|
|
|
Browsing tag Land Vehicles, found 247 matching files. (10 pages)
|
|
|
a reskin of the stock dodge. this is a 1974 dodge dart swinger designed to look like my dad's. it has aar cuda stripe that says 360 at the end. and has ralley wheels. all credit goes to the original designers of this car. and this will overwrite the original if you have it. if this will not load just aadd the .skin or .png skin fle to your original dodge folder in the name of what you want to call it. sorry if it doesnt load properly. you may just end up skinning your car.
|
| |
|
|
 One Comment, add comments here.
|
|
|
This is the final and last version of Nissan 350Z for Rigs of Rods.
Even if the original submesh model of this car is more than 2 years old its still a headturner!
Since then I edited the nearly everyday to make it look, sound and feel like its real counterpart.
Here are the most important notes:
- the body and suspension is a RoR classic setup made out of a nodes, beams and a submesh
- the engine is tuned to behave like the original one
- the transmission should be shifted manually and has real gear ratios
- the car can easely go to 250 km/h
- the suspension is set up for both drifting and highspeed stability
- the sounds are carefully collected and mixed so can get that good V6 sound in your ear
- i havnt include a tire sound. it got annoying after a while
- there is also a roadster/ convertible version in the file
- and many more things...
I havnt a specific forum tread for this car. If you have questions or want to mod the please PM me.
Enjoy this car!
Rockport19
|
| |
|
|
|
|
9 Comments, add comments here.
|
|
|
This is my "Löschgruppenfahrzeug 16/12" in english a Fire Engine.
You can open the doors of the cabin and the equipment structure with the F1 to F10 key.
In the back of the truck is a hose reel that you should load up.
So you can move the holder up and down with Ctrl+F1 and Ctrl+F2 and you can change the angle of the hose reel (Ctrl+F3 and Ctrl+F4) so its a little bit easier to hook it up (with "O")
Credits: The truck is copletely made by me (the Fire Extinguisher in the cabin is from the Sketchup Gallery and the wheel texture from RoR)
///Deutsch////
Hier ist mein Löschgruppenfahrzeig 16/12 (LF 16/12)
Man kann die Türen der Kabine sowie des Aufbaus mit den Tasten F1-F10 öffnen.
Die Schlauchhaspel hinter dem Auto kann man anhängen (mit der Taste "O")
dazu kann man die Halterung mit Strg+F1 oder Strg+F2 Hoch und Runter Bewegen.
Den Winkel der Schlauchhaspel kann man mit Strg+F3 und Strg+F4 ändern.
Credits: Das Fahrzeug habe ich bis auf den Feuerlöscher und die Textur der Reifen komplett selbst erstellt |
| |
|
|
|
8 Comments, add comments here.
|
|
|
Selfsteering Trailer with Dolly
How to use:
Pull the trailer next to the load so the rear part is at the right place.
Disconnect the rear part with F11 and pull the front part to the front attachment point.
Use a crane to put the load on, the wood load also has invisible legs so it can be loaded without crane, use F9/10.
The steering strength can be adjusted with F5/6 to fit to the length of the load.
The rear part has manual steering for special situations: F7/8, don't use when the steering is already at maximum angle!
The legs fold in automatically if you pull them up with F1, hold F2 until they fully fold out.
The load will attach on the trailer automatically once it is close enough to the right position.
To unload push F12, but attach it to a crane first and put enough tension until the trailer almost lifts off!
Thanks to Lifter for the hookgroups and triggers and for support with this project!
Thanks to fidoj for his roof part load!
Please do not modify this without my permission,
skins can be added using the skin file system:
skins-working
If this system is used properly then no need for my permission for skins.
Talk about it here:
Selfsteering-Trailer-and-Dolly
You need a RoR version with working hookgroups and triggers to use this, 0.38.40 and up! |
| |
|
|
|
|
22 Comments, add comments here.
|
|
|
Figured I would release a early version of this beast.
It is a 8x8 Oshkosh Hemtt
Features
-Mesh Body
-Animated windshield wipers
-Animated Gimbal Steering Wheel, and Gauges
-Fully independent suspension
-Realistic weight of 38,800lbs
-Realistic top speed of 58mph
-Tinted windows
-4 speed transmission
-Lockable Diffs
Animated windshield wipers controlled by CTRL+1 for low speed and CTRL+2 for higher speed. Remember to shut off one before starting the other.
Any problems post here http://www.rigsofrods.com/threads/70...sh-Hemtt/page1
|
| |
|
|
|
13 Comments, add comments here.
|
|
|
the default (old) tatra by pricorde |
| |
|
|
| | on 5/8/11
4197 downloads | UPDATE: I've been working on a variation of my own and it's complete, or close enough. It is fully submeshed and will contact with other vehicles(that must to be contactable). It's sides and tail can fold down. The rear rollcage can be lifted using Ctrl+F4/Ctrl+F6. It has ties in the back so you can drive an vehicle into it. Unfortunately all the stuff I added makes it too "tippy" to carry a vehicle into water anymore but driving on land is fine. Also has a trailer hitch that can be completely folded away if you're not going to use it. All controls are listed in-game. Have fun.
