These are my Winnebago's I have been working on for a couple of months. Instead of basing them on a particular year, I just used the styling cues of the early 70's. More or less if these were real I would call them licensed reproductions(Though not really Licensed). Yes, they are made in sketch... But I feel that it is one of my best mods ever. Please keep the sketch comments to your self, I would really appreciate it. Now on to the credits...
Me= The main mesh's/converting/optimizing
Google= the sink in the large Winne
Arthur Hucksack/Creak and me= The chassis
csxgp38-2 Schoolbus version
Now on to business
1. You are allowed to mod these vehicles to any extent, even the mesh
2. You are allowed to upload mods of this vehicle here or any other RoR related site.
3. You are legally aloud to have fun and post pictures to you're hearts content.
- Detailed meshes
- Accurate kinematics
- Realistic lifting capacity (refer to the board on the crane!)
Start the engine and put the Crane in NEUTRAL!
- F1/F2: Rotate
- F3/F4: Trolley (use throttle to speed up if needed)
- F5/F6: Hook Up/Down (use throttle to speed up if needed)
- F7/F8: Extend/Retract Jib
- F9/F10: Raised-jib working angle
- Ctrl+F1/F2: Assemble/Disassemble
- Ctrl+F3/F4: Outriggers
- Ctrl+F5/F6: Legs
- Ctrl+F7/F8: Trailer wheel up/down
- Ctrl+F9/F10: Turn trailer wheel
- And as usual lock loads with "o"
You can also see the commands by pressing "T" ingame.
Basical procedure: Ctrl+F4 to fold outriggers; Ctrl+F6 once for legs, Ctrl+1 [NOT F1!] to display the baseplates, Ctrl+F6 again for legs. Then Ctrl+F2 to erect the crane automatically. Jib control is on F7/F8. Jib angle is on F9/F10. Retract automatically on Ctrl+F1.
- sputnik_1: meshes, node and beam, sounds, textures
- BigBoy, Craneman, Lifter, Inviteds, Donators: testing and help, thanks a lot!
A pack of flatcars (standart 40ft, bulkhead 40ft and heavy weight 8-axle), all come with different skins.
The couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
If you enter a flatcar through the vehicle selection menu game will crash if you try to exit the flatcar, simply change into another enterable vehicle via the menu and exit there.
sputnik_1 for helping me with adjusting the node/beam.
This is my Mercedes "Kurzhauber" as Fireworker. Its not perfect at all but a cool vehicle i think. Everythink is made by me,
but with help of Dodge Charger, Murkas and Auke, whenever the wiki didnt answer my Questions.
This is my selfmade Mercedes "Kurzhauber". It has good offroad capabilitis for a truck of this kind. Suspension and Engine are in a medium setup, so i hope everyone can have fun with this. There are Mirrors and Meshwheels prepared in the truckfile, simply activate them, if your machine has enough gfx power. There will follow more different versions of this truck.
updated version - some bugfixes
added 2 trailers, semi and turnaxle trailer.
did some mesh-updates....
Big thanks to Dodge Charger, Murkas and Auke1 for their help.
This is a fire engine from the fire department Hamburg.
The Original was build from 1994/1995 by Mercedes Benz and Ziegler.
I used the tips from the older fire engines to work over the meshes so that there d´ont be any errors...i hope.
You can open the command list with the button "T" an hook on the hose reel with button "O"
The node/beam chassis and the meshes are build by me.
This is a desert island, it has no roads but tracks are marked with washed-up logs. There is a few very small settlements dotted around the island.
You start on a peninsula in the midde of the bay and drive across the sunken bridges to get to the island.
You'll need a decent offroad car as there's a section where the track dips underwater, and quite a few large mounds in the roads (where I didn't quite do the heightmap right lol)
LJFHutch: Every single non-default object in the terrain (most of the objects I have taken from his Greece map).
PsychoDog: The actual terrain.
F1 Terrain Creator: V1.2 uses trees from the F1 Test Track.
