2 : rotation crane tower
F3 - F4 : lift arm
F5 - F6 : disengagement arm
F7 - F8 : spooling hook
ctrl + F1 - ctrl + F4 : disengagement/clutch shelf
ctrl + F5 - ctrl + F12 : dusebgagement/clutch shelf (up/down)
Before you start drive you must locked hook nose oof cabin, because it will cradle. For locked use button "L" and locked arm button "O".
Mesh of the uppercabin is made by Craneman
Other mesh parts are made by me
N/B axles are made by Craneman
what you get is:
Terex-Demag ac500 with ssl
Terex-Demag ac500 without ssl
Terex-Demag ac500 with 18m fixed jib
Terex-Demag ac500 with 30m fixed jib
Terex-Demag ac500 with 36m luffing jib
Terex-Demag ac500 with 60m luffing jib
Terex-Demag ac500 with 90m luffing jib
controls:
f1 or f2 = turn left or right
f3 or f4 = boom up/down
f5 or f6 = hook up/down
f7 or f8 = cab up/down
f9 or f10=counterweight systeem up/down press K too see it
f11 or f12=jib up/down
ctrl+f1 or ctrl+f2=boom1 in/out
ctrl+f3 or ctrl+f4=boom2 in/out
ctrl+f5 or ctrl+f6=boom3 in/out
ctrl+f7 or ctrl+f8=boom4 in/out
alt+f1 or alt+f2 = suspension up/down
alt+f5 or alt+f6 = outriggers turn
alt+f7 or alt+f8 = outriggers in/out
alt+f9 or alt+f10 = outriggers up/down
alt+f11 or alt+f12=cab turn
ctrl+alt+f1 or ctrl+alt+f2 = axle 5 lift
ctrl+alt+f3 or ctrl+alt+f4 = ssl up/down
ctrl+alt+f5 or ctrl+alt+f6 = ssl sidemoving
ctrl+alt+f7 or ctrl+alt+f8 = ssl ropes ssl till boomhead
ctrl+alt+f9 or ctrl+alt+f10 =couterweight boom up down only by versions needed with luffing jib
ctrl+alt+f11 or ctl+alt+f12=crab steer
i hope i have write all commands
look at the first post of ac500 topic for pictures how the counterweight systeem work (demag-ac500)
Press "O" to use ties and hook in 4 points (needed if you want to rotate the load)
or
Presss "L" to hook in 1 point
Note: to enter the crane, you need to be placed under the cab; and if the crane is on the stabilizer, you'll need to jump to enter. the cab is a little high
New
Added some copyright file to the zip, since someone found it necessary to use my mesh without permission for another game.....
This is the Liebherr LTC 1045-3.1. It's a small compact crane which can lift 45t at close range.
The crane is fully skinable and you can download the PDN files here You are allowed to release new skins onto the repo but please make it a .skinzip!
Be sure you got an up to date RoR version
Credits:
- Lenni for mapping the whole crane and his tons of work on finishing this project!(Mirrors, flares and N/B fixes!)
- AIN_002 for editing meshes and bug fixes on the N/B
Controlls:
You can also find the controls by the T-screen. (just press T in-game)
This is an skin for Lenni's Man TGS 32.350 LTF 1060 Crane Truck.
I've skinned it to an "Feuerwehr Kran" With the marking 'KW-065'
This is an fictional skin loosely based off real german fire apparatus. [read more]
with 24,3m mainboom
with 35,5m mainboom
with 46,7m mainboom
with 57,9m mainboom
with 69,1m mainboom
with 24,3m mainboom and 24,3m jib
with 24,3m mainboom and 35,5m jib
with 24,3m mainboom and 46,7m jib
with 35,5m mainboom and 24,3m jib
with 35,5m mainboom and 35,5m jib
with 35,5m mainboom and 46,7m jib
with 46,7m mainboom and 47,7m jib
the commands are:
f1 and f2 for turn around
f3 and f4 for boom up/down
f5 and f6 for hook up/down
f7 and f8 for jib up_down
f9 and f10 for left track moving
f11 and f12 for right track moving
alt+f1 and f2 for cablift up/down
alt+f3 and f4 for cab up/down
credits or help:
lenni for helping with the tracks
cranedriver for some mesh parts
gamer18 for n/b and mesh
This is my version of the a tatra flatbed. It has a crane on the back of it. The crane is not that big and strong so be careful. Yes this is my first crane. And my first big leap to becoming a
truck bulider. So I hope you like it!
CAUTION! Make sure you take the tatra flatbed out of your pack folder otherwise it will NOT work.
new and improved. this isoloader has been modded to suit the much anticipated release of the train!! now not only could you load trucks with containers, logs and other large item's but with this isoloader and the release of the train mod (hopefully not that long away, fingers crossed), you could build a empire and make, make Believe a reality. i know I'm tired of fake heavy loads what a boring box..... now there is light at the end of the tunnel, can you feel the vibrations.
delete the old isoloader.zip file before running game to stop crash's.
Liebherr LTM 1220 Custom, Version 1.1
Abstract: a beefier mobile crane was needed to complete certain tasks, such as heavier loads than previously and more stability when transporting an attached heavy load. Ideas that spawned and were implemented include overhead tower elevator hydraulics instead of the boom underside elevator hydraulics that were weak under heavy loads, ties for the crane rotating base to the vehicle frame for less wobbliness under heavy loads and movement yet allowing disconnection so the crane base can rotate, wider wheels for potentially better traction and less wheel breakage when making a turn over curbs, higher total weight for physically better stability, and strategically located heavy load nodes once again for more stability. Intended for RoR v.0.34; use of specific mass load nodes are new to this version and important for optimum functionality of this crane.
;REVISION 0235.28.1.08 //Time (24 hrs).Day.Month.Year
;original by Pricorde, "Custom" package modifications by DSwan (TruckMax)
;Custom Trim by DSwan includes:
;Wider wheels, increased total weight, tuned dynamic weight distribution, crane base lockers, new boom elevators, new supplemental front wheels, modified engine & tranny (better range--ultra-slow creeper gears to cruising highway gears), other minor modifications
;Custom package effects:
;More stability during loading process and loaded movement, up to ~45 Tons can be lifted effectively, in practically (vs. ~20 Tons w/original version), better traction under all circumstances, especially loaded. Version 1.1 removes the hydraulic feet and replaces them with wheels, which can be deployed while moving a heavy object. The vehicle is FAR more stable while moving a heavy load now; Version 1.1 is rated to effectively haul 30 tons up to 30 km/h @ < 15% grade. Before Version 1.1, the stats were 25 tons up to 25 km/h @ < 10% grade.
A Final Word (same note from Liebherr Custom v.1.0): Thanks for a great mobile crane Pricorde! Expect version 2.0 by February 1 -- enhances may include wheels on the extending feet for awesome stability when transporting heavy loads, rear supplemental wheels like the front supp. wheels, wider stance, more crane structural reinforcement, custom rims, hydraulically adjustable counterbalances, and more! A revision, i.e. v.1.1 or so, may be released between now and then testing functionality of upcoming features and/or fixing problems with version 1.0.
T815-ad28.zip
view details
Gold
Silver
Bronze