This is an Tatra 813 pack I modified from Pricordes original versions and added "Wheels2" to all of the models so you can inflate/deflate the tires. Also updated to work properly in the latest RoRs release as it was having texture issues before. Use [ to deflate and ] to inflate the tires. This is not as easy on your system as the originals were. They were only about 1300 beams before, now each has over 2800 to properly simulate the wheels.
[read more] |
|
|
No Comments yet. Add some here.
|
|
|
This is the Equipment Truck from my "Fire Department Marktheim" Package made by me.
Link to the thread: %28Package%29-Fire-Department-Marktheim-%28German-Fire-Engines%29
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-Fire Engine (MB NG 80)
-EQUIPMENT TRUCK (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D) |
| |
| Average Rating: |   | Tags: | Mercedes, Sirens, Engine sounds, Sounds, Fire service, Emergency Vehicles, Vehicle Type, Transportation, Heavy Machinery, Land Vehicles |
Downloads today: 10, all time: 4050 |
|
|
One Comment, add comments here.
|
|
|
This is a simple small bumper pull camper. It is my second camper i have made. This one is a little unsteady when going over 60. And the one with extra weight on the tires sways sometimes. I will continue to fix these problems though. The normal non weighted one does roll sometimes.
This is made by me |
| |
|
|
|
6 Comments, add comments here.
|
(updated on 17/3/13)
|
THIS HAS BEEN UPDATED:
FIXES:
THE 01 ON THE SIDE
THE RANDOM BLACK LINES.
This is the old General Lee from the Dukes of Hazard. The original Dodge Charger was by bonehead and I gave it a new paint job (skin) and then modded the engine and gearbox to make it more like the original General from the program. Hope you like it.
Credits:
Dodge Charger (.truck file): bonehead (kudos to him)
Skin and Engine: Me (FlyingGuru)
P.M. me if you like it or leave a comment below! 
Hope you like it
-FlyingGuru |
| |
|
|
|
One Comment, add comments here.
|
|
|
This is my Killer Pack it includes a crawler, bouncer, sandrail, and two differently tuned prerunners.
All completely done by Me except for rims on the sandrail. (Made by Lifter.)
They are about 85% done but I don't have time to finish them but, if you wanna finish them just give credits where they are needed.
Link to further discussion: Killer-Crawler
This was mostly a good way for me to practice making meshes and submeshes so they aren't very good. |
| |
| Average Rating: |  | Tags: | Fun Mod, Jeep, Ford, Dodge, Chevrolet, Categories, Land Vehicles, Axle Configuration, Vehicle Keywords, Allwheeldrive, 4x4, Racing, Street, Light Vehicles, Crawlers, Offroad |
Downloads today: 1, all time: 2911 |
|
|
2 Comments, add comments here.
|
(updated on 18/11/11)
|
This is my Craftsman YT3000 Lawn Tractor.
Authors:
Node and Beam - Z0M8I3
Mesh - Z0M8I3
Textures - Z0M8I3
Sounds - Z0M8I3
Features:
Mower with Deck
Slow Speed
F1/F2 Raise and Lower Deck
F3/F4 Raise and Lower Hood
Hold Horn to make Deck Engaging sound
Has Lights
Mower with Plow
Slow Speed
F1/F2 Raise and Lower Plow
F3/F4 Raise and Lower Hood
Has Lights
Mower without Deck
Faster Unrealistic Speeds for cruising around and doing jumps.
F3/F4 Raise and Lower Hood
Has Lights
Feel Free to mod as you like, But please give credit where it's due.
You can discuss the mower here: http://www.rigsofrods.com/threads/83...First-Creation
Please DO NOT steal my meshes.
UPDATE: Changed the front end and turning to reflect the real mower better. |
| |
|
|
|
16 Comments, add comments here.
|
|
|
This is an essentially imaginary truck made from scratch. I've tried to base it loosely on trucks from the 1930's and 40's but its unique. It has meshwheels, a contactable bed and i've tried to give it as close to real handling as i could. Yes its huge but my sketchup ogre exporter stopped working so i cant resize it.
Credits go to: Fordfan for the chassis and me for the mesh and chassis tweaks.