Some fixes and improvements to the island. For the full list of all the edits read the readme. The main edits I've made is to the sunken bridges on the penninsula (I've got rid of the log section since that caused some problems when you drove over it) and added a couple more tracks and buildings. Also added some crops to the farmers field so it's not just green ground any more.
Never released Versions 1.1 - 1.19 because I didn't think there was a big enough change to justify a reupload, so this is the first update. Please tell me if I've screwed anything up that was correct in V1 and I'll fix it.
This works best with 0.38.67. If you use 0.39 there may be some extra bugs (e.g. I had a lot of collision problems when I tested with anything newer than 0.38.67) and things may not look quite right. No fixes are planned for obvious reasons (0.4 is going to be the next release, not 0.39).
*PLEASE DELETE THE OLD ZIP (Zyk.zip) BEFORE YOU DOWNLOAD THIS ONE!*
This is The F-150 Raptor SVT from Ford.
Has leaf springs at the rear with some really nice travel. on the front double A arms for each wheel with fair amount of travel.
real fun to cruise. has tow hitch for towing thingies.
Not much of exciting look since it is only N/B chassis but i find those kind of trucks most pleasing.
This is just a small amphibious ATV made in the 1970's. It's by far my best creation yet!
Fully independent suspension, with moving suspension meshes. (Except on the versions without suspension)
Working control sticks.
Realistic top speed and handling.
6 versions! (Namely. Stock, Springer, Race, Crawler, Touchobut Special, and The McKay Racer)
My first fully meshed vehicle.
Me (DODGE charger) - Base vehicle and the majority of the work on this
Creak - Engine and help with floatation
Touchobut - Improvements on crawling performance (Crawler version)
Off-Roader - Request for this to be made, specs, and engine sounds
Nightmare80 - Dashboard texture
This is the first 3D model that I've ever created! I built it in Sketchup which was a mistake, but there's no use keeping it to myself!
This is a 1942 Jeep Willy that I modeled for rahulroy9202's n/b project
Excellent offroading n/b
Somewhat nice mesh, better than some of the others on the repo
Realistic gear ratios
-rahulroy9202 for all the n/b work and whole project
-Ford_Boy for n/b fine tuning and experimenting
-Off-Roader for meshes
This is NOT a final version! We already have been sponsored a new, perfect, realisitc looking mesh that will eventually get finished!
So please tell us every bug/issue that the n/b has, that way the real Willy is of excellent quality
It can load 1x 40', 45' or 48' are also possible, but that may result in too much front and rear overhang and then the container might hit the tractor unit.
The other possibilities are 2x 20', 1x 20' in the middle or at the end with retracted chassis back.
You can extend and retract the rear end to fit different containers on, and it is possible to adapt the suspension to different heights and loads,
the command keys show up in the ingame preview.
There is also a version with two containers fixed to the trailer for people who don't bother loading or unloading it.
If you want to reskin it please use the GUID system and skinzip files, then you can upload your skins to the repo.
Don't modify anything else or use parts of it on other models without my permission please.
2008 KME Predator fire engine, based on the fire engine from Butler NJ.
- Openable doors and windows
- Tilting cab
- Animated props; driveshafts, light switches, pedals, dashboard needles...
- Can simulate engine torque twisting force (RoR first)
- Comes in 2 versions; caterpillar and detroit, both equiped with allison 5 speed auto transmission
- 22 commands (F1 to Ctrl+F12)
- 9 custom lights (Ctrl+1 to 9)
-Default light bar flares showing on the roof when "M" was pressed
-Broken turn signal
-Mirrors are back again
-Added Eminox's engine/gear ratio & driving aids
-Now accept .skinzip files
-Detroit and Caterpillar version are combined into the same .truck file, use the in-game menu to make your choice.
Starling 911, this is Starling Engine 1 responding. Yes ladies and gentlemen, I this is my first upload, and I have made a skin for the KME Preditor by Cydvx and Pascal. With Cydvx's permission I am releasing it. Now mind you this is a Standalone skin, Instructions are in the zipfile. they should help you.
Credit: Cydvx and Pascal for the original KME and Blank skin [read more]