If you can make it better, go ahead  |
| |
|
|
|
No Comments yet. Add some here.
|
(updated on 20/2/11)
|
the lightning pack, so far there are two trucks that are done, one is the sleeper painted blue and one is the daycab which is option 5 and is painted a lush pink, this will replace your current files so i would back it up if you want the choice of standard or lightning, credits go to hemiboy for the permission and the truck, i modded the skin |
| |
|
|
|
5 Comments, add comments here.
|
|
|
Title:
Derbymutt INDUSTRIES Lawn Tractor
Credits:
Derbymutt: Everything
LGxDevil: Beta Tester
cartowndriver: Beta Tester
DarthCain: Beta Tester; Support
Description:
A 1980's style Riding Lawn Tractor for mowing lawn and hauling stuff.
Current Tractor List:
Derbymutt INDUSTRIES Lawn Tractor (24HP, 30HP & 300HP Versions)
To Modders:
If you ask permission, I'm fine with it. What I don't need is numerous, random mods made of my content without me being aware of their existence.
Important:
The steering looks like it breaks. It doesn't. That is how it was designed.
It is 10MB because of massive jpg files for textures.
Discussion:
Derbymutt-INDUSTRIES-Lawn-Tractor |
| |
|
|
|
2 Comments, add comments here.
|
(updated on 29/6/11)
|
Scania R 420 and R 480 Topline trucks, two different skins included.
Updated, doesn't use sections anymore.
Installation as usual, put the file in mydocuments/RigsofRods/packs.
If you have the older version then please remove it (this doesn't automatically overwrite!)
Works only in 0.36 and above.
All mesh and node and beam parts of the model are made by me, credits to pedro for the steering wheel texture.
If you want to reskin it make sure it doesn't conflict with my original pack in any way and contact me on the forums before you release any derivates of that model.
Only use one version of the truck at a time, more might crash the game.
I am not responsible if you mess up your RoR by installing or using this truck in a wrong way. |
| |
|
|
| | on 2/10/11
21503 downloads | Scania R560 6x2 "Tuning" semi and rigid tractors. Modded from 4x2 Scania R480 semi, originally made by Lenni.
Features:
[read more] | | | on 17/5/11
4764 downloads | This is skinpack for lenni's R470 and Kuru's R560 Scanias.(UPDATED) DOWNLOAD UPDATE ON FORUM LINK,ATACHMENT ON FIRST POST.
It contains 4skins:
[read more] |
|
|
2 Comments, add comments here.
|
|
|
This is my 'ROR Dairy CO-OP' Skin for the Peterbilt 359 and Beverage Trailer by Trevor.
*All Credits to Trevor for the Original Peterbilt 359 and Beverage Trailer* |
| |
|
|
|
2 Comments, add comments here.
|
|
|
Here is a mod for the dodge viper i painted it black and updated the damage.
Original authors:
Kevinmce (chassies)
3DMaxFreak (mesh) |
| |
|
|
|
One Comment, add comments here.
|
|
|
this my mod i dd all by myself
thanks to nadeox1 for showing me how to do transparent materials.
thanks to carboy for helping me with cinecam
you can load crates in the back |
| |
|
|
|
3 Comments, add comments here.
|
|
|
NEW TRUCK ADDED TO FLEET!!!!
Yep, i've been at it again. this time its a Kenworth T600 wraped in the black and red livery of R.A.D Freight Lines
Credits: Box5diesel- Chassis
Hemiboy 95- The Truck
Marco Heitala- Skin
Enjoy!
|
| |
|
|
|
2 Comments, add comments here.
|
|
|
This is the Unimog from my avatar, which I made way back in 2007 but never really finished it.
Despite that, I still recieve questions about where it can be downloaded - so I decided to finally upload it here
Please keep in mind that it was originally made for RoR 0.31a and updated to use (well, at the time) break-through 0.32 tech (aka. flares  )
It features a crappy suspension, a tipper which can be operated by F3/F4 (lower/raise tipper) and (F5/F6) close/open backboard and two (!) trailer hitches (front/back) which actually work (in 0.38, that is)
Please enjoy, mod as desired, comment on it here, but most of all: have fun! |
| |
|
|
|
13 Comments, add comments here.
|
|
|
Hello! This is my second vehicle release. It is another GTA Ammunation vehicle.
Did you not like the slowness and large amount of weight of the GTA Ammunation Truck?
Then you need the GTA Ammunation Astro!
This vehicle is not in GTA, it's just a custom.
It goes over 140 mph so I don't know the speed, but its fast.
Hydraulics:
F1 Front Down
F2 Front Up
F3 Rear Down
F4 Rear Up
Thanks to Jakebewar for the Hydraulics!
Thanks to Bonehead for the Astro!
The wheels and texture made by me.
HAVE FUN!
|
| |
| Tags: | Chevrolet, Allwheeldrive, 4x4, Heavy Duty, Offroad, Racing, Offroad, Racing, Street, Light Vehicles, Land Vehicles |
Downloads today: 5, all time: 1425 |
|
|
2 Comments, add comments here.
|
|
74Dart.zip
view details
Gold
Silver
Bronze
